Phone

    00852-6915 1330

ic Related Articles

Stay Ahead with Expert Electronics Insights,
Industry Trends, and Innovative Tips

Battery

18650 Battery, 26650 Battery and 21700 Battery Difference Comparison

Introduction 18650 is a lithium-ion battery, where 18 means a diameter of 18mm, 65 means a length of 65mm, and 0 means a cylindrical battery, that is, they get their name from their size. As for scale, it is larger than an AA battery. 18650 battery is a rechargeable battery, has voltage of 3.7V and has capacity between 1800mAh and 3500mAh. You may also know 26650 battery and 21700 battery, what are they? and what is the difference between them? Intro To 18650 Li-ion Cells Catalog Introduction Ⅰ 18650 Battery Basic 1.1 Characteristic 1.2 Protective Function 1.3 Basic Parameters 1.4 Merits and Drawbacks Ⅱ 26650 Battery 2.1 Intro Info 2.2 Basic Parameters 2.3 18650 Battery vs 26650 Battery Ⅲ 21700 Battery 3.1 Info about 21700 3.2 Basic Parameters 3.3 21700 Battery Advantages 3.4 18650 Battery vs 21700 Battery Ⅳ Technical Specifications Comparison Ⅴ FAQ Ⅰ 18650 Battery Basic 1.1 Characteristic ① Large capacity: The capacity of a lithium battery is at least 1200mah or more, or even 3600mah, while the average battery cell is only about 500mah.② High energy storage efficiency and good stability: It can still maintain full performance output under 70°, and there is generally a protection circuit inside to prevent the battery from burning out.③ No memory effect: It is not necessary to discharge all the remaining power before charging, and it can be charged and discharged at any time, which is convenient to use.④ High charge and discharge cycle life: The number of cycles of lithium batteries is tens of thousands and the high temperature resistance is very good.⑤ Environmental protection, no toxic substances: Non-toxic, harmless, non-polluting, certified by RoHS quality. Figure 1. 18650 Battery 2200mAh 3.7V 1.2 Protective Function ① Overcharge protection: When the lithium battery is overcharged, the internal temperature rise of the battery will continue to rise, and a detection system for the battery voltage is added. When the battery overcharge voltage reaches a certain value or time period, the overcharge function will work and stop automatically to protect the battery.② Over-discharge protection: It means that the battery is always in an overloaded output state. Generally, there is discharge protection. At this time, the battery will be in a standby mode.③ Overcurrent protection: The overcurrent protection value can be adjusted, some are a few amperes, and the setting is selected according to the actual situation.④ Short-circuit protection: When the battery is short-circuited, the overcurrent protects the battery from burning.In addition to these four protection functions, some also have functions such as temperature and balance. Generally, the battery has a built-in PCM protection system with multiple protection functions. 1.3 Basic Parameters Number Item Parameter 1 Standard Voltage 7.4V 2 Rated Capacity 2200mAh 3 Continuous Working Current 1-3A 4 Overcurrent Protection Value 2-5A(adjustable) 5 Affordable Equipment Power ≤22V 6 Overcharge Protection Voltage 4.25±0.025V/Cell 7 Discharge Protection Voltage 2.50±0.05V/Cell 8 Charging Mode Constant-current and Constant-voltage 9 Maximum Charging Voltage 8.45V-8.55V 10 Recharging Current 0.2℃-0.5℃ 11 Charging Temperature 0~45℃, 45~85%RH 12 Discharge Temperature -20~55℃, 46~85%RH 13 Storage Temperature and Humidity Range Short term: more than one month -20℃~+55℃, 45~85%RH Medium term: more than three months -20℃~+45℃, 45~85%RH Long term: within one year -5℃~+20℃, 45~85%RH 14 Dimensions Brightness Reference Sample Length Reference Sample Thickness Reference Sample 15 Weight <120g   1.4 Merits and Drawbacks ✅Merits1) Large capacityThe capacity of 18650 battery is generally between 1200mah ~3600mah, and the general battery capacity is only about 800mah. If combined into a 18650 battery pack, it can easily break through 5000mah.2) Long LifeThe 18650 battery has a long service life, and the cycle life can reach more than 500 times during normal use, which is more than twice that of ordinary batteries.3) High Safety PerformanceThe 18650 battery has high safety performance. In order to prevent the short circuit of the battery, the positive and negative electrodes of the 18650 batteries are separated. Therefore, the possibility of short-circuiting has been reduced to the extreme. A protection board can be added to avoid overcharging and overdischarging of the battery, which can also prolong the service life of the battery.4) High VoltageThe voltage of 18650 lithium battery is generally 3.6V, 3.8V and 4.2V, which is much higher than the 1.2V voltage of nickel-cadmium and nickel-metal hydride batteries.5) No Memory EffectIt is not necessary to empty the remaining power before charging, which is convenient to use.6) Small Internal ResistanceThe internal resistance of the polymer battery is smaller than that of the general liquid battery, and the internal resistance of the domestic polymer battery can even be below 35mΩ, which greatly reduces the self-consumption of the battery and prolongs the standby time of the mobile phone. This polymer lithium battery that supports large discharge current is an ideal choice for remote control models, and has become the most promising product to replace nickel-metal hydride batteries.7) It can be combined in series or in parallel to form a 18650 lithium battery pack.8) Wide Range of Use18650 batteries can be employed in Notebook computers, walkie-talkies, portable DVDs, instrumentation, audio equipment, model aircraft, toys, video cameras, digital cameras and other electronic equipment.❎Drawbacks1) The biggest disadvantage of the 18650 battery is that its size has been fixed, and it is not very well positioned when it is installed in some notebooks or some products. Of course, this can also be said to be an advantage, which is compared to other polymer lithium batteries, etc. This is a disadvantage in terms of the customizable and changeable size of lithium batteries. Compared with some products with specified battery specifications, it has become an advantage.2) The production of 18650 batteries requires a protection circuit to prevent the battery from being overcharged and causing discharge. Of course, this is necessary for lithium batteries, which is also a common drawback of lithium batteries, because the materials used in lithium batteries are basically lithium cobalt oxide materials, and lithium batteries made of lithium cobalt oxide materials cannot be discharged at large currents, and their safety is poor.3) The production conditions of 18650 batteries are high, compared with general battery production, they have high requirements for production conditions, which undoubtedly increases the production cost.   Ⅱ 26650 Battery 2.1 Intro Info The 26650 battery is a cylindrical lithium battery with a diameter of 26mm and a length of 65mm. It is used in power tools, lighting, wind and solar energy storage, electric vehicles, toys, instrumentation, ups backup power supply, communication equipment, medical equipment and military lights. Figure 2. 26650 Battery Size 2.2 Basic Parameters Cycle performance: 2000 times (1C charge/1C discharge, capacity retention rate ≥80%, 100% DOD)Maximum continuous discharge current: 9.6APulse discharge current: 15A, 5sOperating temperature: Charge: 0°C ~ 55°C, discharge: -20°C ~ 60°CStorage temperature: -20°C ~ 45°CBattery weight: 86g (approx.)Nickel-cobalt-manganese ternary lithium-ion 26650 single-cell nominal voltage is generally: 3.6VNominal capacity: 4500mAh (capacity range 4500-4650mAh)AC internal resistance: ≤30mΩ (plus PTC type)Charging conditions: Cut-off voltage 4.2±0.05V, cut-off current 0.01C. (Note: Charge with 0.5C constant current to 4.2V, and charge with constant voltage until the current drops to 0.01C and cut off)Discharge cut-off voltage: 2.75VCycle performance: 500 times (1C charge/1C discharge, capacity retention rate ≥70%, 100% DOD)Maximum continuous discharge current: 13APulse discharge current: 15A, 5sOperating temperature: Charge: 0°C ~ 55°C, discharge: -20°C ~ 60°CStorage temperature: -20°C ~ 45°CBattery weight: 92g (approx.) 2.3 18650 Battery vs 26650 Battery 1) Different Rated CapacityThe rated capacity of IFR26650 is 3000mAh, and the rated capacity of IFR18650 is 1100~1400mAh.2) Different DiametersThe diameter of the IFR26650 is 26mm, and the diameter of the IFR18650 is 18mm. 3) Different Reference QualityThe production test quality of IFR26650 is 94 grams, and the IFR18650 is 45 grams.18650 lithium batteries are used in lighting, industrial supporting lithium battery packs, power tool batteries, electric bicycle batteries, power lithium battery packs, etc., while 26650 batteries are used in integrated solar street light lithium battery packs, energy storage stations, solar energy storage batteries and so on.The 26650 battery will gradually replace the 18650 battery in the application of power batteries. And with the large-scale use of lithium batteries, it will inevitably be a trend that larger-capacity 26650 batteries replace the trendy 18650 lithium batteries in the 3C era.   Ⅲ 21700 Battery 3.1 Info about 21700 The 21700 battery is a cylindrical battery with a diameter of 21mm and a height of 70.0mm. Its charge density is currently the highest energy density and lowest cost battery in the world, and it is cost-effective. Figure 3. 21700 Battery 4000mAh 3.7V   3.2 Basic Parameters The positive electrode is converted to nickel, the performance is not affected, the consistency is good, and it can be directly used as a battery pack.*Rechargeable Li-ion Cell*Size: Diameter 21mm, Length 70mm*Weight: about 65g*Rated voltage: 3.6V*Standard capacity: 4800mAh*Internal resistance: about 13 milliohms*Charging voltage: 4.2V*Discharge cut-off voltage: 2.5V*Discharge current: 10A (15-20A can be discharged instantaneously).*Applications: flashlights, scooters, LED lights, miner's lamps, lighting products, power banks, mobile power supplies, backup power supplies, computers, mobile devices, cars, bicycles, communications, medical, energy storage, solar energy, etc. 3.3 21700 Battery Advantages 1) The energy density of the 21700 type battery is higher than that of the well-known 18650 type battery. The number of single cells in use can be greatly reduced, and the cost will be reduced after grouping. The capacity of a 18650 battery is about 2600-3600 mAh, while a 21700 battery supports more than 4000 mAh, even 5000mAh has appeared on the market. And the larger capacity is increasingly beneficial to extend the battery life of modern devices.2) The single volume of the rechargeable battery is increased by 35%. Taking the Tesla 21700 rechargeable battery as an example, the energy of a single battery can be increased by 34.8ah, an increase of 35%.3) The net weight of the system software is estimated to be reduced by 10%. The total capacity is more than 21,700. With the increase of single volume and the increase of single energy ratio, the total number of batteries required under the same kinetic energy can be reduced by about 1/3, and the total number of metal components and electrical components selected for the battery pack can reduce the difficulty of managing information systems coefficient. After converting SDI (Samsung Digital Interface) to the new 21700 rechargeable battery, it was found that the system software reduced the net weight by 10% over the existing battery. 3.4 18650 Battery vs 21700 Battery The 18650 rechargeable battery has high reliability and stability, and the performance index of the 21700 battery is much higher than that of the 18650 battery. In addition, compared with other battery models, the raw materials, processing technology and technical steps of the 21700 rechargeable battery are more advanced than the 18650 rechargeable battery level. Therefore, the 18650 and 21700 production lines are the best match.   Ⅳ Technical Specifications Comparison 18650 Battery 26650 Battery 21700 Battery Nominal Voltage: 3.6V Voltage: 3.2V Voltage: 3.7V Nominal Capacity: 2,850 mAh Technologie: Lithium Iron Phosphate Capacity: 3500- 5600mAh Minimum Discharge Voltage: 3V Dimension: 26.2 (Ø) x 65.6 (H) mm Operating voltage: 2.5- 4.2V Maximum Discharge current: 1C Weight: 80g Cutoff voltage: 2 - 2.5V Charging Voltage: 4.2V (maximum) Standard capacity: 2300mAh - 0.5C (current value of 2300mA at 1C°) Weight: 55gms to 75gms Charging current: 0.5C Max. charge voltage: 3.65 ± 0.05 V Charge density (Energy per cell): 10.5- 13.7Wh Charging Time: 3 hours (approx) Inner resistance: ≤15mΩ Charge discharge cycle: 500 to 2000 Charging Method: CC and CV Max. discharge voltage: 2.0V Continuous discharge current: 20- 35 amps Cell Weight: 48g (approx) Cycle characteristic: 1500 (C/5) - 300 (10C) Optimum /Minimum charging time: 2.5 hrs to 3.5 hrs Cell Dimension: 18.4mm (dia) and 65mm (height) Working temperature: 0 ~ 55°C Discharge: -20°C ~ 60°C Charging voltage: 4.2V- 5V   Ⅴ FAQ 1. Are 18650 batteries banned?Consumers should not buy or use individual, loose 18650 lithium-ion battery cells without protection circuits due to possible fire risk, according to a warning just issued by the Consumer Product Safety Commission (CPSC). ... Samsung and Sony also warn consumers against using the cells. 2. What battery replaces the 18650?21700 battery18650 batteries are generally 3.6/3.7 volts and have capacity ratings from 2,300 to 3,600 mAh. 21700 – were designed to be a larger and higher capacity replacement for 18650 batteries. Like the 18650, the 21700 has a nominal voltage of 3.6/3.7V. The 21700 was designed to replace the 18650 in EV battery packs. 3. Are AA batteries the same as 18650?No, they are slightly larger and have completely different formula. The 18650 battery is a lithium-ion cell classified by its 18mm x 65mm size, which is slightly larger than a AA battery. They're often used in flashlights, laptops, and high-drain devices due to their superior capacity and discharge rates. 4. What makes 18650 batteries explode?The safety problem of 18650 lithium-ion battery is burning or even exploding. The root cause of these problems lies in the thermal runaway inside the battery. In addition, some external factors such as overcharge, fire source, extrusion, puncture, short circuit, etc. Will cause the battery to explode. 5. How many hours does a 18650 battery last?A standard lithium ion 18650 battery is rated to last between 300 to 500 cycles before noticing a large performance drop. That is a pretty wide range and we'll discuss some things you can do to extend your batteries life to 500 or even more cycles. 6. How can I charge my 18650 without a charger?You need a regulator to apply a minimal charge, and fortunately, small incandescent lamps in light bulbs and decorative lamps are the perfect regulators for this task. You must connect a cable to the lamp you are using and the other end of the cable will be connected to a hot battery, such as the car's battery. 7. Why are 18650 batteries so popular?The 18650 battery has a voltage of 3.6v and has between 2600mAh and 3500mAh (mili-amp-hours). These batteries are used in flashlights, laptops, electronics and even some electric cars because of their reliability, long run-times, and ability to be recharged hundreds of times over. 8. Are 21700 batteries better than 18650?The stronger heating and lower resistance of 21700 cells than the 18650 results in higher polarization in the 18650 and deviations between the voltage curves for the two formats at higher C rates. The 21700 has about 50% greater capacity and energy density than the 18650 for discharge rates up to about 3.75C. 9. Does Tesla use 21700 batteries?Tesla and Panasonic's 21700 cell was huge news when it was announced in 2017. Tesla doesn't currently use 18650 cells, though; it now uses the 21700 standard with cells measuring 21mm by 70mm. ... The new Tesla battery has gone up in size again, this time far more significantly to 4680 or 46mm x 80mm. 10. Does Tesla use 18650 batteries?Currently, Tesla mainly uses the Panasonic 18650 lithium-cobalt-acid battery, the entire battery contains thousands of independent cells, the battery costs about 135 $ / kWh, to provide 233 W / kg of energy. The future of Tesla plans to launch a new 20,700 lithium battery pack. 11. Are 18650 and 26650 batteries interchangeable?Based on their voltage and current outputs, yes, the 18650 and 26650 batteries are interchangeable. However, the two battery types are very different in size. The 26650 has a much greater diameter, so it will not fit in items designed for the slimmer 18650 battery. 12. What battery can I use instead of 26650?Well, 18650s rechargeable lithium-ion batteries can be used alone or with other batteries too including 26650 batteries in order to build battery packs and power banks or devices used for recharging a device. So, depending on the purpose, both 26650 and 18650 battery can be used together. 13. How long does it take to charge a 26650 battery?around 20 hoursIt may take around 20 hours to charge the 26650 battery fully. 14. Are 18650 batteries the same as AAA?AAA Batteries vs 18650 BatteriesAt first, AAA and 18650 batteries don't have much in common - AAA batteries are cylindrical batteries 10.5 mm (0.41 inch) in diameter and 44.5 mm (1.75 inches) in length, while 18650 batteries are cylindrical batteries 18.6 mm (0.73 inches) in diameter and 65.2 mm (2.56 inch) in length. 15. Can I use regular batteries instead of 18650?Technically yes, you can even buy an adapter that takes 3 AA's to replace an 18650, I use them in my tactical torch if the 18650 dies. However AA batteries are generally much lower capacity than an 18650 so they don't tend to last anywhere near as long. 16. Is 26650 battery same as C battery?They may appear the same and or the same size, but the C battery has a 1.5V nominal voltage while the 26650 lithium battery has a 3.6V or 3.7V nominal voltage. 17. What is the best 26650 battery for Vaping?The Hohm Grown 2 is our top pick for 26650s. It is an accurately rated 30A battery and its large capacity will have it running for much longer than your typical 18650 cell. The 26650 battery has been used for vaping for quite some time now. 18. How many 21700 batteries are in a Tesla?Currently, 4,416 (2170) cells are placed inside Tesla Model 3/Y Long-Range battery packs. In contrast, there will only be 960 cells required to fill the same space. 19.What does 18650 mean on a battery?lithium-ion batteryAn 18650 battery is a lithium-ion battery. The name derives from the battery's specific measurements: 18mm x 65mm. For scale, that's larger than an AA battery. The 18650 battery has a voltage of 3.6v and has between 2600mAh and 3500mAh (mili-amp-hours).
Ivy On 2022-02-12   8541
Mosfets

Difference and Relation Between IGBTs and MOSFETs

Introduction IGBT and MOSFET are fully controlled devices and are voltage-driven, that is, the device is turned on or off by controlling the gate voltage. In fact, the structure of the IGBT is an NPN-type MOSFET plus a P-junction, that is, an NPNP structure, which is a P-type BJT driven by MOS in principle. So what is the difference between them? What is the specific connection of them? MOSFET BJT or IGBT - Brief Comparison Catalog Introduction Ⅰ MOSFET & IGBT Review Ⅱ Si IGBT vs SiC MOSFET Ⅲ Different Requirements for Si IGBT and SiC MOSFET 3.1 ON & OFF State 3.2 Short-Circuit Protection 3.3 Interference and Delay Ⅳ IGBT Working Principle by Analogy with MOSFET Ⅴ FAQ Ⅰ MOSFET & IGBT Review MOSFET is a metal-oxide-semiconductor field effect transistor, or metal-insulator-semiconductor. The source and drain of it can be swapped, and they are both N-type regions formed in the P-type backgate. In most cases, these two regions are the same, even if the two ends are reversed, it will not affect the performance of the device. Such devices are considered symmetrical. According to the polarity of its "channel" (working carrier), MOSFET can be divided into two types: N-type and P-type, usually also called NMOSFET and PMOSFET, abbreviations including NMOS, PMOS, etc.IGBT (insulated gate bipolar transistor), is a composite fully controlled voltage-driven power semiconductor device composed of BJT (bipolar transistor) and MOS. Have the advantages of high input impedance of MOSFET and the low on-voltage drop of the GTR. When the GTR saturation voltage is reduced, the current carrying density is large, but the driving current is large; the MOSFET driving power is small, the switching speed is fast, but the on-state voltage drop is large, and the current carrying density is small. The IGBT combines the advantages of the above two devices, and the driving power is small and the saturation voltage is reduced. In simple terms, an IGBT is equivalent to a thick base PNP transistor driven by a MOS. Figure 1. N-MOSFET Architecture Ⅱ Si IGBT vs SiC MOSFET Since the differences between IGBT and MOSFET in structure, working principle and application range are quite detailed, it is impossible to express clearly in one sentence. Next, we will compare the differences between silicon (Si) IGBTs and silicon carbide (SiC) MOSFETs in detail.The electrical parameters and characteristics of Si IGBT and SiC MOS drivers are quite different. The requirements for driving of SiC MOS are also different from those of traditional silicon devices. They have the characteristics of low on-resistance and small switching loss, which can reduce device loss and improve system efficiency, and more suitable for high frequency circuits. It is widely used in new energy vehicle motor controller, vehicle power supply, solar inverter, charging pile, UPS, PFC power supply and other fields.The difference between the two is mainly reflected in the GS turn-on voltage, GS turn-off voltage, short-circuit protection, signal delay and anti-interference, as follows: Characteristic Si IGBT SiC MOSFET Drive Requirements Switching Frequency Low, >30kHz High, 50~500kHz 1) Use high power gate resistors. 2) Optimize the cooling environment. 3) Improve the efficiency of the DC-DC conversion circuit and reduce the overall loss of driving power. Threshold Voltage 5V-6V 1.6V-4.5V Negative pressure shutdown/Miller clamp to prevent false turn-on Switching Time 300ns 50ns 1) Use digital isolation driver chip, the signal transmission delay can reach 50ns, and it has relatively high consistency, and the transmission jitter is less than 5ns. 2) the low transmission delay push-pull chip is selected. Switching-On Time 15V 15V~22V 1) Priority is given to stabilizing the negative voltage to ensure that the shutdown voltage is stable. 2) A negative voltage clamping circuit is added to ensure that it does not exceed the standard during shutdown. Switching-Off voltage -15V~-5V -5V~0V Short-Circuit Withstand Time <10μs 2~5μs A diode or a resistor string is used to detect short circuits, and the shortest short-circuit protection time is limited to about 1.5μs. CMTI 15kV/μs 100kV/μs 1) The common mode anti-interference ability reaches 100kV/μs to transmit the isolation chip for signal transmission. 2) The optimized isolation transformer design is adopted, and its primary side and the secondary side are shielded to reduce mutual crosstalk. 3) The Miller clamp is used to prevent the influence of the switch of the same bridge arm.   Ⅲ Different Requirements for Si IGBT and SiC MOSFET For a fully-controlled switching device, configuring an appropriate on-off voltage is of great significance for the safety and reliability of the device. Due to the difference between IGBT and MOSFET, the requirements for the two are also different.IGBT is a field-controlled device whose turn-on and turn-off are determined by the voltage between the gate(G) and the emitter(E). The working principle of MOS tube (enhancement mode NMOSFET) is to use VGS to control the amount of "induced charges" to change the condition of the conductive channel, and then to control the drain current. 3.1 ON & OFF State 1) Silicon IGBT: Silicon IGBTs of various manufacturers have the same turn-on and turn-off voltage requirements.· The typical turn-on voltage is required to be 15V.· The shutdown voltage value range is -5V~-15V, and customers can choose the appropriate value according to their needs. The common values are -8V, -10V, -15V.· Prioritize stable positive voltage to ensure stable turn-on.2) Silicon carbide MOSFET: Different manufacturers have different switching voltage requirements:· The turn-on voltage is required to be higher than 22V~15V.· The shutdown voltage is required to be higher -5V~-3V.· Prioritize negative voltage stabilization to ensure stable turn-off voltage.· Increase the negative voltage clamping circuit to ensure that it does not exceed the standard when it is turned off. 3.2 Short-Circuit Protection The switching device has the risk of short circuit during operation, and configuring a suitable short circuit protection circuit can effectively reduce the damage caused by the short circuit during the use of the switching device. Compared to Si IGBTs, SiC MOSFETs have shorter short-circuit withstand times.1) Silicon IGBTThe time of surrender and short-circuit of Si IGBT is generally less than 10μs. When designing the short-circuit protection circuit of it, set the detection delay and corresponding time of short-circuit protection to 5-8μs.2) SiC MOSFETGenerally, the short-circuit withstand capability of SiC MOSFET modules is less than 5μs, and short-circuit protection is required to work within 3μs. A diode or a resistor string is used to detect short circuits, and the protection time is limited to about 1.5μs. 3.3 Interference and Delay 1) The impact of high dv/dt and di/dt on the system.When the switching action is performed under the condition of high voltage and high current, the switching of the silicon carbide MOSFET device will generate high dv/dt and di/dt, which will affect the driver circuit. It is very important to improve the anti-interference ability of the driver circuit for the reliable operation of the system. the following way to achieve.· Add common mode choke coil and filter inductor to the input power supply, which reduce the interference of driver EMI to low voltage power supply.· A low-pass filter is added to the rectification part of the secondary side power supply, which reduce the interference of the driver to the high-voltage side.· Use an isolation chip with a common mode immunity of 100kV/μs for signal transmission.· Optimize the isolation transformer design, and use shielding layer on primary side and secondary side to reduce crosstalk between each other.· Use Miller clamp to prevent the influence of the switch of the same bridge arm. 2) Low transmission delayUsually, the application switching frequency of silicon IGBT is less than 40kHZ, and the recommended application switching frequency of SiC MOSFET is greater than 100kHz. The increase of application frequency makes MOS require the driver to provide lower signal delay time. The transmission delay of the SiC MOSFET drive signal should be less than 200ns, and the transmission delay jitter should be less than 20ns, which can be achieved by the following methods.· Using digital isolation driver chip, the signal transmission delay can reach 50ns, and it has relatively high consistency, and the transmission jitter is less than 5ns.· Select push-pull chips with low transmission delay and short rise & fall time. Due to the conductance modulation effect, the on-state specific resistance of high voltage SiC IGBTs is much lower than that of power SiC MOSs, and does not change much as the blocking voltage rating increases. When the conductance modulation effect is fully exerted, the on-state voltage drop of the IGBT drift region is only related to the bipolar diffusion coefficient and bipolar lifetime of the carriers, and will not change with the increase of the on-current. When the operating temperature changes, the on-state voltage drop of the SiC high voltage IGBT decreases with the increase of the junction temperature. This is mainly because the bipolar lifetime of the extra carriers in the SiC epitaxial layer will increase with the increase of temperature. Although the diffusion coefficient will shrink to some extent with the increase of temperature, the greater prolongation of lifetime will eventually make the the bipolar diffusion length increased, thereby reducing the on-state voltage drop. It is especially true in n-channel devices.This is in sharp contrast to the larger increase in the forward voltage drop of the power MOS at high temperature. Silicon carbide p-channel IGBTs have higher on-state voltage drop than n-channel IGBTs at the same current density due to their larger channel resistance, but their volt-ampere characteristics do not change much with temperature. As for the applications, this is undoubtedly an advantage. Figure 2. Comparison of characteristics between SiC IGBT and power MOS under the Same Condition of Withstand Voltage of 20kV. It is not difficult to calculate from the intersection of the equal power consumption curve in the figure and the on-state characteristic curves of these devices: corresponding to the same power consumption of 300W/cm2, the ratio of the on-state current of the silicon carbide IGBT to the silicon carbide power MOS versus p-channel devices and n-channel devices are different, they are 1.5 and 1.8 at room temperature, respectively, and increase to 2.7 and 3.5 at 225°C, indicating that high-voltage and high-current SiC IGBTs are more suitable for high-temperature applications.In a word, compared with Si IGBT, SiC MOSFET not only improves system efficiency, power density and operating temperature, but also puts forward higher requirements for the driver. In order to make silicon carbide MOSFET better in the system, it is necessary to give SiC MOSFET a appropriate driver.   Ⅳ IGBT Working Principle by Analogy with MOSFET IGBT is a Darlington pair composed of GTR and MOSFET: part of which is MOSFET driver, and the other part is thick-base PNP transistor. Figure 3. IGBT Architecture Its simplified equivalent circuit is shown in the figure below, and RN in the figure is the modulation resistance in the base area of the PNP transistor. It can be clearly seen from this circuit that the IGBT is a composite device of Darlington configuration composed of transistors and MOSFET, where the transistor in the figure is a PNP transistor, and the MOSFET is an N-channel field effect transistor, so the IGBT of this structure is called an N-channel IGBT, and its symbol is N-IGBT. Similarly there are P-channel IGBTs, namely P-IGBTs. Figure 4. Simplified Equivalent Circuit The electrical graphic symbols of the IGBT are shown in the figure. IGBT is a field-controlled device, and its turn-on and turn-off are determined by the voltage UGE between the gate and the emitter. When the gate-emitter voltage UCE is positive and greater than the turn-on voltage UCE (th), a channel is formed in the MOSFET and is a PNP. The N-type transistor provides the base current to turn on the IGBT. At this time, the holes (minority carriers) injected into the N- region from the P+ region modulate the conductance of the N- region, reduce the resistance RN of the N- region, and make the IGBT also has a small on-state voltage drop. When no signal or reverse voltage is applied between the gate and emitter, the channel in the MOSFET disappears, the base current of the PNP transistor is cut off, and the IGBT is turned off. It can be seen that the driving principle of IGBT is basically the same as that of MOSFET.① When UCE is negative: J3 junction is in reverse bias state, and the device is in reverse blocking state.② When UCE is positive: UC< UTH, the channel cannot be formed, and the device is in a forward blocking state; UG> UTH, an N-channel is formed under the insulating gate, and conductance is generated in the N- region due to the interaction of carriers modulation so that the device is conducting forward. Figure 5. Hybrid Switch Using Si IGBT and SiC MOSFET 1) ONThe structure of IGBT silicon is very similar to that of power MOSFET, and the main difference is that JGBT adds a P+ substrate and an N+ buffer layer, in terms of it, one MOS drives two bipolar devices (devices with two polarities). The application of the substrate creates a J junction between the P, and N+ regions of the tube. When the positive gate bias causes the inversion of the P base region under the gate, an N-channel is formed, and an electron flow occurs at the same time, and a current is generated exactly in the manner of a power MOSFET. If the voltage produced by this electron flow is in the range of 0.7V, J1 will be forward biased, some holes will be injected into the N- region, and the resistivity between N- and N+ will be adjusted, which reduces the power conduction the total loss of the pass and initiates a second charge flow. The end result is the temporary emergence of two different current topologies within the semiconductor layer: an electron flow (MOSFET current), and a hole current (bipolar). When UCE is greater than the turn-on voltage UCE(th), a channel is formed in the MOSFET to provide base current for the transistor, and the IGBT is turned on. 2) On-State Voltage DropThe conductance modulation effect reduces the resistance RN and reduces the on-state voltage drop. The so-called on-state voltage drop refers to the tube voltage drop UDS when the IGBT enters the on-state, and this voltage decreases with the rise of UCS. 3) Shut DownWhen a negative bias is applied to the gate or the gate voltage is lower than the threshold value, the channel is disabled and no holes are injected into the N-region. In any case, if the current of the MOSFET decreases rapidly during the switching phase, the collector current decreases gradually. This is because there are still minority carriers in the N layer after the commutation starts. This reduction in residual current value (wake) is entirely dependent on the charge density at turn-off, which in turn is related to several factors, such as the number and topology of dopants, layer thickness and temperature. The decay of minority carriers makes the collector current have a wake waveform. Collector current will cause increased power dissipation and cross-conduction problems, especially on devices that use freewheeling diodes.Considering that the wake is related to the recombination of minority carriers, the current value of the wake should be closely related to the Tc, IC of the chip, and has a close relationship with the mobility of holes. Therefore, depending on the temperature reached, it is feasible to reduce the undesirable effects of this current on the end equipment design. When a back pressure or no signal is applied between the gate and the emitter, the channel in the MOS disappears, the base current of the transistor is cut off, and the IGBT is turned off. 4) Reverse BlockingWhen a reverse voltage is applied to the collector, the junction is reverse biased and the depletion layer expands to the N-region. Because the thickness of this layer is reduced too much, an effective blocking ability will not be obtained, so this mechanism is very important. In addition, if the size of this region is increased too much, the voltage drop will continuously increase. 5) Forward BlockingWhen the gate and emitter are shorted and a positive voltage is applied at the collector terminal, the junction is controlled by the reverse voltage. At this time, the depletion layer of the N drift region is still subjected to the externally applied voltage. 6) LatchICBT has a parasitic PNPN thyristor between the collector and the emitter. Under special conditions, this parasitic device will turn on. This phenomenon increases the amount of current between the collector and the emitter, reduces the controllability of the equivalent MOSFET, and often causes device breakdown problems. The thyristor turn-on phenomenon is known as IGBT latch-up. Specifically, the causes of such defects vary, but are closely related to the state of the devices.   Ⅴ FAQ 1. Are there SiC IGBT?Along with the increasing maturity for the material and process of the wide bandgap semiconductor silicon carbide (SiC), the insulated gate bipolar transistor (IGBT) representing the top level of power devices could be fabricated by SiC successfully. 2. Where are SiC MOSFETs used?The primary automotive applications for SiC power MOSFETs, diodes, and modules are onboard electric vehicle (EV) chargers, DC/DC converters, and drivetrain inverters. Plug-in hybrid EVs and battery EVs (BEVs) use onboard chargers to “refuel” the vehicle battery either at home or at a public charging station. 3. What is SiC MOSFET?Silicon Carbide (SiC) MOSFETs exhibit higher blocking voltage, lower on state resistance and higher thermal conductivity than their silicon counterparts. SiC MOSFETs are designed and essentially processed the same way as silicon MOSFETs. 4. Can MOSFET replace IGBT?Due to the higher usable current density of IGBTs, it can usually handle two to three times more current than a typical MOSFET it replaces. This means that a single IGBT device can replace multiple MOSFETs in parallel operation or any of the super-large single power MOSFETs that are available today. 5. What are the advantages of silicon carbide?Silicon carbide MOSFETs have a critical breakdown strength that is 10x of silicon, and silicon carbide MOSFETs can operate at much higher temperatures, provide higher current density, experience reduced switching losses, and support higher switching frequencies. 6. What are the advantages of silicon carbide (SiC) over silicon (Si)?The advantage of SiC starts in the material itself having a 10x higher dielectric breakdown field strength, 2x higher electron saturation velocity, 3x higher energy bad gap and 3x higher thermal conductivity than Silicon. 7. What is the difference between silicon and silicon carbide?Silicon has a breakdown voltage of around 600V, while silicon carbide can withstand voltages 5-10 times higher. ... Silicon carbide can switch at nearly ten times the rate of silicon, which results in smaller control circuitry. 8. What is SiC in semiconductor?SiC (silicon carbide) is a compound semiconductor composed of silicon and carbide. SiC provides a number of advantages over silicon, including 10x the breakdown electric field strength, 3x the band gap, and enabling a wider range of p- and n-type control required for device construction. 9. Which is better MOSFET or IGBT?When compared to the IGBT, a power MOSFET has the advantages of higher commutation speed and greater efficiency during operation at low voltages. What's more, it can sustain a high blocking voltage and maintain a high current. ... The IGBT is also a three terminal (gate, collector, and emitter) full-controlled switch. 10. Why use an IGBT instead of a MOSFET?The main advantages of IGBT over a Power MOSFET and a BJT are: 1. It has a very low on-state voltage drop due to conductivity modulation and has superior on-state current density. ... It canbe easily controlled as compared to current controlled devices (thyristor, BJT) in high voltage and high current applications. 11. Why is MOSFET preferred?Mosfet provides a very good isolation between the gate and the other two terminals compared to bjt. Mosfet can handle more power compared to BJT. The mosfet has a very low power loss and a high speed. Voltage signals can easily operate a mosfet, so it is used in many digital circuits. 12. Where are MOSFETs used?Power MOSFETs are commonly used in automotive electronics, particularly as switching devices in electronic control units, and as power converters in modern electric vehicles. The insulated-gate bipolar transistor (IGBT), a hybrid MOS-bipolar transistor, is also used for a wide variety of applications. 13. Why IGBT is very popular nowadays?With its lower on-state resistance and conduction losses as well as its ability to switch high voltages at high frequencies without damage makes the Insulated Gate Bipolar Transistor ideal for driving inductive loads such as coil windings, electromagnets and DC motors. 14. How many terminals are in a MOSFET?four terminalsThe MOSFET has four terminals: drain, source, gate, and body or substrate. 15. Why is IGBT bipolar?IGBTs is a bipolar device that utilizes two types of carriers, electrons and holes, resulting from the complex configuration that features a MOSFET structure at the input block and bipolar output, making it a transistor that can achieve low saturation voltage (similar to low ON resistance MOSFETs) with relatively fast. 16. How many types of IGBT are there?two typesInsulated Gate Bipolar Junction Transistor (IGBTs) are normally classified into two types. (ii) Punch Through [PT-IGBT]. These IGBTs are also referred to as symmetrical and asymmetrical IGBTs. These varieties of IGBT differ widely with regard to their fabrication technology, structural details etc. 17. What is full MOSFET?MOSFET stands for metal-oxide-semiconductor field-effect transistor. It is a field-effect transistor with a MOS structure. Typically, the MOSFET is a three-terminal device with gate (G), drain (D) and source (S) terminals. 18. How does an IGBT work as a switch?As defined by being a transistor, an IGBT is a semiconductor with three terminals which work as a switch for moving electrical current. Just as the word “gate” suggests, when voltage is applied to the gate, it opens or “turns on” and creates a path for current to flow between the layers. 19. Can I use transistor instead of MOSFET?It very much depends on the application. BJTs can be cheaper than FETs. This is especially true for high voltage switching where the much larger die area of FETs make them much more expensive. 20. Can IGBT conduct in reverse direction?No. The IGBT cannot conduct current in the reverse direction (from emitter to collector) even with a positive Vge applied to it, because it has a bipolar-type structure. ... However, the gate has no control over this reverse current flow; it is simply the forward biasing of the diode that allows it.
Ivy On 2022-01-28   2217
Resistors

Using Fuel Pump Relay-Fault Detection and Predictive Maintenance

IntroductionⅠ Operating Principle of Fuel Pump Relay1.1 How does the Fuel Pump Relay Work?1.2Working Principle of Vehicle Electric Fuel PumpⅡ Fuel Pump Relay Testing and ReplacementⅢ Fuel Pump Relay Inspection and Maintenance Structure FlowⅣ Detection Methods for Faults without Fault Memory of Fuel Pump RelayⅤ Inspecting the Fuel Pump Relay UnitⅥ What Causes Fuel Pump Relays to Fail?Ⅶ How to Prevent Fuel Pump Relay from Getting Damaged after Replacement?Ⅷ How to Diagnose a Bad Fuel Pump Relay?Ⅸ FAQIntroductionWhat is the fuel pump relay? How does it work? There are some measures to deal with the failure of fuel pump relay. Just keep reading our guide to find out!Ⅰ Operating Principle of Fuel Pump RelayWhen the engine starts, the fuel pump relay turns off. The oil pressure sending unit supplies power to the fuel pump at this point. When you turn off the ignition, the fuel pump relay is re-engaged for a short period, allowing the fuel pump to power down and shut off.Figure 1 Operating principle 1.1 How does the Fuel Pump Relay Work?A fuel pump relay functions similarly to a light switch in your home, turning on the lights.The main difference is that there is no direct contact with the switch; rather, the switch is triggered when a sufficient amount of electricity accumulates.The fuel pump is in charge of regulating the pressure within the engine to ensure proper operation.When the engine requires fuel, the pressure is increased to start the injection of fuel into the engine.If there was insufficient pressure, the engine would not receive the necessary fuel, which could result in a misfire.The difference is that instead of directly turning on the internal switch, the control circuit is turned on. This coil then generates an electromagnetic field, closing a pair of metal contacts within the relay. The metal contacts are linked to a controlled circuit, which ultimately activates the fuel pump.1.2 Working Principle of Vehicle Electric Fuel PumpThe electric fuel pump assembly is installed and immersed in fuel in the fuel tank. It is controlled by the ECM and sucks fuel from the fuel tank, filters, and regulates pressure before delivering it to the fuel manifold.The electric fuel pump assembly consists of a fuel pump, a fuel filter, an engine oil pressure regulator, and an oil level sensor.A DC motor, a vane pump, and an end cover comprise the electric fuel pump (integrated check valve, pressure relief valve, and anti-electromagnetic interference components).Figure 2 The wiring diagram of the electric fuel pumpWhen the ignition switch is turned on, the main relay is activated to provide 12V power to the fuel pump relay. At this point, the fuel pump relay will be activated for approximately 2 seconds, causing the electric fuel pump to operate for 2 seconds. Raise the oil pressure in the fuel main pipe to a safe level before starting the engine.When you turn off the engine, the electric fuel pump shuts down. At this point, the one-way valve is closed to maintain residual pressure in the fuel line, making it easier to restart the engine. When the oil pressure on the oil outlet side becomes excessively high, the safety valve opens to drain the fuel, preventing the fuel pressure from becoming excessively high.Figure 3 Electric fuel pumpThe vehicle's current electric fuel system is a non-return system. An oil pressure regulator integrated with the fuel pump assembly adjusts the fuel system pressure to around 380kPa. The fuel that has passed through the fuel filter is redirected to the oil pressure regulator. If the oil pressure is too high, open the regulator's oil return valve to drain the oil and stabilize the oil pressure to a certain value. To detect the fuel level, an oil level sensor is installed in the fuel pump assembly. The sliding resistance principle is used by the oil level sensor. When the oil level drops, the float floating on the oil surface moves downward, causing the contact of the sliding resistance to move downward, and the sensor's resistance value to rise. The oil level sensor has a resistance range of 3108. (depending on the car models).Ⅱ Fuel Pump Relay Testing and Replacementvideo: How to test and replace a fuel pump relayHow to test fuel pump relay? You will learn from this video. In the same time, the principles shown here apply to most vehicles.Ⅲ Fuel Pump Relay Inspection and Maintenance Structure FlowDetection methods for faults without fault memory of Fuel pump relay1. Fuel pump relay fault detection and maintenance schemeThe fault memory of engine control unit is read by detector. Short circuit of fuel pump control to positive pole, short circuit of fuel pump control to ground and open circuit of fuel pump control are three common fault memories related to fuel pump relays.For the above three fault modes, the following detection and maintenance methods are formulated respectively:2. Fuel pump control for positive pole short circuit repair method.First, disconnect the fuel pump relay plug and measure the voltage between the relay slot 2 pins and grounding when the ignition switch is turned on. The rated value should be between -1V and 1V; if the measured value is not within this range, a short-circuit to the positive pole of the connecting 2-pin excitation line exists. If the measured value falls within the above-mentioned rated range, there is no short-circuit to the positive pole. Then, look for any disconnection. Turn off the ignition switch first, then unplug the engine ECU plug, and measure the resistance between pin 2 of the relay slot and pin 80 of the engine ECU plug (for the new Jetta model, the engine ECU controls the fuel pump relay ground terminal through pin 80). If the resistance exceeds 30, the circuit is open. If the resistance is less than 30, the circuit from the fuel pump relay to the engine ECU is satisfactory. Based on the above findings, the fault can only be found in the relay itself, and the relay should be replaced.3. Method for repairing a fuel pump control to a ground short circuit faultTurn off the ignition, disconnect the fuel pump relay, and measure the resistance between relay slot pin 2 and the engine ground point. If the resistance value is less than 9MQ, the excitation line has been short-circuited to the ground. If the resistance value is greater than 9MQ, the line is in good condition. The short-circuit point must be located within the relay, and the relay must be replaced.4. Fuel pump control open-circuit fault repair methodCheck to see if the appropriate fuses and fuel pump relays are properly installed, dirty, or broken. When no fault is found, remove the fuel pump relay and measure the voltage between pins 1 and 3 of the fuel pump, as well as the engine grounding (i.e. check the power supply of the relay). If the measured voltage is less than 11.5V, it means that the wire connecting the detection point to the battery is broken. If the measured voltage is greater than 11.5V, the voltage supply is functioning normally. The relay actuator and fuel pump should then be checked. If the fuel pump still does not work, the fault is not with the relay. It should keep checking the line between the relay and the fuel pump. If the problem persists after removing the line fault, the fault can only be in the fuel pump, which should be replaced: If the fuel pump is powered on after bridging 1 and 5 Pins, the fault is limited to the active part of the relay and the relay itself, and the detection method is the same as 1" Maintenance method of fuel pump control for Positive pole Short-circuit Fault ".Ⅳ Detection Methods for Faults without Fault Memory of Fuel Pump RelayWhen the detector is used to diagnose the fuel pump executive components, the following three execution results will be obtained. We will examine the three different execution results item by item:1. The fuel pump is turned on and running.In the absence of a fault code, the correct activation of the fuel pump indicates that the system is fault-free.2. When the fuel pump relayis activated, the action of the fuel pump's non-reactive relay indicates that the excitation line is normal. The relay, the positive power supply, and the fuel pump are the three components that must be tested. Pull out the fuel pump relay, measure its slot 1 foot and 3 feet to engine ground between voltage (i.e., check the relay power supply): if the measured voltage is less than 11.5 v, the related testing point between thebattery wire break, if the voltage is greater than 11.5 v, the voltage supply is normal. Checked the oil pump parts, using the transfer line bridge slot on the 1,5 foot: if the fuel pump still does not work, the fault is not in the relay, should continue to check the path of the relay to the fuel pump, still did not solve the problem, after exclusion of line fault, fault can only be in the fuel pump, fuel pump needs to be replaced, if the bridge after 1, 5-foot pump electricity work, illustrates the fault in the relay, the fuel pump relay must be replaced.3. The relays for the fuel pump and the fuel pump are not working, necessitating a thorough inspection of all relevant parts. Check to see if the appropriate fuses and fuel pump relays are properly installed, dirty, or broken. Remove the engine ECU and short-circuit the terminal connecting the engine ECU plug to the fuel pump relay excitation line (pin 2) to ground if no fault is found (for the new Jetta, the corresponding terminal number is 80). If the fuel pump is running at this time (the relay must act), the system from the relay to the fuel pump is functioning normally, and the fault may be in the engine ECU. The phenomenon is the same if the fuel pump is not running and only the relay is activated "The fuel pump relay is turned on.  If both the relay and the fuel pump are not operational, the relay will not function normally even if the engine ECU sends the grounding excitation signal. At this point, the power supply, executive, and excitation parts of the relay must be checked one by one.The method described above for detecting a fuel pump relay can also be used as a guide for detecting other relays. We need to conduct specific analyses for different models during the actual maintenance process.Ⅴ Inspecting the Fuel Pump Relay UnitWhen you open the unit, the first thing you should do is a smell for a faint burnt odor. This would indicate whether or not the temperature has risen too high in there.Next, look for burn marks that indicate an excessive level of resistance. They're usually found near the offending connections or components on the circuit board.Then, place your thumb on the large relay on the circuit board and wiggle it. If the big part of the relay wiggles at all (not the small hinged part), the solder joints are bad and must be re-soldered.Figure 4 bad-solder-jointsExamine the contact points between the relay's hinged and stationary parts. It's difficult to say how much pitting or discoloration is normal, but all of the ones I've seen (including the perfectly good ones) have some pitting. If they're really bad, sanding them may be able to extend their life, but it's impossible to say how much.Check that all of the solder joints on the solder side of the circuit board are smooth and shiny. Poor soldering is indicated by a dull or crinkly appearance.Ⅵ What Causes Fuel Pump Relays to Fail?A fuel pump relay failure can occur for a variety of reasons, including:1The relayshave windings that can be burned due to high voltage short circuits.2A faulty relay is caused by a faulty coil or faulty connections.3Any unfavorable situation, from environmental dust to a sudden voltage increase, can harm the fuel pump relay.4Failure of the relay may occur due to the breaking of inner terminals, corrosion around the electrical contacts, breaking of coil wires, and other factors.5Overheating of the relay may cause it to melt. A burned relay may also cause a meltdown in the fuse panel. It is frequently difficult to remove, and as a result, the entire fuse box must be replaced.l?6When there are a lot of electrical failures, the fuel pump usually wears out at the same rate.7Before you replace the relay, you must first identify and resolve the issue that caused it to fail.8The electric fuel is powered solely by the engine, not by the fuel pump relay. By remaining submerged in the fuel, the relay only keeps the fuel temperature cool.9Keep your fuel tank full at all times to avoid shortening the life of your fuel pump relays.10When you turn off your vehicle's engine with a low fuel level, the engine can drain from the priming chamber into the fuel delivery system.11Without enough fuel, thefuel pumpwill run hot and unprimed, potentially damaging the pump motor. As a result, when the tank is full of gas, a fuel pump relay turns off.12The engine should not be started if the fuel pump relay is still hot.13Parking one's car on the front porch in the sun is a common blunder. It heats the engine, causing the fuel pump relay to backfire. Finally, it takes time for the vehicle to start and for the fuel to cool.14The relays have a winding that is frequently burned due to the high voltage. When the relays burn out or become damaged, they must be replaced.15Because the fuel pump relay controls the fuel pump, any fault with the relay can cause problems with the pump, causing the vehicle to drive incorrectly.Ⅶ How to Prevent Fuel Pump Relay from Getting Damaged after Replacement?Overloading of relays. Every relay has a maximum capacity, and exceeding that capacity may cause the contacts to fail.Figure 5 Fuel pump relay replacementHigh discharged currents may flow from power supplies with capacitors in their outputs. This heats and melts the contacts. Current limiters solve the majority of these issues, but they do not control capacitive discharge effects. They may also take some time to respond because the limiters use a feedback loop as part of the power supply control system.Digital I/O cards such as models 40-411, 40-412, and 40-413 can help to reduce the occurrence of welds caused by faulty test targets.Frequently, an excellent high-quality relay solves the majority of the problems.Keeping the relay clean is also good preventative maintenance. Allow the relay to dry after gently rubbing it with ethanol.Ⅷ How to Diagnose a Bad Fuel Pump Relay?Typically, car problems are caused by faulty fuel pump relays. A faulty relay is the result of a faulty coil or connection. To determine the cause of the bad relay, pull it out of the socket.Figure 6 How to tell if fuel pump relay is badConsult a service manual to locate your fuel pump relay. Before beginning, this task, learn more about how a multimeter or ohmmeter works.Check the Coilstep 1: Set up the multimeter to read the ohms. The ohm scale resembles a horseshoe in shape.Step 2: To test the multimeter, touch the meter leads together. You should get a reading of zero ohms.When the test leads across the relay's coil are touched, they should read around 70 ohms. Assume the meter reads zero or infinite ohms. In that case, the coil is either shorted or open at the same time, and your relay is faulty.Examine the ContactsStep 1: Connect the test leads from one side of the relay coil to the chassis ground.Step 2: Connect the other test lead to the vehicle's battery. The relay should be turned on, and you should hear or feel a click.      5. Connect the multimeter to the relay's COMMON and NORMALLY OPEN contacts, and the relay should read zero. If this does not occur, the contacts are not connected because the relay is faulty.                 6. Exercise caution when connecting your test leads to the battery. If the battery positive is too close to the ground connection, a spark can occur.      7. You will require the following items:Your relay's diagramMultimeterTwo alligator clips on both ends of two electronic test leadsⅨ FAQ1. What could result in a misfire?The engine would not receive the necessary fuel.2. What is responsible for regulating the pressure within the engine?The fuel pump.3. How much power does the main relay provide to the fuel pump relay?12V4. How does the electric fuel pump operate when the ignition switch is turned on?Raise the oil pressure in the fuel main pipe to a safe level before starting the engine5. What happens when the oil pressure on the oil outlet side becomes excessively high?The safety valve opens to drain the fuel6. Where are burn marks usually found?Near the offending connections or components on the circuit board.7. What is the first thing you should do when you open the Fuel Pump Relay Unit?Place your thumb on the large relay on the circuit board and wiggle it8. What can high discharged currents flow from power supplies with?Capacitors9. What solves the majority of the problems?An excellent high-quality relay 10. What do you need to know about a bad fuel pump relay?How a multimeter or ohmmeter works.11. What do you need to do to diagnose a bad fuel pump relay?Set up the multimeter to read the ohms12. What is the reading of a bad fuel pump relay?Zero ohms.
kynix On 2022-01-27   4085
FPGA

FPGA - Characteristics, New Applications and Development Trend

Introduction Everyone has heard of FPGA more or less, such as Bitcoin mining, or Microsoft said before that it will use FPGA instead of CPU in the data center. So what exactly is it? Why use it? Compared with CPU, GPU, and ASIC, what are the characteristics of FPGA? FPGA is a chip that can reconfigure circuits and is a hardware reconfigurable architecture. Through programming, users can change its application scenarios at any time, and it can simulate various parallel operations of hardware such as CPU and GPU. By interconnecting with the high-speed interface of the target hardware, the FPGA can complete the low-efficiency part of the target hardware, thereby achieving acceleration at the system level. What Is an FPGA? Catalog Introduction Ⅰ FPGA vs CPU vs GPU vs ASIC Ⅱ Five Advantages of FPGA 2.1 Performance 2.2 Time-to-Market 2.3 Cost 2.4 Stability 2.5 Long-Term Maintenance Ⅲ New Applications of FPGA Ⅳ Development Trend of FPGA Ⅴ FAQ Ⅰ FPGA vs CPU vs GPU vs ASIC The core difference between FPGA and CPU, GPU, ASIC chips, etc. is that the connection and logic layout of the underlying operation unit are not solidified. Users can program the logic unit and switch array through EDA software to configure the function, so as to realize the integration of specific functions.FPGA appears as a semi-custom circuit in the field of application-specific integrated circuits (ASIC), which not only solves the shortcomings of custom circuits, but also improves the limited number of original programmable device gate circuits. Compared with ASIC chips, an important feature of FPGA is its programmable characteristics, that is, the user can specify the FPGA to realize a specific digital circuit through the program. Furthermore, FPGA chips are one of the best choices for small batch systems to improve system integration and reliability. Figure 1. FPGA Basic Structure So why is FPGA so fast? This is all because the computer's CPU(central processing unit) and GPU(graphics processing unit) belong to the von Neumann structure, with instruction decoding and execution, and shared memory. FPGAs, on the other hand, are instruction-free and memory-free architectures that make FPGA chips much more energy-efficient than CPUs or even GPUs. Figure 2. Von Neumann Structure In the von Neumann architecture, since the execution unit (such as the CPU core) may execute any instruction, so an instruction memory, a decoder, an operator of various instructions, and branch and jump processing logic are required. Due to the complex control logic of the instruction stream, it is impossible to have too many independent instruction streams. Therefore, the GPU uses SIMD (single instruction, multiple data) to allow multiple execution units to process different data at the same pace, and the CPU also supports SIMD instruction. The function of each logic unit of the FPGA has been determined during reprogramming, and no instructions are required. Figure 3. Computer CPU If the GPU is used for acceleration, in order to fully utilize the GPU computing, the batch size cannot be too small, and the delay will be on the order of milliseconds. Using FPGA to accelerate, only microsecond-level PCle delay is required. Why is FPGA so much lower latency than GPU? This is basically an architectural difference. FPGAs have both pipeline parallelism and data parallelism, while GPUs have almost only data parallelism (with limited pipeline depth).For example, FPGA chips can change the running hardware design on the chip every few seconds, while chips such as CPU and ASIC are already solidified when they leave the factory and cannot be changed. If ASIC, CPU, GPU, etc. are built buildings, and the routes of rooms, corridors, and stairs in the building have been fixed, while the interior of FPGA is similar to the magic staircase in Hogwarts, which can change the route of room to room at any time. In addition, FPGA does not need to compile the instruction system at the software application level like CPU and GPU. To program FPGA, use hardware description language, and directly compile and burn it into a combination of transistor circuits, that is, directly use transistor circuits to implement user algorithms.The biggest feature of FPGA is its flexibility. It can realize any digital circuit you want and can customize various circuits. Reduce the shackles of special chips, truly tailor-made for your own products, you can flexibly change the design during the design process, and have field programmability, so it is especially suitable for applications that require continuous changes in physical operation logic, such as AI algorithm optimization, data center applications, etc. Architecture Throughput(int ops) Delay Flexibility CPU ~1T N/A Very High GPU ~10T ~1ms High FPGA(Stratix V) ~1T ~1us High FPGA(Stratix 10) ~10T ~1us High ASIC ~10T ~1us Low The FPGA is set up by the RAM stored on the chip to reset its working state, so the on-chip RAM needs to be programmed when working. Users can use different programming methods according to different configuration modes, which can be said to be very flexible and convenient. The FPGA has the following configuration modes:🔺Parallel Mode: Parallel PROM, Flash configures FPGA.🔺Master-Slave Mode: One PROM configures multiple FPGAs.🔺Serial Mode: Serial PROM configures FPGA.🔺Peripheral Mode: The FPGA is used as a peripheral of the microprocessor and programmed by the microprocessor. Computational performance compared with CPU: For example, Stratix series FPGAs perform integer multiplication operations, and their performance is equivalent to that of a 20-core CPU, and for floating-point multiplication operations, their performance is equivalent to an 8-core CPU.Computational performance compared with GPU: FPGA performs integer multiplication and floating-point multiplication operations. There is an order of magnitude difference in performance compared to GPU. The computing performance of GPU can be approached by configuring multipliers and floating-point operation components. Figure 4. CPU and GPU Architecture Diagram The core advantage of FPGA for performing computation-intensive tasks: tasks such as search engine sorting and image processing have strict requirements on the return time limit of results, and it is necessary to reduce the delay of computing steps. Under the traditional GPU acceleration scheme, the data packet size is large, and the delay can reach the millisecond level. Under the FPGA acceleration scheme, the PCIe latency can be reduced to the microsecond level. Driven by long-term technology, the data transmission delay between CPU and FPGA can be reduced to less than 100 nanoseconds.The FPGA can build the same number of pipelines (pipeline parallel structure) for the number of data packet steps, and the data packets can be output immediately after being processed by multiple pipelines. The GPU data parallel mode relies on different data units to process different data packets, and the data units need to be input and output consistently. For stream computing tasks, the FPGA pipeline parallel structure has a natural advantage in latency. FPGA is used to process communication-intensive tasks and is not limited by network cards. It outperforms CPU solutions in terms of packet throughput and delay, and has strong delay stability. Therefore, FPGAs have obvious advantages over CPUs when performing large data processing tasks with high repetition rates.By programming the FPGA, the user can change the internal connection structure of the chip at any time to realize any logic function. Especially in industries with immature technical standards or rapid development and change, FPGA can effectively help enterprises reduce investment risks and sunk costs, and is a functional and economical choice. Figure 5. Computer GPU With the evolution of intelligent market demand, highly customized chips (ASIC SoC) have led to a sharp increase in market risks due to the large scale of non-repetitive investment and long R&D cycle. Relatively speaking, FPGA has advantages in the field of parallel computing tasks, and can replace some ASICs in the field of high performance and multi-channel. The demand for multi-channel computing tasks in the field of artificial intelligence (AI) drives the evolution of FPGA technology to the mainstream. Figure 6. ASIC SoC Ⅱ Five Advantages of FPGA 2.1 Performance Taking advantage of hardware parallelism, FPGAs break the sequential execution model and complete more processing tasks per clock cycle, surpassing the computing power of digital signal processors (DSPs). BDTI(Big Data Test Infrastructure), a well-known analysis and benchmarking company, has published benchmarks that show that in some applications, FPGAs can handle many times more processing power per dollar than DSP solutions. Controlling input and output (I/O) at the hardware level provides faster response times and specialized functionality to meet application needs. 2.2 Time-to-Market Despite increasing time-to-market constraints, FPGA technology offers flexibility and the ability to rapidly prototype. Users can test an idea or concept and complete verification in hardware without going through the lengthy manufacturing process of custom ASIC design. This allows users to make incremental modifications and iterate FPGA designs in hours, saving weeks. Commercial off-the-shelf (COTS) hardware provides different types of I/O connected to user-programmable FPGA chips. The increasing popularity of high-level software tools reduces the learning curve and abstraction layers, and often provides useful IP cores (pre-built functions) for advanced control and signal processing. 2.3 Cost The non-recurring engineering (NRE) cost of custom ASIC design far exceeds the cost of FPGA-based hardware solutions. The huge initial investment in ASIC design shows that OEMs need to ship thousands of chips each year, but more end users need custom hardware capabilities that enable the development of tens to hundreds of systems. The nature of programmable chips means that users can save on manufacturing costs as well as long lead times for assembly. System requirements change from time to time, but the cost of changing the FPGA design is negligible compared to ASCI's huge expense. 2.4 Stability Software tools provide the programming environment, and FPGA circuits are the real "hard" implementation of programming. Processor-based systems often contain multiple layers of abstraction that can schedule tasks and share resources among multiple processes. The driver layer controls hardware resources, while the operating system manages memory and processor bandwidth. For any given processor core, only one instruction can be executed at a time, and processor-based systems face the risk of tightly time-bound tasks taking over each other at all times. FPGAs, on the other hand, do not use an operating system, and have true parallel execution and deterministic hardware that focuses on each task, reducing the chance of stability issues. 2.5 Long-Term Maintenance As mentioned above, FPGA chips are field-upgradable without the time and expense involved in redesigning ASICs. For example, digital communication protocols contain specifications that can change over time, and ASIC-based interfaces can create maintenance and forward compatibility difficulties. Reconfigurable FPGA chips can accommodate future modifications. As a product or system matures, users can enhance functionality without spending time redesigning hardware or modifying board layouts.   Ⅲ New Applications of FPGA At present, the FPGAs mainly produced by Xilinx and Altera with the highest market share, which are all based on SRAM technology, and need to be connected to an external memory to save the program when in use. When powered on, the FPGA reads the data in the external memory into the on-chip RAM, and after completing the configuration, it enters the working state. When power off, the FPGA returns to a white chip, and the internal logic disappears. In this way, the FPGA can not only be used repeatedly, but also does not require a special programmer, but only a general EPROM and PROM programmer. So Actel, QuickLogic and other companies also provide FPGAs with anti-fuse technology, which can only be downloaded once. They have the advantages of anti-radiation, high & low temperature resistance, low power consumption and fast speed. They are widely used in military and aerospace fields. FPGA cannot be erased and written repeatedly, which is troublesome and expensive in the early stage of development. Lattice is the inventor of ISP technology, which has certain characteristics in small-scale PLD applications. Early Xilinx products generally did not involve military and aerospace markets, but now a number of products such as Q Pro-R have entered such fields.In the industrial field, FPGA chips are widely used in the industrial field, and are widely used in video processing, image processing, CNC machine tools and other fields to realize signal control and operation acceleration functions. With the development of intelligence and automation technology, the industrial field is gradually shifting from human resources as the core element to intelligent unmanned factories with automation as the core element.Smart electric vehicles will be the mainstream development direction of the automotive industry in the future. At present, the application of FPGA in automotive cameras and sensors is relatively mature. In the artificial intelligence system of automatic/intelligent driving vehicles, the applicability of FPGA will be the most suitable for processing sophisticated ADAS and autonomous driving. Figure 7. FPGA for Auto In the field of automotive electronic system interface and control, FPGA chips are used to control and drive electric vehicle motor control systems, connect various in-vehicle equipment such as driving systems, instrument panels, radar, ultrasonic sensors, etc. control. In the field of video bridging and fusion, FPGA chips can be used to realize functions such as signal bridging of multiple image sensors, 3D surround view video fusion, reversing auxiliary video, and assisted driving video.In the field of communication, the number of 5G base stations has increased, and the FPGA usage of a single base station has increased, driving the increase in FPGA demand. According to estimates, the FPGA consumption of a 5G single base station is expected to increase from 1-3 blocks in the 4G period to 4-5 blocks in the 5G period. Figure 8. RFSoC FPGA Board Target 5G eFPGA technology is superior to traditional FPGA solutions in terms of performance, cost, power consumption, profitability, etc., and can provide flexible solutions for different application scenarios and different market segments. The economic trend of increasing design complexity and falling equipment costs has stimulated the market demand for eFPGA technology.   Ⅳ Development Trend of FPGA First of all, with the commercialization of the new generation of communication technology, the demand for products such as communication base stations, servers, and intelligent terminals will further expand, thereby driving the increase in the market demand for FPGA chips. At the same time, smart cities, smart factories, and consumer electronics pay more attention to the functionality of various smart IoT devices, which will drive the wide application of FPGA chips in smart IoT devices. With the development of the Internet of Vehicles technology, the scale of the use of FPGA chips in the automotive industry will increase day by day to build a more complete Internet of Vehicles and realize smarter autonomous driving functions. Therefore, with the rapid penetration of 5G, the vigorous development of AI and the increasing trend of automotive intelligence, it is expected that the demand for FPGAs in the three fields of communication, AI and automotive electronics will continue to increase in the future, which will also promote The FPGA industry continues to grow.   Ⅴ FAQ 1. What is FPGA and why it is used?The acronym FPGA stands for Field Programmable Gate Array. It is an integrated circuit that can be programmed by a user for a specific use after it has been manufactured. ... These blocks create a physical array of logic gates that can be customized to perform specific computing tasks. 2. Is FPGA faster than GPU?The difference between GPU and FPGA performance is not a static factor, but it does depend on the size of the data set. A study by Sanaullah and Herbordt [7] revealed that FPGA can compute small samples of 3D FFT tens of times faster than GPU. The difference is less clear when the data set gets bigger. 3. Is FPGA faster than CPU?A FPGA can hit the data cell faster and more often than a CPU can do it meaning the FPGA causes more results to occur during an attack. It all goes faster when an FPGA is used. And as a side benefit, no trace of all this is left on the CPU because it's never touched when an FPGA is used. 4. Are FPGAs efficient?Efficiency and Power: FPGAs are well-known for their power efficiency. A research project done by Microsoft on an image classification project showed that Arria 10 FPGA performs almost 10 times better in power consumption. 5. Is FPGA programming hard?FPGA vendors have touted their wares as ideal replacements for DSPs, CPUs, and GPUs – even for all of them in a single device – but they are notoriously difficult for software engineers to program as they are not anything like a conventional processor. 6. What can you do with FPGAs?Uses for FPGAs cover a wide range of areas—from equipment for video and imaging, to circuitry for computer, auto, aerospace, and military applications, in addition to electronics for specialized processing and more. 7. What is the difference between processor and FPGA?Microprocessor vs FPGA: A microprocessor is a simplified CPU or Central Processing Unit. ... An FPGA doesn't have any hardwired logic blocks because that would defeat the field programmable aspect of it. An FPGA is laid out like a net with each junction containing a switch that the user can make or break. 8. What language is used to program FPGA?VerilogTraditionally, FPGAs are programmed using pro-level hardware-description languages such as Verilog or VHDL. 9. How many times can you program an FPGA?There is effectively no limit to the number of times a device can be reconfigured; the configuration is stored in SRAM, which has no write limit. most Fpgas can be passively loaded from a processor, one word at a time. That processor can get the FPGA image from anywhere. 10. What are the advantages of FPGA?FPGA advantagesLong-term availabilityUpdating and adaptation at the customerVery short time-to-marketFast and efficient systemsAcceleration of softwareReal-time applicationsMassively parallel data processing 11. How do you make an FPGA?FPGA design checklistMake sure you have plenty of time to spare.Find a decent computer.If you can afford it, add a big display.Decide which operating system to use.Consider using a virtual machine (VM).Select an FPGA vendor.Pick out a suitable development board.Select an embedded processor to use. 12. What is FPGA for beginners?FPGA stands for Field Programmable Gate Array. As you may already know, FPGA essentially is a huge array of gates that can be programmed and reconfigured any time anywhere. Huge array of gates is an oversimplified description of FPGA. FPGA is indeed much more complex than a simple array of gates. 13. What is FPGA in Verilog?FPGAs are nothing, but reconfigurable logic blocks and interconnects can be programmed by Hardware Description Language like Verilog/ VHDL to perform a specific functionality. 14. Do we need to program the FPGA once powered off?If you have a SRAM-based FPGA, like the Spartan 3, then you have to program it each time it is powered up. The reason for this is that the SRAM which stores the configuration is volatile and loses the programmed configuration after power is switched off. 15. How is FPGA different from microcontroller?One of the main differences between a microcontroller and an FPGA is that an FPGA doesn't have a fixed hardware structure, while a microcontroller does. While FPGAs include fixed logic cells, these, along with the interconnects, can be programmed in parallel by using HDL coding language.
Ivy On 2022-01-26   1312
Power

Grounding Analysis in Electricity with Circuit Diagrams

Introduction The introduction of grounding technology was originally a protective way to prevent electrical or electronic equipment from being struck by lightning. At the same time, it is also an effective means to protect personal safety. When the phase line (such as poor wire insulation, aging, etc.)  touches the equipment shell for some reason, dangerous voltage will be generated on the equipment shell, thus the generated fault current will flow through the PE line to the ground, thus playing a protective role. With the development of electronic communication and other digital fields, only considering lightning protection and safety in the grounding system is far from meeting the requirements. Electrical Grounding Explained | Basic Concepts Catalog Introduction Ⅰ Basic: Q&A Related to Electrical Ground Ⅱ DC Power Supply Ground 2.1 Basic Overview 2.2 DC Power Supply Ground Analysis with Diagrams 2.3 Ground Bounce for Buck Converters 2.4 Ground Bounce for Boost Converters 2.5 Summery Ⅲ Useful Concepts for Grounding Analysis Ⅳ Conclusion Ⅴ FAQ Ⅰ Basic: Q&A Related to Electrical Ground The signal between each device needs a "ground" as the reference ground of the signal. Moreover, with the complexity of electronic equipment, the signal frequency is getting complicated. Therefore, in the grounding design, special attention must be paid to electromagnetic compatibility issues such as mutual interference between signals. Otherwise, improper grounding will seriously affect the reliability of system operation. Here the following are doubts that may arise in the power grounding. Q1: What is the definition of grounding?A: As for grounding concepts, to line engineers, the term usually means "reference point for line voltage". For system designers, it is often a cabinet or rack. For electrical engineers, it means green safety ground or connection to the earth. A more general definition is "A ground is a low impedance path for current to return to its source", and the key points are "low impedance" and "passage". Q2: What are the common grounding symbols in circuit?A: PE, PGND, FG-protective ground or chassisBGND or DC-RETURN-DC-48V (+24V) power supply (battery) returnGND: working groundDGND: digital groundAGND: analog groundLGND: lightning protection ground Q3: What is the appropriate grounding method?A: There are many ways to ground, including single-point grounding, multi-point grounding and mixed types of grounding. Among them, the single is divided into series single-point grounding and parallel single-point grounding. Generally speaking, single-point grounding is used for simple circuits, while grounding distinction between different functional modules, and multi-point grounding or multi-layer boards (complete ground plane layer) are used in low-frequency (f10MHz) circuits. Q4: Why should the analog ground and digital ground be separated?A: Both the analog signal and the digital signal return to the ground, the digital signal changes fast with large noise, while the analog signal needs a clean ground reference to work. If the analog and digital grounds are mixed, noise can affect the analog signal.According to the above mentioned, the analog ground and the digital ground should be processed separately, and then connected together through thin wires, or together at a single point. The general idea is to try to block the noise on the digital ground from flowing to the analog ground. Of course, this is not a very strict requirement that they must be separated, because it depends on the actual situation. Q5: How to ground the signal on the board?A: Under normal circumstances, it is best to use the nearest ground when designing, and after a complete multi-layer board design, it is very easy to ground common signals. The basic principle is to ensure the continuity of the traces and reduce number of vias, close to ground plane or power plane, etc. Q6: How to ground the interface devices of the board?A: Some single boards have external input and output interfaces, such as serial port connectors, network port connectors, etc, if they are not properly grounded, it will also affect normal work, such as network port interconnection errors, packet loss, etc., and will become an external source of electromagnetic interference, sending the noise inside the board to the outside. Generally speaking, an independent interface ground will be divided, and the connection with the signal ground will be connected by thin traces, and a o small resistance or 0ohm resistor can be connected in series. Thin traces can be used to block signal ground noise from passing to the interface ground. Similarly, the filtering of interface ground and interface power should also be carefully considered. Q7: How to ground the shielding layer in the cable with shielding layer?A: The layer of the shielded cable must be connected to the interface ground of the single board, not the signal ground. This is because there are various noises on the signal ground. If the shielding layer is connected to the signal ground, the noise voltage will drive the common mode current along the shielding. Therefore, cables with unreasonable design are generally the largest noise output source of electromagnetic interference.   Ⅱ DC Power Supply Ground 2.1 Basic Overview In power supply design, safety is often in the first place, and the same is true in switching power supplies. Grounding can protect the personal safety of users and ensure the normal operation of power equipment. So what is the appropriate grounding method in switching power supplies? What are the common ground symbols in circuits? This article will popularize the grounding basic in DC power supplies.DC-DC is a commonly used power supply circuit in electronic hardware design. It has high efficiency in realizing high input voltage and low output voltage. It is widely used, from power adapters, mobile phone chargers, and internal power conversion of electronic equipment to DC-DC circuits. Each semiconductor manufacturer has its own DC-DC chips, and also there are many optional chips. For a well-designed DC-DC circuit, not only the peripheral resistance, capacitance, but also the inductance parameters of the DC-DC circuit should be considered. There are also high requirements for the PCB layout design. This paper proposes a method to guide the grounding in the PCB layout from the perspective of the current flow in DC circuits. 2.2 DC Power Supply Ground Analysis with Diagrams Circuit grounding looks simple in a circuit schematic, but the actual characteristics of a circuit are determined by the layout of its PCB. And the analysis of the grounding point is very difficult, especially for the DC-DC converter circuit, the grounding point of the circuit will gather a large current that changes rapidly. When grounded nodes move, system performance suffers and the system radiates EMI. Here a good understanding of the physical nature of "ground" induced ground noise can provide an intuitive understanding of ground noise reduction problems.The change of the transmission current in the ground loop will generate a magnetic field in the loop. The magnetic field strength is proportional to the current, and the magnetic flux is proportional to the product of the loop area and the magnetic field strength, which is expressed by the formula: Figure 1. Right Hand Rule Suppose there is a sudden break in the current loop, as shown in Figure 2. When the switch is turned off, the magnetic flux disappears, which will generate a large transient voltage along the wire. If part of the wire is a grounding return pin, the voltage referenced to the ground level will have a spike, resulting in a false signal in any circuit that uses that pin as a ground reference. Figure 2. Function of Start Switch The traces on the PCB circuit board are not ideal wires and have resistance. 1 ounce (oz) copper has a resistance of 500 microohms/square, so a 1 amp change in current will only produce a bounce voltage of 500uV/square -- the problem only exists if you use long thin traces or daisy chain grounds or Precision electronic circuits.The best way to reduce ground bounce in a DC-DC switching circuit is to control the magnetic flux variation—minimizing current loop area and loop area variation. The principle of DC-DC circuit buck or boost is to use electronic switches to quickly switch to charge and discharge the energy storage element to achieve voltage conversion, and at the same time change the loop area of the current in the circuit, resulting in ground bounce and electromagnetic radiation.In some cases, as shown in Figure, the current remains constant, while the switching causes a change in the loop area and therefore a change in the magnetic flux. In switching state 1, an ideal voltage source is connected to an ideal current source through an ideal conductor. In addition, current flows in a loop that includes a ground return.In switch state 2, the same current flows in different paths when the switch changes position. The current source is DC and there is no change, but the loop area has changed. A change in the loop area means a change in the magnetic flux, so a voltage is generated. Because the ground loop is part of the change loop. Figure 3. Figure Loop Area In the case of switching changes, the loop area changes. Everywhere along the wire in the lower left, when the current I1 becomes 0, a voltage is generated where the magnetic field disappears. 2.3 Ground Bounce for Buck Converters The buck converter (step-down converter) circuit is very similar to the circuit structure in Figure 3 above, and the circuit of the step-down converter is simplified, as shown in Figure. Figure 4. Step-down Converter Circuit At high frequencies, a large capacitor such as the input capacitor Cin of the step-down converter can be regarded as a DC voltage source. Similarly, an inductor such as the output inductor LBuck can be regarded as a DC current source. These approximations help to visualize understanding and theoretical analysis.As shown in Figure 5, when the switch alternates between the two positions, the change in the path through which the current flows causes a change in the magnetic flux. The large inductor LBuck keeps the output current approximately constant. Similarly, the large capacitor Cin holds the voltage approximately equal to Vin. Since the voltage across the input lead inductance does not change, the input current also remains approximately constant. Figure 5. Effect of Switch on Loop Area Although the input current and output voltage are essentially constant, when the switch is switched from position 1 to position 2, the total loop area rapidly changes by half. Loop area changes imply rapid changes in magnetic flux, causing ground bounce along the loop circuit.In practice, a buck converter consists of a pair of semiconductor electronic switches, as shown in Figure 6. Although the complex procedure increases in each figure, the analysis method for ground bounce caused by changes in magnetic flux remains simple and intuitive. Figure 6. Magnetic Flux Changes Cause Ground Bounce The fact that changes in magnetic flux create voltages along the ground loop raises an interesting question: where is the real ground? Because ground bounce means that, to some ideal point called ground (that point needs to be defined), a bounce voltage is created on the ground return trace. In a power regulator circuit, the real ground should be connected to the low-voltage side of the load. After all, the purpose of a DC-DC converter is to provide a stable voltage and current to the load. All other points on the current loop are not true ground, but the part of ground loop.Since the low-voltage end of the load is grounded and the change in the loop area is the cause of the ground bounce, then reducing the ground bounce and electromagnetic radiation, and optimizing the grounding of the circuit are to minimize the current loop area in the DC-DC circuit. Here is a way to optimize the layout. For example, the location of the input capacitor, output capacitor, and energy storage inductor reduces the current loop area. Figure shows how to carefully place the input capacitor Cin to reduce the loop area and ground bounce. Figure 7. Reduce Ground Bounce Capacitor Cin in Figure bypasses the high-side switch on the top layer of the PCB directly to both ends of the bottom low-side switch, thereby reducing the variation in loop area and isolating it from the ground return. When the switch switches from one state to another, from the bottom of Vin to the bottom of the load, there is no loop area change or switch current change. Therefore no ground bounce occurs in the ground loop.Figure is an unreasonable PCB layout. When the high-side switch is turned on, the DC current flows along the red loop of the outer ring. When the low-side switch is turned on, the DC current flows along the blue loop. It can be seen that this circuit layout produces a large loop change when the switch changes, causing a change in the magnetic flux, resulting in ground bounce and electromagnetic radiation interference. Figure 8. Unreasonable Layout For the clarity, in single-layer PCB routing, even using a second-layer monolithic ground plane cannot solve the bounce caused by grounding. Figure 9 is a simple box to illustrate that the ground plane cannot solve the problem. Here we use a double layer PCB to add a bypass circuit at the top level power line vertical. Figure 9. Ground Floor In the Figure 9 (a), the ground plane is monolithic and uncut. The top layer print current flows through the capacitor, through the via, and to the ground plane. Because AC always flows along the path of least impedance, ground return current returns to the power source around the corners of its path. So when the amplitude or frequency of the current changes, the magnetic field of the current and its loop area change, thereby changing the magnetic flux. The regularity of current flow along the path of least impedance means that ground bounce can occur even with a monolithic ground plane - independent of its conduction.In the Figure 9 (b), a properly cut ground plane limits the return current to minimize loop area, thus greatly reducing ground bounce. Any residual ground bounce voltage developed within the cut return line is isolated from the common ground plane.The PCB layout in Figure 10 uses a double-layer PCB to mount the input capacitor and two switches on islands in the ground plane. This wiring doesn't have to be the best, but it works well and speaks to key points. It should be noted that the loop area surrounded by the red and blue currents is large, but the difference between the two loop areas is small. A small change in loop area means a small change in magnetic flux—small ground bounce. However, in general, keep the loop area small. Figure 10. is just to illustrate the importance of AC current path matching. Figure 10. Converter Layout   Additionally, ground bounce along any ground loop is limited by ground cutting within ground loop islands where magnetic fields and loop areas vary. Also, it may appear at first glance that the input capacitance Cin is not located between the top-level high-side switch and the lower-level low-side switch shown in Figure 10. Although physical proximity can be fine, what really works is the electronic proximity achieved by minimizing the loop area. 2.4 Ground Bounce for Boost Converters A boost converter (step-down converter) is actually a reflection of a buck converter, as shown in Figure 11, where the output capacitor must be placed between the top high-side switch and the bottom low-side switch to minimize loop area change. Figure 11. Changes in Loop Area In the same way that a buck converter places Cvin at a critical position, a boost converter places Cvout at a key position. 2.5 Summery The ground bounce voltage is mainly due to changes in the magnetic flux. In a DC-DC switching power supply, the magnetic flux variation is caused by switching the DC current at high speed between different current loop areas. But careful placement of the buck converter's input capacitors and the boost converter's output capacitors, and a good cut of the ground plane can isolate ground bounce. Pay attention to, it is important to be careful when cutting the ground plane to avoid increasing the loop area for other return currents in the circuit.Another reasonable layout should place the real ground on the bottom layer connecting the load, which will not cause changes in loop area or current. Any other point related to conduction can be called "ground", but it's just a point along the return path.   Ⅲ Useful Concepts for Grounding Analysis If you follow the basic concepts, you will have a clear idea of what will cause ground bounce. Figure 12. shows that two conductors that are perpendicular to each other are not subject to the mutual influence of the magnetic field. Figure 12. Two Conductors Perpendicular to Each Other   The magnetic field lines created around two parallel wires carrying equal currents in the same direction traditionally cancel each other out between the two wires, so the total energy stored by the two wires is less than the energy stored by one wire alone. Therefore, the inductance of PCB wide traces is smaller than that of narrow traces. Figure 13. Two Parallel Wires with Current Flowing in Same Directions   The magnetic field lines generated around two equal conductors carrying equal currents in opposite directions cancel each other out of the two conductors, and strengthen between the two conductors. If the inner loop area is reduced, so does 4the total magnetic flux. This phenomenon can explain why the return current of the AC ground plane always flows under the trace conductors on the top layer of the bath. Figure 14. Two Parallel Wires with Current Flowing in Opposite Directions Figure 15. shows why corners add inductance. A straight wire only sees its own magnetic field, but at the corners, the magnetic field of a vertical wire is also visible. Therefore, the corners store more magnetic field energy, and their inductance is greater than that of straight wires. Figure 15. Add Inductance at the Corners Figure 16. shows that cutting the ground plane under the transmission line conductor increases the loop area by diverting the loop current, thereby increasing the loop size and contributing to ground bounce. Figure 16. Return Current Flows Along the Path of Least Impedance   Figure 17. Effect of Component Orientation   Ⅳ Conclusion Ground bounce has always been a potential problem. For monitors or TVs, it means the image is noisy, for audio equipment it means the noise floor. In digital systems, ground bounce can cause calculation errors -or even system crashes. Careful estimation of parasitic elements and simulation are effective methods for predicting the magnitude of ground bounce.First, when designing the PCB, the low-voltage side of the load should be set to true ground. Then, replace the large inductors and capacitors with current and voltage sources to simplify the circuit dynamics. Observing the current loop under each switch combination, the loops should be made to overlap, and if this is not possible, an island should be carefully cut out in the ground plane to ensure that only islands of DC inflow and outflow are present.In most cases, good grounding performance can be obtained with these efforts. If that doesn't work, the resistance of the ground plane should be considered first, then the displacement currents flowing across all switches and parasitic capacitors entering the return path. In short, no matter what circuit, the principle is the same, that is, to reduce the loop area and its difference when the switch changes.   Ⅴ FAQ 1. Does power supply need to be grounded?While it will likely be fine (I've run many computers in old houses that had no grounding), it's not advised. A static charge will build up, and depending on where it discharges may cause damage to the electronics. 2. What is the purpose of a ground wire?The ground wire offers an additional path for the electrical circuit to flow into the earth so as to not endanger anyone working with the electricity nearby in the event of a short circuit. Without ground wire, your body could instead complete the ground path and may cause shock or electrocution. 3. Which wire is ground on power supply?In a DC circuit, the convention in most of the world is that black is the “ground” and any other color carries a signal or power rail of some sort, with red and yellow being popular for power wiring, but it can really be any color on any particular connector. For example, for a typical PC “ATX” power supply. 4. What is the purpose of a ground?Grounding gives electricity the most effective way to return to the ground via your electrical panel. A grounding wire gives an appliance or electrical device a safe way to discharge excess electricity. 5. Should you ground the negative of a DC power supply?As long as both the negative terminal of the LED and the negative terminal of the battery both have good enough connections to ground then the ground will carry enough current between the two connection to complete the circuit and light the LED. The same applies in the mains electricity supply. 6. How do I know if my power supply is grounded?Insert one probe of the circuit tester into the small slot and the other probe into the large probe. If the circuit tester lights up, you have power to the outlet. Now place one probe in the small slot and the other probe into the "U" shaped ground hole. The indicator should light up if the outlet is grounded. 7. Can you ground yourself by touching PSU?It looks pretty, but it's impossible to ground yourself to a case that has no bare metal. Instead, I just installed my power supply and touched the ground prong every now and then. All that said, if all you're doing is touching a metal part on the computer, you aren't really grounding yourself. 8. Can I tie the neutral and ground together?No, the neutral and ground should never be wired together. This is wrong, and potentially dangerous. When you plug in something in the outlet, the neutral will be live, as it closes the circuit. If the ground is wired to the neutral, the ground of the applicance will also be live. 9. What is ground in DC circuit?Traditionally, "ground" is the lowest potential in a circuit, e.g. the minus side of a battery or DC supply. 10. What happens when electricity goes to ground?The majority of the energy of the lightning discharge is dissipated in the air as it travels from the clouds to the ground through the air. The remainder is dissipated in the ground in the area surrounding the location of the strike, over a fairly short distance. 11. What is difference between earthing and grounding?Earthing and grounding are similar terms. ... The main difference between earthing and grounding is that the earthing refers that the circuit is physically connected to the ground with Zero Volt Potential. But, grounding refers that the circuit is not physically connected to ground, but still has zero potential. 12. Does a DC power supply need a ground?The answer comes from the NEC section 250.162, referring to the grounding of two-wire DC systems, which includes the 5V and 24V outputs, depending on your case. ... So, the short answer for a 24V DC system is no, the output is not required to be connected to ground. 13. How do you ground a DC power supply?You ground the device by connecting a grounding cable to earth ground and then attaching it to the grounding point on the DC power supply. You must provide the grounding cables. The cable lug used on the grounding cable should have a #10 stud hole and accommodate a minimum of 12-AWG wire.
Ivy On 2022-01-21   890
Resistors

What You Need to Know about the Hot Swap PCB

CatalogIntroductionⅠ What is a Hot Swap PCB?Ⅱ Custom Keyboard - Hotswap vs. Solderable PCB    2.1 Advantages of Hotswap PCB    2.2 Disadvantages of Hotswap PCB    2.3 Advantages of Solderable PCB    2.4 Disadvantages of Solderable PCBⅢ What Is a Hotswap Mechanical Keyboard?Ⅳ Why are so few hotswap keyboards available?Ⅴ How to Make Hot-Swappable Mechanical keyboard PCB?Ⅵ Relevant Information about "Hot Swap PCB"IntroductionWhen building a custom mechanical keyboard, one of the most contentious decisions is whether to use a hotswap PCB or a solderable PCB. Is one superior to the other? This article will go over the specifics of the hot swap PCB.Ⅰ What is a Hot Swap PCB?The need to solder on switches is one of the most intimidating obstacles for people looking to build a mechanical keyboard. Hot swap PCBs, on the other hand, come to the rescue! A printed circuit board, or PCB, is the brain of your keyboard.There are two ways to connect your mechanical switches to the PCB to register inputs.1.SOLDER PCBSoldering necessitates the use of a soldering tool and solder, a low-melting metal alloy. This method entails inserting the pins of a switch through holes in your PCB and then melting the solder to connect the two. This secures the switch and creates a connection between the PCB and the switch's metal pins. When you press the switch, the signal can now transfer, register as an input, and eventually, trigger an action on your computer.Before attempting to complete this process properly, some research is required. You risk burning the solder, destroying the socket on your PCB, or messing up the switch's pins. Soldering may appear intimidating, but observing video tutorials and practicing with other objects will teach you how to do it correctly and safely.2. HOT SWAP PCBThe second, and far more straightforward method, is to install your switches using a hot swap PCB. You push your switch's pins into pre-installed sockets rather than using a soldering tool and solder. Hot swapping is similar to installing PC components  or Legos; you simply plug and play. It is quick, requires no training, and allows you to easily swap out switches.Glorious Modular Mechanical Keyboards (GMMK) all use hot swap PCBs.  making them the ideal choice for those looking for a simple, intuitive, and customizable keyboard experience.When installing switches into a hot-swap PCB, a softer surface to push against is recommended. Lining up your switch with the socket requires precision, so a softer surface reduces the possibility of bent pins. Furthermore, when removing switches, you should be gentle on the board. Ripping out a switch could result in catastrophic harm to the hot-swap socket.Note: A solder PCB  can be converted to a hot-swap PCB, but this still necessitates the use of a soldering tool. Furthermore, it is not a simple procedure that we recommend for beginners. Ⅱ Custom Keyboard  - Hotswap vs. Solderable PCB  When building a custom mechanical keyboard, one of the most contentious decisions is whether to use a hot swap PCB or a solderable PCB. Is one superior to the other?To that end, we will discuss the benefits and drawbacks of the two PCB options. The short answer is that there is no "better" PCB – it all comes down to personal preference, which is what defines the custom keyboard hobby.2.1 Advantages of Hotswap PCB  The most significant advantage of using a hotswap PCB  is the ease of switch installation, making it ideal for beginners. Simply ensure that the two pins of a switch are straight, install it to the PCB, and you're ready to go! You are not required to solder each individual switch to the PCB.Another reason why a hotswap PCB  is ideal for newcomers to the pastime is that it allows them to experiment with different switches in real-time. When you're new to the hobby, it's essential to figure out what kind of switch you like and don't like, and a hotswap PCB  makes this stage of...discovery easier.Aside from that, a hotswap PCB  simplifies keyboard tuning and maintenance. Assume you've been using your keyboard for a couple of years and you need to re-lube your switches – yes, you do need to re-lube your switches after some time.With a hotswap PCB.  you can simply remove the switches from your keyboard without having to desolder them.Tuning your stabilizers with a hotswap PCB is also not as difficult, assuming you use screw-in stabilizers. The issue is that you usually have to completely disassemble your keyboard to get to the screw-in stabilizers. Every component attached to the PCB, including the switches and plate, must be removed.While you may have fine-tuned your stabilizers during assembly, they may begin to tick later on. To be sure, you can inject lube directly into the stabilizer housing to try to solve the problem, but this doesn't always work – in my experience, it usually doesn't.2.2 Disadvantages of Hotswap PCB  You're stuck with only one layout if you use a hotswap PCB right away. Of course, some keyboards, such as the Ikki68 Aurora, provide slightly more layout options, but they still fall short of the sheer flexibility of a solderable PCB in this regard. Furthermore, you cannot use a hotswap PCB for half-plate builds. Because the switches are not as "attached" to the PCB as soldered switches are, using a half plate with a hotswap  PCB is not recommended.A half plate, as the name implies, does not cover the alphas on a keyboard. If you use a hotswap PCB with such a plate, the switches in the alphas portion are basically "suspended" without any support from the plate – this can damage a hotswap PCB,  2.3 Advantages of Solderable PCBAs previously stated, a solderable PCB allows you to design your own layout with almost no restrictions. Do you prefer a longer 7u spacebar over a 6.25u spacebar? That's fine. Would you rather have a split backspace than a full backspace? Done.A half plate with a solderable PCB, on the other hand, will provide a softer typing experience. You are typing directly on the PCB because the alphas portion of a half plate is exposed. You'll get a softer, less harsh typing experience if the PCB has flex cuts – a hotswap PCB doesn't have this kind of flexibility.Aside from that, a solderable PCB is less expensive than a hotswap PCB. The price difference isn't particularly significant – about $10 more in most cases – but it's worth noting. However, that is not the entire picture; I'll discuss this further in the following section.2.4 Disadvantages of Solderable PCBEven though a solderable PCB is less expensive than a hotswap PCB. It requires more tools to assemble, such as a soldering iron and desoldering tools. Depending on whether you already have such items, these do increase the "cost of ownership" of a solderable PCB.Assembling a keyboard with a solderable PCB requires more work because each individual switch must be soldered to the PCB. You may even damage the PCB during the assembly process if you are inexperienced with a soldering iron.The inability to easily swap out switches is, in my opinion, the most significant disadvantage of a solderable PCB. This makes a variety of keyboard maintenance tasks more difficult, such as stabilizer tuning, switch relubrication, and troubleshooting any keyboard problems.That's it. You may prefer a hotswap or solderable PCB depending on your preferences. Personally, I always use a hotswap PCB for ease of installation, even if it means I can only do a single layout or a half plate build.In addition, I review keyboard switches  on a regular basis; having a hotswap PCB makes this process much easier.Ⅲ What Is a Hotswap Mechanical Keyboard  ?Hotswap = changing switches without solderingHotswap (also known as hot-swap or hot swap) is a popular feature that Kono Store and Input Club were early adopters of. It refers to keyboards that allow for switch replacement without the use of solder. Kaihua (Kailh), a leading switch manufacturer in China, developed the market-leading hotswap  socket design shown below.How can that get confusing?Many websites state that hotswap keyboards have "hotswap switches," which is rarely the case and can lead to minor confusion. Cherry MX-style hotswap keyboard switches can be used in keyboards with the same hotswap socket pinout/plate design, but they were not designed for hotswap use. These switches can even be soldered into a conventional keyboard. The true innovation is found on the PCB (Printed Circuit Board) or, in the case of actual hotswap switches such as our contactless SILO / Keystone line, in the underlying technology.Ⅳ Why are so few hotswap keyboards available?The most significant reason is a reduction in profit — both long and short term. Hotswap sockets are slightly more expensive per keyboard. Most mass-market keyboards are generated in batches of several thousand or more, so manufacturers don't like the extra cost eating into their profit. They also make repairs very simple; when switches wear out, people are much less likely to purchase a new keyboard rather than repairing it themselves.Implementing hotswap sockets also necessitates some engineering expertise. They take up extra space on the PCB, requiring precise component placement and routing. This limits international layout support at the PCB level, which is especially important if a keyboard includes LEDs. Separate PCB designs are usually required if you want a European enter key or a split space bar in a hotswap keyboard. By reducing LED functionality, keyboards such as the Minivan, which is no longer accessible, achieve partial all-in-one success.Ⅴ How to Make Hot-Swappable Mechanical keyboard PCB  ?Hot-Swappable Sockets for DIY Mechanical Keyboard  With a hot-swappable mechanical keyboard, you can replace switches and LEDs on the fly without soldering or even turning off the keyboard. In this short video tutorial, I demonstrate how to make any printed circuit board for a mechanical keyboard hot-swappable by including footprints for Cherry MX plate switches. Other manufacturers' switches, such as Gateron and Kaihl, are compatible with the Cherry MX switches, making this a universal solution.Required HardwareSuitable printed circuit board (for example for ANAVI Macro Pad 8 maker kit)Switches made of metal3mm LEDs are optional, depending on the type of PCB and switches.KeycapsTE Connectivity / AMP 8134-HC-8P2 Holtite sockets for mechanical switches and TE Connectivity / AMP 8134-HC-5P2 Holtite sockets for 3mm LEDsTweezers, cutters and soldering irons are required tools.Holtite sockets for hot-swap  Step 1Insert the holtite sockets  into the PCB with tweezers . Because the sockets are small, take care not to lose any of them. Switch on the soldering iron. Warm each socket and push it gently. So we're using a soldering iron, but not for soldering. We're just using its heat to mount the sockets.It appears to be simpler than it is. It took some time for me to do it for all of the switches and LEDs. Each key has two holes for the switch and two holes for the LED, so you'll need four sockets of the appropriate size for each key.Step 2The following step is optional and only applies to the ANAVI Macro Pad 8 . The maker kit includes a WS2812B addressable LED strip that should be soldered to the back of the keyboard's side. Please take note of the arrow indicating the direction of the LED strip and ensure you place it correctly as shown in the video.Step 3Cut the legs of the 3mm LEDs  to ensure a good fit in the hot-swappable holtite sockets we've already installed.Step 4Put the switches, LEDs, and keycaps together. After you've completed step 1, this is a simple process since you already get a hot-swappable printed circuit board  for the mechanical keyboard.ANAVI Macro Pad 8 customized with blue Cherry MX switches and green 3mm LEDs for backlightingThe Gateron red switches, red LEDs, and white translucent keycaps that come standard with the ANAVI Macro Pad 8 are standard. In this case, however, I'm experimenting with blue Cherry MX switches, green LEDs, and dark translucent keycaps in the hot-swappable version. I bought a variety of mechanical switches, including Gateron Red, Cherry MX Blue , and Cherry MX Brown. Please keep in mind that the 3mm LED slots on the Cherry MX brown switches in the video are not present.The same method of using holtite sockets can be used on any other mechanical keyboard PCB  with a footprint for Cherry MX switches.Ⅵ Relevant Information about "Hot Swap PCB"1. Are hot-swappable PCBS good?If you're new to mechanical keyboards and not looking to learn how to solder, we recommend a PCB with hot-swap sockets as they are the most beginner friendly.2. Are solder switches hard?Soldering isn't difficult, especially with good tools, but it's still a skill which must be learned and it just doesn't make sense to risk a prized keyboard while you're learning. There are many posts here from folks who have damaged a keyboard with their first soldering attempt and looking for advice on how to fix it.3. What does a soldered PCB mean?PCB soldering is another term for the process of soldering electrical circuit boards. ... As the soldering iron melts this metal, it is then used a bit like glue to stick to pieces together. As the solder metal cools, it will re-harden into one large shape that connects the two parts.4. Can you put 3 pin switches in a 5 pin PCB?There are holes for 5-pin (PCB mount) switches, but 3-pin switches work just fine here since the plate is fastened to the PCB - alignment and stability won't be an issue. This PCB uses good quality Kailh hotswap sockets.5. Does PCB affect sound keyboard?Re: How does the PCB affect the sound of the keyboard? PCB will have minimal effect, despite being connected, it's a soft material and the plate tends to take the actual impact regardless of mount. The plate will change the sound of the ping, but more importantly it can and usually does amplify it.6. What temperature should I solder PCB?600°- 650°F (316°- 343°C) is a good place to start for lead-based solder and 650°- 700°F (343°- 371°C) for lead-free solder. You want the tip hot enough to melt the solder efficiency, but excess heat can damage components as the heat travels along the leads, and it will reduce the lifespan of the soldering tip.7. What are types of PCB?Common Types of Printed Circuit BoardsSingle Layer PCB. Single layer printed circuit boards are among some of the simplest to design and manufacture. ...Double Layer PCB. ...Multi-Layer PCB. ...High Density Interconnect (HDI) PCB. ...High Frequency PCB.8. Is Ducky hot-swappable?All standard Ducky One 3 mechanical keyboards are hot-swappable and feature Kailh's hot-swap sockets. Colored in a vibrant yellow, Kailh sockets are chosen for their impressive reliability.9. Do hot swap keyboards need soldering?All you need to do is just ensure that the two pins of a switch are straight, install it to the PCB, and…you're good to go! You don't have to go through the trouble of soldering each individual switch to the PCB. ... Other than that, a hotswap PCB makes keyboard tuning and maintenance much, much easier as well. 
kynix On 2022-01-18   5797

Kynix

Kynix was founded in 2008, specializing in the electronic components distribution business. We adhere to honesty and ethics as our business philosophy and have gradually established an excellent reputation and credibility in our international business. With the accurate quotation, excellent credit, reasonable price, reliable quality, fast delivery, and authentic service, we have won the praise of the majority of customers.

Follow us

Join our mailing list!

Be the first to know about new products, special offers, and more.

Kynix

  • How to purchase

  • Order
  • Search & Inquiry
  • Shipping & Tracking
  • Payment Methods
  • Contact Us

  • Tel: 00852-6915 1330
  • Email: info@kynix.com
  • Follow Us

authentication

Kynix

© 2008-2026 kynix.com all rights reserve.