The Kynix Components

CatalogProduct OverviewTUSB4041IPAPQ1 Related Video IntroductionTUSB4041IPAPQ1 CAD ModelsTUSB4041IPAPQ1 Pin ConfigurationTUSB4041IPAPQ1 Block DiagramTUSB4041IPAPQ1 FeaturesTUSB4041IPAPQ1 ApplicationsTUSB4041IPAPQ1 DatasheetTUSB4041IPAPQ1 SpecificationsTUSB4041IPAPQ1 ManufacturerUsing WarningTUSB4041IPAPQ1 FAQ Product OverviewThe TUSB4041I-Q1 device is a four-port USB 2.0 hub. The device provides USB high-speed or fulls peed connections on the upstream port. The device also provides USB high-speed, full-speed, or low speed connections on the downstream ports. When the upstream port is connected to an electrical environment that only supports high-speed, full speed, and low-speed connections, the USB highspeed, full-speed and low-speed connectivity is enabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed or low speed connections, the USB high-speed connectivity are disabled on the downstream ports. The TUSB4041I-Q1 device supports per-port or ganged power switching and over current protection. The device also supports battery charging applications. An individually port-power-controlled hub switches power on or off to each downstream port as requested by the USB host. Also when an individually port-power-controlled hub senses an overcurrent event, only power to the affected downstream port is switched off. A ganged hub switches on power to all of the downstream ports when power is required to be on for any port. The power to the downstream ports is not switched off unless all ports are in a state that allows power to be removed. Also, when a ganged hub senses an over current event, power to all downstream ports are switched off. The TUSB4041I-Q1 device downstream ports provide support for battery charging applications by providing USB battery charging downstream-port (CDP) handshaking support. The device also supports a dedicated charging port (DCP) mode when the upstream port is not connected. The DCP mode is compliant with the USB battery charging specification and Chinese Telecommunications Industry Standard YD/T 1591-2009. Also, an automatic mode provides transparent support for BC devices and devices supporting divider-mode charging solutions when the upstream port unconnected. The TUSB4041I-Q1 device provides pin-strap configuration for some features including battery charging support, and also provides customization though OTP ROM, I2C EEPROM, or through an I2C and SMBus slave interface for PID, VID, and custom port and phy configurations. Custom string support is also available when using an I2C EEPROM or the I2C and SMBus slave interface. The device is available in a 64-pin PAP package and is offered in a industrial version for operation over the temperature range of –40°C to 85°C. TUSB4041IPAPQ1 Related Video IntroductionTUSB4041IPAPQ1 Video Description: So today I discuss what USB hub you should buy... There's powered and unpowered, USB 2.0 and USB 3.0... Hopefully it helps you to decide which one you need! TUSB4041IPAPQ1 CAD ModelsFigure: TUSB4041IPAPQ1 PCB Symbol   Figure: TUSB4041IPAPQ1 Footprint   Figure: TUSB4041IPAPQ1 3D Models TUSB4041IPAPQ1 Pin ConfigurationFigure: TUSB4041IPAPQ1 Pin Configuration TUSB4041IPAPQ1 Functional Block DiagramFigure: TUSB4041IPAPQ1 Functional Block Diagram TUSB4041IPAPQ1 FeaturesQualified for Automotive ApplicationsAEC-Q100 Qualified With the Following Results– Device Temperature Grade 3: –40°C to 85°C Ambient Operating Temperature– Device HBM ESD Classification Level 2– Device CDM ESD Classification Level C5Four Port USB 2.0 HubUSB 2.0 Hub Features– Multi Transaction Translator (MTT) Hub: Four Transaction Translators– Four Asynchronous Endpoint Buffers per Transaction TranslatorSupports USB Battery Charging– CDP Mode (Upstream Port Connected)– DCP Mode (Upstream Port Unconnected)– DCP Mode Complies With Chinese Telecommunications Industry Standard YD/T 1591-2009– Supports D+ and D– Divider ModePer Port or Ganged Power Switching andOvercurrent Notification InputsOTP ROM, Serial EEPROM or I2C and SMBusSlave Interface for Custom Configurations:– VID and PID– Customizable Ports– Manufacturer and Product Strings (not by OTP ROM)– Serial Number (not by OTP ROM)Application Feature Selection Using Pin Selectionor EEPROM, I2C, or SMBus Slave InterfaceProvides 128-Bit Universally Unique Identifier(UUID)Supports On-Board and In-System OTP andEEPROMProgramming Through the USB 2.0 Upstream PortSingle Clock Input, 24-MHz Crystal or OscillatorDM/DP Polarity SwapType C CompatibleNo Special Driver Requirements; Works TUSB4041IPAPQ1 ApplicationsAutomotiveComputer SystemsDocking StationsMonitorsSet-Top Boxes TUSB4041IPAPQ1 DatasheetYou can download the datasheet from the link given below:TUSB4041IPAPQ1 Datasheet TUSB4041IPAPQ1 SpecificationsProduct AttributeAttribute ValueManufacturer:Texas InstrumentsProduct Category:USB Interface ICSeries:TUSB4041I-Q1Product:USB HubsType:Hub ControllerMounting Style:SMD/SMTPackage / Case:HTQFP-64Standard:USB 2.0Speed:High Speed (HS)Data Rate:480 Mb/sSupply Voltage - Min:990 uVSupply Voltage - Max:3.6 VOperating Supply Current:15 uAOperating Temperature:-40°C ~ 85°CQualification:AEC-Q100Packaging:TrayBrand:Texas InstrumentsInterface Type:I2C/SMBusMoisture Sensitive:YesNumber of Ports:4 PortOperating Supply Voltage:1.1 V, 3.3 VProduct Type:USB Interface ICSubcategory:Interface ICsUnit Weight:0.017506 oz TUSB4041IPAPQ1 ManufacturerTexas Instruments Incorporated (TI) is an American technology company headquartered in Dallas, Texas, that designs and manufactures semiconductors and various integrated circuits, which it sells to electronics designers and manufacturers globally. It is one of the top 10 semiconductor companies worldwide based on sales volume.The company's focus is on developing analog chips and embedded processors, which account for more than 80% of its revenue. TI also produces TI digital light processing technology and education technology products including calculators, microcontrollers and multi-core processors. The company holds 45,000 patents worldwide as of 2016. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. TUSB4041IPAPQ1 FAQWhat is a USB Hub?A USB hub is a device that expands a single Universal Serial Bus (USB) port into several so that there are more ports available to connect devices to a host system, similar to a power strip. USB hubs are often built into equipment such as computer cases, keyboards, monitors, or printers. What are USB hubs Good For?USB hubs are typically used to extend USB sockets to the top of the desk to conveniently plug in USB drives, cameras and portable storage drives. Self-powered hubs derive their power from a wall outlet and usually provide up to 500 milliamps (mA) at each port. What is the difference between a USB port and a USB hub?The USB port provides a connection from the port to whatever the other end of the connection is linked to, such as a computer. An USB hub, on the other hand, is a device that provides many USB connections, meaning that it actually contains USB ports within itself. 

CatalogProduct OverviewTLC274CD Related Video IntroductionTLC274CD CAD ModelsTLC274CD Pin ConfigurationTLC274CD Equivalent SchematicTLC274CD FeaturesTLC274CD Application InformationTLC274CD DatasheetTLC274CD SpecificationsTLC274CD ManufacturerUsing WarningTLC274CD FAQ Product OverviewThe TLC274 and TLC279 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices. These devices use  Texas Instruments silicongate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes. The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for BiFET and NFET products. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC274 (10 mV) to the highprecision TLC279 (900 µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs. In general, many features associated with bipolar technology are available on LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC274 and TLC279. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail. A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications. The device inputs and outputs are designed to withstand −100-mA surge currents without sustaining latch-up. The TLC274 and TLC279 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance. The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from −40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of −55°C to 125°C. TLC274CD Related Video IntroductionTLC274CD Video Description: In this video, Karen presents and introduction of op-amps how various ways they can be used in circuits. At a basic level, op-amps are quite simple. They compare the voltages at their two outputs and use the difference in voltages to determine how the signal is amplified. The differential voltage at the inputs often needs to only be a few microvolts to generate an amplified signal. To be able to finely control the gain, a feedback loop must be created between the op amp’s output and one of the inputs. This loop usually contains a resistor and/or capacitor to have finer control of the gain. TLC274CD CAD ModelsFigure: TLC274CD PCB Symbol   Figure: TLC274CD Footprint   Figure: TLC274CD 3D Models TLC274CD Pin ConfigurationFigure: TLC274CD Pin Configuration TLC274CD Equivalent SchematicFigure: TLC274CD Equivalent Schematic TLC274CD FeaturesTrimmed Offset Voltage:TLC279 . . . 900 µV Max at 25°C, VDD = 5 VInput Offset Voltage Drift ...Typically1 µV/Month, Including the First 30 DaysWide Range of Supply Voltages OverSpecified Temperature Range:0°C to 70°C . . . 3 V to 16 V−40°C to 85°C . . . 4 V to 16 V−55°C to 125°C . . . 4 V to 16 VSingle-Supply OperationCommon-Mode Input Voltage RangeExtends Below the Negative Rail (C-Suffix and I-Suffix Versions)Low Noise ...Typically 25 nV/√Hzat f = 1 kHz Output Voltage Range Includes NegativeRailHigh Input Impedance . . . 1012 Ω TypESD-Protection CircuitrySmall-Outline Package Option AlsoAvailable in Tape and ReelDesigned-In Latch-Up Immunity TLC274CD Application InformationFigure: State-Variable Filter  Figure: Positive-Peak Detector   Figure: Logic-Array Power Supply   Figure: Single-Supply Function Generator   Figure: Low-Power Instrumentation Amplifier   Figure: Single-Supply Twin-T Notch Filter TLC274CD DatasheetYou can download the datasheet from the link given below:TLC274CD Datasheet TLC274CD SpecificationsProduct AttributeAttribute ValueManufacturer:Texas InstrumentsProduct Category:Precision AmplifiersSeries:TLC274Number of Channels:4 ChannelGBP - Gain Bandwidth Product:2.2 kHzSR - Slew Rate:3.6 V/usCMRR - Common Mode Rejection Ratio:80 dBOutput Current per Channel:30 mAIb - Input Bias Current:0.6 pAVos - Input Offset Voltage:1.1 mVen - Input Voltage Noise Density:25 nV/sqrt HzSupply Voltage - Max:16 VSupply Voltage - Min:3 VOperating Supply Current:2.7 mAOperating Temperature:-55°C ~ 125°CShutdown:No ShutdownMounting Style:SMD/SMTPackage / Case:SOIC-14Packaging:TubeAmplifier Type:Precision AmplifierBrand:Texas InstrumentsHeight:1.58 mmInput Type:Rail-to-RailLength:8.65 mmOperating Supply Voltage:3 V to 16 VPd - Power Dissipation:950 mWProduct:Precision AmplifiersProduct Type:Precision AmplifiersSubcategory:Amplifier ICsSupply Type:SingleTechnology:LinCMOSTradename:LinCMOSVcm - Common Mode Voltage:Negative Rail - 0.2 V to Positive Rail - 1 VVoltage Gain dB:87.23 dBWidth:3.91 mmUnit Weight:0.004318 oz TLC274CD ManufacturerTexas Instruments Incorporated (TI) is an American technology company headquartered in Dallas, Texas, that designs and manufactures semiconductors and various integrated circuits, which it sells to electronics designers and manufacturers globally. It is one of the top 10 semiconductor companies worldwide based on sales volume.The company's focus is on developing analog chips and embedded processors, which account for more than 80% of its revenue.TI also produces TI digital light processing technology and education technology products including calculators, microcontrollers and multi-core processors. The company holds 45,000 patents worldwide as of 2016. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. TLC274CD FAQWhat is TLC274CD?The TLC274 and TLC279 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices. What are quad operational amplifiers?It consists of four independent, high gains, internally compensated, low power operational amplifiers which have been designed to provide functional characteristics identical to those of the classic 741 operational amplifier. What are operational amplifiers used for?An Amplifier or an operational amplifier (op-amp) circuit is commonly used in the automation, control and other electronic circuits for marine applications. The applied input signal is usually a voltage or a current signal. The purpose of an amplifier is to produce an output signal larger than that of the input signal. 

CatalogProduct OverviewRN2483A-I/RM105 Related Video IntroductionRN2483A-I/RM105 CAD ModelsRN2483A-I/RM105 Pin ConfigurationRN2483A-I/RM105 Block DiagramRN2483A-I/RM105 FeaturesRN2483A-I/RM105 ApplicationsRN2483A-I/RM105 DatasheetRN2483A-I/RM105 SpecificationsRN2483A-I/RM105 ManufacturerUsing WarningRN2483A-I/RM105 FAQ Product OverviewMicrochip’s RN2483 Low-Power Long Range LoRa Technology Transceiver module provides an easy-touse, low-power solution for long range wireless data transmission. The advanced command interface offers rapid time to market. The RN2483 module complies with the LoRaWAN Class A protocol specifications. It integrates RF, a baseband controller, command Application Programming Interface (API) processor, making it a complete long range solution. The RN2483 module is suitable for simple long range sensor applications with external host MCU. RN2483A-I/RM105 Related Video IntroductionRN2483A-I/RM105 Video Description: Tutorial for connection Microchip RN2483 LoRa module to personal computer and using it with minicom on Ubuntu or another GNU/Linux distribution. RN2483A-I/RM105 CAD ModelsFigure: RN2483A-I RM105 PCB Symbol   Figure: RN2483A-I RM105 Footprint   Figure: RN2483A-I RM105 3D Models RN2483A-I/RM105 Pin ConfigurationFigure: RN2483A-I RM105 Pin Configuration RN2483A-I/RM105 Block Diagram Figure: RN2483A-I RM105 Block Diagram RN2483A-I/RM105 FeaturesGeneral FeaturesOn-Board LoRaWAN™ Protocol StackASCII Command Interface over UARTCompact Form Factor: 17.8 x 26.7 x 3.34 mmCastellated SMT Pads for Easy and Reliable PCBMountingEnvironmentally Friendly, RoHS CompliantEuropean RED Certified Radio ModuleDevice Firmware Upgrade (DFU) over UART, see“RN2483 LoRa® Technology Module CommandReference User’s Guide” (DS40001784) OperationalSingle Operating Voltage: 2.1V to 3.6V (3.3Vtypical)Temperature Range: -40°C to +85°CLow-Power ConsumptionProgrammable RF Communication Bit Rate up to300 kbps withFSK Modulation, 10937 bps with LoRa Technology ModulationIntegrated MCU, Crystal, EUI-64 Node IdentitySerial EEPROM,Radio Transceiver with Analog Front End, Matching Circuitry14 GPIOs for Control and Status, Shared with 13Analog Inputs RF/Analog FeaturesLow-Power Long Range Transceiver Operating inthe 433 MHzand 868 MHz Frequency BandsHigh Receiver Sensitivity: Down to -146 dBmTX Power: Adjustable up to +14 dBm highEfficiency PAFSK, GFSK and LoRa Technology ModulationIIP3 = -11 dBmUp to 15 km Coverage at Suburban and up to 5km Coverage at Urban Area RN2483A-I/RM105 ApplicationsAutomated Meter ReadingHome and Building AutomationWireless Alarm and Security SystemsIndustrial Monitoring and ControlMachine to Machine (M2M)Internet of Things (IoT) RN2483A-I/RM105 DatasheetYou can download the datasheet from the link given below:RN2483A-I/RM105 Datasheet RN2483A-I/RM105 SpecificationsProduct AttributeAttribute ValueManufacturer:MicrochipProduct Category:Sub-GHz ModulesSeries:RN2483Frequency:434 MHz, 868 MHzOutput Power:14 dBmInterface Type:UARTOperating Supply Voltage:2.1 V to 3.6 VSupply Current Transmitting:40 mASupply Current Receiving:14.2 mAOperating Temperature:-40°C ~ 85°CPackaging:TrayBrand:Microchip TechnologyMoisture Sensitive:YesProduct Type:Multiprotocol ModulesSubcategory:Embedded SolutionsTradename:LoRaUnit Weight:0.466375 oz RN2483A-I/RM105 ManufacturerMicrochip Technology Inc. is a publicly-listed American corporation that manufactures microcontroller, mixed-signal, analog and Flash-IP integrated circuits. Its products include microcontrollers (PIC, dsPIC, AVR and SAM), Serial EEPROM devices, Serial SRAM devices, embedded security devices, radio frequency (RF) devices, thermal, power and battery management analog devices, as well as linear, interface and wireless products. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. RN2483A-I/RM105 FAQWhat is RN2483A-I/RM105?The RN2483 is a fully-certified 433MHz / 868MHz module based on wireless LoRaWAN® (Low Power Wide Area Network) technology. The RN2483 Module utilizes a unique spread spectrum modulation within the sub-GHz band to enable long-range, low power, and high network capacity. What is an RF Transceiver?RF transceivers are devices or modules that contain both a transmitter (Tx) and a receiver (Rx). Tx and Rx elements usually share functionality including antenna interface, low pass filtering, Rx/Tx switching and associated control circuits. What is the function of RF transceiver?RF transceivers are electronic devices that receive and demodulate radio frequency (RF) signals, and then modulate and transmit new signals. They are used in many different video, voice and data applications. How does an RF module work?As the name suggests, RF module operates at Radio Frequency. This frequency range varies between 30 kHz & 300 GHz. In this RF system, the digital data is represented as variations in the amplitude of carrier wave. The RF transmitter receives serial data and transmits it wirelessly through through its RF antenna. How do RF modules transmit data?An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps - 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter. 

Catalog2SK170 Features2SK170 PinoutAbsolute Maximum RatingsElectrical CharacteristicsTypical Performance CharacteristicsRestrictions On Product Use2SK170 Manufacturer2SK170 DatasheetUsing Warnings2SK170 FAQ 2SK170 FeaturesRecommended for first stages of EQ and M.C. head amplifiers.High |Yfs|: |Yfs| = 22 mS (typ.) (VDS = 10 V, VGS = 0, IDSS = 3 mA)High breakdown voltage: VGDS = −40 VLow noise: En = 0.95 nV/Hz1/2 (typ.) (VDS = 10 V, ID = 1 mA, f = 1 kHz)High input impedance: IGSS = −1 nA (max) (VGS = −30 V) 2SK170 Pinout 2SK170 Pinout Absolute Maximum RatingsCharacteristicsSymbolRatingUnitGate-drain voltageVGDS-40VGate currentIG10mADrain power dissipationPD400mWJunction temperatureTj125°CStorage temperature rangeTstg-55~125°C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical CharacteristicsCharacteristicsSymbolTest ConditionMinTyp.MaxUnitGate cut-off currentIGSSVGS = -30 V, VDS = 0¾¾-1.0nAGate-drain breakdown voltageV (BR) GDSVDS = 0, IG = -100 mA-40¾¾V Drain currentIDSS(Note)VDS = 10 V, VGS = 0 2.6 ¾ 20 mAGate-source cut-off voltageVGS (OFF)VDS = 10 V, ID = 0.1 mA-0.2¾-1.5VForward transfer admittanceïYfsïVDS = 10 V, VGS = 0, f = 1 kHz¾22¾mSInput capacitanceCissVDS = 10 V, VGS = 0, f = 1 MHz¾30¾pFReverse transfer capacitanceCrssVDG = 10 V, ID = 0, f = 1 MHz¾6¾pF  Noise figureNF (1)VDS = 10 V, ID = 1.0 mA, RG = 1 kW,f = 1 kHz¾1.010  dBNF (2)VDS = 10 V, ID = 1.0 mA, RG = 1 kW,f = 1 kHz¾0.52 Note: IDSS classification GR: 2.6~6.5 mA, BL: 6.0~12 mA, V: 10~20 mA Typical Performance Characteristics Static Characteristics Id - Vds (low Voltage Region) ID - VGS |Yfs|-ID |Yfs|-IDSS VGS (OFF)-IDSS Ciss-VDS Crss-VGD En-ID NF-ID NF-VDS NF-RG NF-f IGSX - VDS Restrictions On Product UseToshibaCorporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without Thisdocument and any information herein may not be reproduced without prior written permission from  Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.ThoughTOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or  Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.Productis intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this  Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.Donot disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in Productshall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or Theinformation contained herein is presented only as guidance for Product  No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.ABSENTA WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR Donot use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.Pleasecontact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of  Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 2SK170 ManufacturerToshiba Electronic Devices & Storage Corporation (TDSC) offers a broad IC and discrete product line-up which includes Power, Small Signal, Optoelectronics, and Logic devices for automotive, multimedia, industrial, telecoms, and networking applications. TDSC develops, manufactures, and supplies innovative storage products including Enterprise and Consumer HDDs. 2SK170 DatasheetYou can download 2SK170 datasheet from the link given below:2SK170 Datasheet Using WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. 2SK170 FAQWhat is a field effect transistor?The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor. FETs are devices with three terminals: source, gate, and drain. Field effect transistors generally display very high input impedance at low frequencies. What is difference between transistor and field effect transistor?Key Difference between BJT and FET. Bipolar junction transistors are bipolar devices, in this transistor, there is a flow of both majority & minority charge carriers. Field-effect transistors are unipolar devices, in this transistor, there are only the majority charge carriers flows. Why BJT and FET named so?Bipolar transistors are so named because they conduct by using both majority and minority carriers. The field-effect transistor (FET), sometimes called a unipolar transistor, uses either electrons (in N-channel FET) or holes (in P-channel FET) for conduction. You are correct. There are fields inside of a BJT.

CatalogProduct OverviewNCP803SN308T1G Related Video IntroductionNCP803SN308T1G CAD ModelsNCP803SN308T1G Pin ConfigurationNCP803SN308T1G Marking DiagramNCP803SN308T1G FeaturesNCP803SN308T1G Typical ApplicationsNCP803SN308T1G Typical Operating CharacteristicsNCP803SN308T1G DatasheetNCP803SN308T1G SpecificationsNCP803SN308T1G ManufacturerUsing WarningNCP803SN308T1G FAQ Product OverviewThe MAX803/NCP803 is a cost−effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 10 μsec of VCC falling through the reset voltage threshold. Reset is maintained active for a timeout period which is trimmed by the factory after VCC rises above the reset threshold. The MAX803/NCP803 has an open drain active−low RESET output. Both devices are available in SOT−23 and SC−70 packages. The MAX803/NCP803 is optimized to reject fast transient glitches on the VCC line. Low supply current of 0.5 μA (VCC = 3.2 V) make these devices suitable for battery powered applications. NCP803SN308T1G Related Video IntroductionNCP803SN308T1G Video Description: Microprocessors are considered to be the brain of computer memory. They were first developed in 1971, by a group of individuals at Intel. Since then there has been a vast development in them, with every new processor in the market having faster processing speed. Not all devices use microprocessor  s as some may not require processing capacity while some are created for that. Fans and tube lights will not need microprocessor  s whereas remote and traffic lights need them. They have an in-built algorithm that gives a certain output. The microprocessor  performs all mathematical and logical functions through the ALU segment, with the help of registers and control units. ALU - Arithmetic Logic Units performs all mathematical calculations with the data given.Registers -  The registers are temporary data storage locations in the microprocessor, Control Units -  It dictates how the internal memory of the computer should respond to the given instructions and controls the flow of data between the microprocessor  and the system. They are connected to the I/O devices and memory of the system. They follow a simple fetch, decode and execute cycle to carry out an instruction. The working of a microprocessor  follows a simple fetch, decode and execute cycle. NCP803SN308T1G CAD ModelsFigure: NCP803SN308T1G PCB Symbol   Figure: NCP803SN308T1G Footprint   Figure: NCP803SN308T1G 3D Models NCP803SN308T1G Pin ConfigurationFigure: NCP803SN308T1G Pin Configuration NCP803SN308T1G Marking DiagramFigure: NCP803SN308T1G Marking Diagramxxx = Specific Device CodeM = Date CodeMicrodot = Pb−Free Package(Note: Microdot may be in either location) NCP803SN308T1G FeaturesPrecision VCCMonitor for 1.5 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 VSuppliesPrecision Monitoring Voltages from 1.2 V to 4.9 V Availablein 100 mV StepsFour Guaranteed Minimum Power−On Reset Pulse WidthAvailable(1 ms, 20 ms, 100 ms, and 140 ms)RESET Output Guaranteed to VCC= 1.0 VLow Supply CurrentVCCTransient ImmunityNo External ComponentsWide Operating Temperature: −40°C to 105°CThese Devices are Pb−Free and are RoHS Compliant  NCP803SN308T1G Typical ApplicationsComputersEmbedded SystemsBattery Powered EquipmentCritical Microprocessor Power Supply MonitoringFigure: NCP803SN308T1G Typical Application Diagram NCP803SN308T1G Typical Operating CharacteristicsFigure: Supply Current vs. Supply Voltage   Figure: Normalized Reset Threshold Voltage vs. Temperature   Figure: Supply Current vs. Temperature   Figure: Output Voltage Low vs. Supply Voltage   Figure: Power−Down Reset Delay vs. Temperature and Overdrive (VTH = 1.2 V)   Figure: Power−Down Reset Delay vs. Temperature and Overdrive (VTH = 4.63 V)   Figure: Normalized Power−Up Reset vs. Temperature NCP803SN308T1G DatasheetYou can download the datasheet from the link given below:NCP803SN308T1G Datasheet NCP803SN308T1G SpecificationsProduct AttributeAttribute ValueManufacturer:onsemiProduct Category:Supervisory CircuitsType:Voltage SupervisoryMounting Style:SMD/SMTPackage / Case:SOT-23-3Threshold Voltage:3.08 VNumber of Inputs Monitored:1 InputOutput Type:Active Low, Open DrainManual Reset:No Manual ResetWatchdog Timers:No WatchdogBattery Backup Switching:No BackupReset Delay Time:460 msSupply Voltage - Max:5.5 VOperating Temperature:-40°C ~ 105°C (TJ)Series:NCP803Brand:onsemiChip Enable Signals:No Chip EnableFeatures:No Internal HysteresisHeight:0.94 mmLength:2.9 mmOperating Supply Current:800 nAOvervoltage Threshold:3.11 VPower Fail Detection:NoProduct Type:Supervisory CircuitsSubcategory:PMIC - Power Management ICsSupply Voltage - Min:1 VUndervoltage Threshold:3.08 VWidth:1.3 mmUnit Weight:0.000282 oz NCP803SN308T1G ManufacturerOnsemi is driving energy efficient innovations, empowering customers to reduce global energy use. The company offers a comprehensive portfolio of energy efficient power and signal management, logic, discrete and custom solutions to help design engineers solve their unique design challenges in automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power supply applications. onsemi operates a responsive, reliable, world-class supply chain and quality program, and a network of manufacturing facilities, sales offices and design centers in key markets throughout North America, Europe, and the Asia Pacific regions. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. NCP803SN308T1G FAQWhat is microprocessor and its uses?The microprocessor is the central unit of a computer system that performs arithmetic and logic operations, which generally include adding, subtracting, transferring numbers from one area to another, and comparing two numbers. It's often known simply as a processor, a central processing unit, or as a logic chip. Is a microprocessor a CPU?Though some IT administrators use CPU and microprocessor interchangeably, the reality is that most CPUs are microprocessors but not every microprocessor is a CPU. In the early days of IT, CPUs were a system's main workhorse as they handled a variety of computer commands that were often complex and time consuming. What is a reset monitor?A reset IC monitor is supply voltage and resets or turns off another device like a microprocessor if the supply voltage is low. These devices usually have a programmable output delay to prevent the system from returning from reset before the supply voltage is stable. 

CatalogTOP247YN DescriptionTOP247YN Related Video InstructionTOP247YN CAD ModelsTOP247YN Pin ConfigurationTOP247YN Block DiagramTOP247YN FeaturesTOP247YN Application ExamplesTOP247YN DatasheetTOP247YN SpecificationsTOP247YN ManufacturerUsing WarningTOP247YN FAQTOP247YN DescriptionTOPSwitch-GX uses the same proven topology as TOPSwitch, cost effectively integrating the high voltage power MOSFET , PWM control, fault protection and other control circuitry onto a single CMOS chip. Many new functions are integrated to reduce system cost and improve design flexibility, performance and energy efficiency. Depending on package type, either 1 or 3 additional pins over the TOPSwitch standard DRAIN, SOURCE and CONTROL terminals allow the following functions: line sensing (OV/UV, line feed-forward/DCMAX reduction), accurate externally set current limit, remote ON/OFF, synchronization to an external lower frequency, and frequency selection (132 kHz/66 kHz). All package types provide the following transparent features: Soft-start, 132 kHz switching frequency (automatically reduced at light load), frequency jittering for lower EMI , wider DCMAX, hysteretic thermal shutdown, and larger creepage packages. In addition, all critical parameters (i.e. current limit, frequency, PWM gain) have tighter temperature and absolute tolerances to simplify design and optimize system cost. TOP247YN Related Video InstructionVideo:TOP247YN TOP247YN CAD Models Figure: PCB Symbol  Figure: Footprint  Figure: 3D Model TOP247YN Pin Configuration Figure: Pin Configuration TOP247YN Block Diagram Figure: Block Diagram TOP247YN FeaturesExtended power range for higher power applicationsNo heatsink required up to 34 W using P/G packagesFeatures eliminate or reduce cost of external componentsFully integrated soft-start for minimum stress/overshootExternally programmable accurate current limitWider duty cycle for more power, smaller input capacitorSeparate line sense and current limit pins on Y/R/F packagesLine under-voltage (UV) detection: no turn off glitchesLine overvoltage (OV) shutdown extends line surge limitLine feed-forward with maximum duty cycle (DCMAX) reduction rejects line ripple and limits DCMAX at high lineFrequency jittering reduces EMI and EMI filtering costsRegulates to zero load without dummy loading132 kHz frequency reduces transformer/power supply sizeHalf frequency option in Y/R/F packages for video applicationsHysteretic thermal shutdown for automatic fault recoveryLarge thermal hysteresis prevents PC board overheating TOP247YN Application ExamplesFigure: Application Examples 01  Figure: Application Examples 02  Figure: Application Examples 03  Figure: Application Examples 04  Figure: Application Examples 05 TOP247YN DatasheetYou can download the datasheet from the link given below.TOP247-Datasheet TOP247YN SpecificationsManufacturer:Power IntegrationsProduct Category:AC/DC ConvertersMounting Style:Through HolePackage / Case:TO-220Output Voltage:12 VInput / Supply Voltage - Min:85 VACInput / Supply Voltage - Max:265 VACSwitching Frequency:132 kHzDuty Cycle - Max:0.83Operating Supply Current:2.2 mAMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature:+ 150 ℃Series:TOP247Packaging:TubeManufacturer:Power IntegrationsBrand:Power IntegrationsProduct Type:AC/DC ConvertersFactory Pack Quantity:50Subcategory:PMIC - Power Management ICsTradename:TopSwitchType:Off Line ConverterUnit Weight:0.081130 oz TOP247YN ManufacturerPower Integrations, Inc., is a Silicon Valley-based supplier of high-performance electronic components used in high-voltage power-conversion systems. Our integrated circuits and diodes enable compact, energy-efficient AC-DC power supplies for a vast range of electronic products including mobile devices, TVs, PCs, appliances, smart utility meters and LED lights. Our SCALE™ IGBT drivers enhance the efficiency, reliability and cost of high-power applications such as industrial motor drives, solar and wind energy systems, electric vehicles and high-voltage DC transmission. Since its introduction in 1998, Power Integrations' EcoSmart® energy-efficiency technology has prevented billions of dollars' worth of energy waste and millions of tons of carbon emissions. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. TOP247YN FAQWhat is an offline converter?In off-line converters the ac voltage is rectified to dc directly off the ac power line and filtered with no isolation transformer and then processed with a dc-dc converter that provides isolation at the switching frequency. Are AC-DC converters efficient?In the DC/DC converters that are installed in electronic equipment and other products, it is not unusual for high efficiencies of around 95% or so to be achieved, and so it certainly can be said that efficiency levels are fairly high. What is the use of converter?Converters are electrical devices that convert the voltage from alternating current (AC) to direct current (DC). Inverters are electrical devices that convert the voltage from direct current (DC) to alternating current (AC).