Phone

    00852-6915 1330

The Kynix Components - Discrete Semiconductor Products

Stay Ahead with Expert Electronics Insights,
Industry Trends, and Innovative Tips

Discrete Semiconductor Products

1N4004: Standard Rectifier, 400 V, 1.0 A

CatalogFeaturesTypical ApplicationsMechanical DataPrimary CharacteristicsMaximum RatingsElectrical CharacteristicsThermal CharacteristicsOrdering InformationRatings and Characteristics Curves1N4004 PackageDisclaimer1N4004 DatasheetUsing Warnings1N4004 FAQ FeaturesLow forward voltage dropLow leakage currentHigh forward surge capabilitySolder dip 275 °C max. 10 s, per JESD 22-B106 Typical ApplicationsFor use in general purpose rectification of power supplies, inverters, converters, and freewheeling diodes application. Mechanical DataCase: DO-41 (DO-204AL), molded epoxy bodyMolding compound meets UL 94 V-0 flammability ratingBase P/N-E3 - RoHS-compliant, commercial grade Terminals: matte tin plated leads, solderable perJ-STD-002 and JESD 22-B102E3 suffix meets JESD 201 class 1A whisker test Polarity: color band denotes cathode end Primary CharacteristicsPRIMARY CHARACTERISTICSIF(AV)1.0 AVRRM50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 VIFSM (8.3 ms sine-wave)30 AIFSM (square wave tp = 1 ms)45 AVF1.1 VIR5.0 μATJ max.150 °CPackageDO-41 (DO-204AL)Circuit configurationSingle Maximum RatingsMAXIMUM RATINGS (TA = 25 °C unless otherwise noted)PARAMETERSYMBOL1N40011N40021N40031N40041N40051N40061N4007UNITMaximum repetitive peak reverse voltageVRRM501002004006008001000VMaximum RMS voltageVRMS3570140280420560700VMaximum DC blocking voltageVDC501002004006008001000VMaximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 75 °CIF(AV)1.0APeak forward surge current 8.3 ms single half sine-wave superimposed on rated loadIFSM30ANon-repetitive peak forward surge current square waveform TA = 25 °C (fig. 3)tp = 1 ms IFSM45 A tp = 2 ms 35  tp = 5 ms 30 Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length TL = 75 °CIR(AV)30μARating for fusing (t < 8.3 ms)I2t (1)3.7A2sOperating junction and storage temperature rangeTJ, TSTG-50 to +150°C NoteFor device using on bridge rectifier application Electrical CharacteristicsELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)PARAMETERTEST CONDITIONSSYMBOL1N40011N40021N40031N40041N40051N40061N4007UNITMaximum instantaneous forward voltage1.0 AVF1.1VMaximum DC reverse current at rated DC blocking voltage TA = 25 °C IR5.0 μA  TA = 125 °C 50 Typical junction capacitance4.0 V, 1 MHzCJ15pF Thermal CharacteristicsTHERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)PARAMETERSYMBOL1N40011N40021N40031N40041N40051N40061N4007UNIT Typical thermal resistanceRqJA (1)50 °C/W RqJL (1)25  Note(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted Ordering InformationORDERING INFORMATION (Example)PREFERRED P/NUNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODE1N4004-E3/540.3354550013" diameter paper tape and reel1N4004-E3/730.33733000Ammo pack packaging Ratings and Characteristics CurvesThe followings are the figures of 1N4004 ratings and characteristics curves. Forward Current Derating Curve Maximum Non-repetitive Peak Forward Surge Current Non-Repetitive Peak Forward Surge Current Typical Junction Capacitance Typical Instantaneous Forward Characteristics Typical Transient Thermal Impedance Typical Reverse Characteristics 1N4004 PackageThe following diagram shows the 1N4004 package. 1N4004 Package DisclaimerALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 1N4004 DatasheetYou can download 1N4004 datasheet from the link given below:1N4004 Datasheet Using WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. 1N4004 FAQWhat is a Standard Rectifier?A rectifier diode lets electrical current flow in only one direction and is mainly used for power supply operation. Rectifier diodes can handle higher current flow than regular diodes and are generally used in order to change alternating current into direct current. Which type of diode is used in rectifier?For power rectification applications, power diodes or Schottky diodes are normally used. For signal rectification small point contact diodes, signal diodes, or Schottky diodes may be used. The Schottky diode has the advantage that it only requires a forward voltage of around 0.2 - 0.3volts for forward conduction. How many diodes does a rectifier have?There are four diodes in the full-wave rectifier circuit. When the AC source voltage is positive, the current flows through D1 to the load and back to the AC source via D2. What is the limitation of a diode rectifier?It needs four diodes. The circuit is not suitable when a small voltage is required to be rectified. It is because, in this case, the two diodes are connected in series and offer double voltage drop due to their internal resistance. What is the most widely used rectifier?Silicon diodes are the most widely used rectifiers for lower voltages and powers, and have largely replaced other rectifiers. 
Kynix On 2022-01-05   284
Discrete Semiconductor Products

2SK170 Datasheet, Equivalent, N-Channel MOSFET [FAQ]

Catalog2SK170 Features2SK170 PinoutAbsolute Maximum RatingsElectrical CharacteristicsTypical Performance CharacteristicsRestrictions On Product Use2SK170 Manufacturer2SK170 DatasheetUsing Warnings2SK170 FAQ 2SK170 FeaturesRecommended for first stages of EQ and M.C. head amplifiers.High |Yfs|: |Yfs| = 22 mS (typ.) (VDS = 10 V, VGS = 0, IDSS = 3 mA)High breakdown voltage: VGDS = −40 VLow noise: En = 0.95 nV/Hz1/2 (typ.) (VDS = 10 V, ID = 1 mA, f = 1 kHz)High input impedance: IGSS = −1 nA (max) (VGS = −30 V) 2SK170 Pinout 2SK170 Pinout Absolute Maximum RatingsCharacteristicsSymbolRatingUnitGate-drain voltageVGDS-40VGate currentIG10mADrain power dissipationPD400mWJunction temperatureTj125°CStorage temperature rangeTstg-55~125°C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical CharacteristicsCharacteristicsSymbolTest ConditionMinTyp.MaxUnitGate cut-off currentIGSSVGS = -30 V, VDS = 0¾¾-1.0nAGate-drain breakdown voltageV (BR) GDSVDS = 0, IG = -100 mA-40¾¾V Drain currentIDSS(Note)VDS = 10 V, VGS = 0 2.6 ¾ 20 mAGate-source cut-off voltageVGS (OFF)VDS = 10 V, ID = 0.1 mA-0.2¾-1.5VForward transfer admittanceïYfsïVDS = 10 V, VGS = 0, f = 1 kHz¾22¾mSInput capacitanceCissVDS = 10 V, VGS = 0, f = 1 MHz¾30¾pFReverse transfer capacitanceCrssVDG = 10 V, ID = 0, f = 1 MHz¾6¾pF  Noise figureNF (1)VDS = 10 V, ID = 1.0 mA, RG = 1 kW,f = 1 kHz¾1.010  dBNF (2)VDS = 10 V, ID = 1.0 mA, RG = 1 kW,f = 1 kHz¾0.52 Note: IDSS classification GR: 2.6~6.5 mA, BL: 6.0~12 mA, V: 10~20 mA Typical Performance Characteristics Static Characteristics Id - Vds (low Voltage Region) ID - VGS |Yfs|-ID |Yfs|-IDSS VGS (OFF)-IDSS Ciss-VDS Crss-VGD En-ID NF-ID NF-VDS NF-RG NF-f IGSX - VDS Restrictions On Product UseToshibaCorporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without Thisdocument and any information herein may not be reproduced without prior written permission from  Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.ThoughTOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or  Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.Productis intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this  Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.Donot disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in Productshall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or Theinformation contained herein is presented only as guidance for Product  No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.ABSENTA WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR Donot use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.Pleasecontact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of  Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 2SK170 ManufacturerToshiba Electronic Devices & Storage Corporation (TDSC) offers a broad IC and discrete product line-up which includes Power, Small Signal, Optoelectronics, and Logic devices for automotive, multimedia, industrial, telecoms, and networking applications. TDSC develops, manufactures, and supplies innovative storage products including Enterprise and Consumer HDDs. 2SK170 DatasheetYou can download 2SK170 datasheet from the link given below:2SK170 Datasheet Using WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. 2SK170 FAQWhat is a field effect transistor?The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor. FETs are devices with three terminals: source, gate, and drain. Field effect transistors generally display very high input impedance at low frequencies. What is difference between transistor and field effect transistor?Key Difference between BJT and FET. Bipolar junction transistors are bipolar devices, in this transistor, there is a flow of both majority & minority charge carriers. Field-effect transistors are unipolar devices, in this transistor, there are only the majority charge carriers flows. Why BJT and FET named so?Bipolar transistors are so named because they conduct by using both majority and minority carriers. The field-effect transistor (FET), sometimes called a unipolar transistor, uses either electrons (in N-channel FET) or holes (in P-channel FET) for conduction. You are correct. There are fields inside of a BJT.
Kynix On 2021-12-29   545
Discrete Semiconductor Products

GBPC3504-Onsemi-Bridge Rectifier, Single Phase, 400 V

CatalogGBPC3504 FeaturesGBPC3504 PinoutAbsolute Maximum RatingsThermal CharacteristicsElectrical CharacteristicsTypical Performance CharacteristicsOrdering InformationPackage DimensionsGBPC3504 ManufacturerGBPC3504 DatasheetUsing Warnings GBPC3504 FeaturesIntegrally Molded Heat- Sink Provided Very Low ThermalResistance  for Maximum Heat DissipationSurge Overload Ratings from 300 A to 400AIsolated Voltage from Case to Lead over 2500 VUL Certified, UL #E258596Terminals Finish Material◆Silver (Solderable per MIL-STD-202, Method 208 for the wire type GBPC- W  package)◆Nickel for GBPC packageMounting Torque: 20 in-lbs MaximumThese are Pb-Free DevicesSuffx“W"Wire Lead Structure GBPC3504 PinoutThe following figure is the diagram of GBPC3504 pinout. GBPC3504 Pinout Absolute Maximum RatingsSymbol ParameterValue Units  005010204060810 VRRMMaximum Repetitive Reverse Voltage501002004006008001000VVRMSMaximum RMS Bridge Input Voltage3570140280420560700VVRDC Reverse Voltage (Rated VR)501002004006008001000VIF(AV)Average Rectified Forward Current at TC = 55°CGBPC1212A  GBPC1515   GBPC2525   GBPC3535 IFSMNon−Repetitive Peak Forward Surge CurrentGBPC12, 15, 25300A 8.3 ms Single Half−Sine−WaveGBPC35400ATSTGStorage Temperature Range−55 to +150°CTJOperating Junction Temperature−55 to +150°C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.These ratings are limiting values above which the serviceability of any semiconductor device may by impaired. Thermal CharacteristicsSymbolParameterValueUnitPDPower Dissipation83.3WRqJCThermal Resistance, Junction to Case (Note 2)1.5°C/W With Heatsink. Electrical CharacteristicsSymbolParameterTest ConditionsValueUnitVFForward Voltage Drop, per bridge6.0 AGBPC121.1 (Max)V  7.5 AGBPC15    12.5 AGBPC25    17.5 AGBPC35  IRReverse Current, per element at Rated VRTA = 25°C5.0 (Max)µA  TA = 125°C500 (Max)µAI2tRating for Fusing t < 8.35 msGBPC12, 15, 25375A2Sec  GBPC35660A2SecCTTotal Capacitance, per leg VR = 4.0 V, f = 1.0 MHzGBPC12, 15, 25180pF  GBPC35200pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Typical Performance Characteristics Forward Current Derating Curve Non−Repetitive Surge Current Forward Voltage Characteristics Reverse Current vs. Reverse Voltage Ordering InformationPart NumberMarkingPackagePacking MethodGBPC12005GBPC12005GBPC 4L(Pb−Free)BulkGBPC1201GBPC1201GBPC1202GBPC1202GBPC1204GBPC1204GBPC1206GBPC1206GBPC1208GBPC1208GBPC1210GBPC1210GBPC15005GBPC15005GBPC1501GBPC1501GBPC1502GBPC1502GBPC1504GBPC1504GBPC1506GBPC1506GBPC1508GBPC1508GBPC1510GBPC1510GBPC25005GBPC25005GBPC2501GBPC2501GBPC2502GBPC2502GBPC2504GBPC2504GBPC2506GBPC2506GBPC2508GBPC2508GBPC2510GBPC2510GBPC35005GBPC35005GBPC3501GBPC3501GBPC3502GBPC3502GBPC3504GBPC3504GBPC3506GBPC3506GBPC3508GBPC3508GBPC3510GBPC3510GBPC1201WGBPC1201WGBPC−W 4L(Pb−Free)GBPC1202WGBPC1202WGBPC1204WGBPC1204WGBPC1206WGBPC1206WGBPC1208WGBPC1208WGBPC1210WGBPC1210WGBPC15005WGBPC15005WGBPC1501WGBPC1501WGBPC1502WGBPC1502WGBPC1504WGBPC1504WGBPC1506WGBPC1506WGBPC1508WGBPC1508W Package DimensionsThe following diagram shows the GBPC3504 package. GBPC3504 Package GBPC3504 ManufacturerON Semiconductor is a Fortune 500 company driving energy efficient innovations, empowering customers to reduce global energy use. The company is a leading supplier of semiconductor-based solutions, offering a comprehensive portfolio of energy efficient power and signal management, logic, standard and custom devices. The company’s products help engineers solve their unique design challenges in automotive, communications, computing, consumer, industrial, medical and military/aerospace applications. GBPC3504 DatasheetYou can download GBPC3504 datasheet from the link given below:GBPC3504 Datasheet Using WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. GBPC3504 FAQWhat does a bridge rectifier do?A bridge rectifier provides full-wave rectification from a two-wire AC input, resulting in lower cost and weight as compared to a rectifier with a 3-wire input from a transformer with a center-tapped secondary winding. Diodes are also used in bridge topologies along with capacitors as voltage multipliers. What are the advantages of bridge rectifier?The need for the center-tapped transformer is eliminated. It can be used in application floating output terminals, no output terminal is grounded. Transformer utilization factor, in case of the bridge rectifier, is higher than that of a center tap rectifier. Which is better center tapped or bridge rectifier?Bridge rectifier has certain advantages over centre tap rectifier. It possesses better transformer utilization factor, better voltage regulation etc. But it also has a drawback of more voltage drop as compared to centre tap as it has four diodes.
Kynix On 2021-12-29   352
Discrete Semiconductor Products

2N3819 N-channel JFET: Datasheet, Pinout, Equivalents [FAQ]

Product Overview 2N3819 is a general-purpose N-channel Junction Field Effect Transistor. It operates in depletion-mode and requires reverse biasing to turn off. It is designed for medium to high range frequencies. Furthermore, it has a high gain for wideband frequencies and has an importance in VHF/UHF based systems. It is a small-signal device capable of fast switching, signal amplification, and mixing in low noise applications.   This blog will introduce 2N3819 systematically from its features, pinout to its specifications, applications, also including 2N3819 datasheet and so much more.   Catalog Product Overview 2N3819 Features 2N3819 Pinout 2N3819 Pin Configuration 2N3819 Applications 2N3819 Equivalents 2N3819 CAD Models 2N3819 Interfacing Diagram Where to use 2N3819? 2N3819 Circuit Diagram 2N3819 Package 2N3819 Specification 2N3819 Manufacturer 2N3819 Datasheet Using Warnings 2N3819 FAQ   2N3819 Features Type: JFET - N - Channel - DepletionDrain to Source Voltage (VDS) = 25VDrain to Gate Voltage (VDG) = 25VGate to Source Voltage (VGS) = 25VDrain Current (ID)= 0.1 AGate-Source Cut-off Voltage (VGS(off)) = -8.0 Vdc (VDS = 15 Vdc, ID = 10 nAdc)Cut-off Frequency (Note 1) = 700 Mhz (VDS = 15 Vdc, VGS = 0)   2N3819 Pinout The following figure is the diagram of 2N3819 pinout.   2N3819 Pinout   2N3819 Pin Configuration NumberPin NameFunction1SourceSource pin2GateGate pin3DrainDrain pin   2N3819 Applications Low noise applications Modulation of signalsWideband amplifying systemsVHF/UHF mixersHigh-Speed Switching SystemsRF reception and transmission   2N3819 Equivalents 2N44162SK1622N5638NTE312   2N3819 CAD Models The followings are 2N3819 Symbol, Footprint.   2N3819 Symbol   2N3819 Footprint   2N3819 Interfacing Diagram The below image is showing the standard application of the N-Channel JFET 2N3819 as an amplifier.   The C1 is the coupling capacitor and the C2 is the DC blocking capacitor where the output will be harvested. The RC is the collector Resistor and changing this value will change the frequency response of the circuit as well as it will control the DC gain by controlling the collector current. R1 and R2 are used as a voltage divider for biasing the JFET.   A typical value for 12V operation could be: R1 = 100k, R2 = 10k, RC= 10k, and C1, C2 can be 1uF ceramic capacitors.   2N3819 Interfacing Diagram   Where to use 2N3819? This N-channel JFET can be used for low side switching only. Because N-channel JFETs are used to drive low-side power paths only. But if you want to drive a high-side load, you can use any other P-channel JFET. Another important point here to note here is that the drain current of 2N3819 JFET is 100mA. Hence, it will be used for an application that only requires less than 100mA Drain current.   2N3819 Circuit Diagram The following circuit shows the example of 2N3819 JFET as a switch. A DC voltmeter is connected between Drain and sourcr terminal to measure voltage across Drain terminal.   When zero voltage is applied to the Gate terminal of N-channel JFET, FET  operates in saturation mode and It acts like a closed circuit and almost zero voltage appears across the Drain terminal as you can see on the DC voltmeter  . Similarly, when enough negative voltage is applied to Gate terminal of N-channel JFET, FET operates in the cut-off region and It acts as an open circuit and input voltage source (+25V) appears across Drain terminal as you can see on the DC voltmeter.    N-Channel JFET as a Switch   The circuitry for an AC  field detector is shown above:   AC field detector Circuit Diagram   It will explain the working of 2N3819 N-Channel JFET as a field detector. The transistor source terminal is connected with 6-12 Volts of power source to supply voltage to 555 Timer IC. The IC  is further connected with an LED, which brightens when the timer turns on, and a buzzer that produces sound whenever a signal is detected. An antenna is connected to the gate of 2N3819 to detect the  AC field. Whenever the antenna senses a charge or a wave, it will induce a voltage and pass it to the gate terminal. The change in the gate voltage alters ID and activates the TimerIC,  As a result, the led starts to blink, showing the activation of the IC.  and the buzzer produces the sound to indicate that a charge is detected by the antenna.   2N3819 Package The following diagram shows the 2N3819 package.   2N3819 Package   2N3819 Specification SpecificationValuePackageTO-92-3Transistor PolarityNMaximum Gate Source Voltage-25 VZero-Gate Voltage Drain Current20 mAMaximum Drain Gate Voltage25 VMountingThrough HolePackagingBoxTransistor TypeJFETNo. of Pins3 Pin   2N3819 Manufacturer For over 40 years, NTE Electronics, Inc.  has been a leading supplier of high-quality NTE and ECG brand name electrical and electronic components. Product lines include semiconductors, relays, resistors, capacitors, cable ties and bundle management products, LED lighting, optoelectronics, potentiometers and trimmers, RF connectors, heat shrink, soldering irons, soldering stations, and heat guns, solder wick, AC/DC adapters, clips and test leads, terminals and connectors, fuses, fans, tools and hardware, wire and cable, and more.   2N3819 Datasheet You can download 2N3819 datasheet from the link given below: 2N3819 Datasheet   Using Warnings Note: Please check their parameters and pin configuration before replacing them in your circuit.   2N3819 FAQ What is the working principle of N channel JFET? An n-type channel is formed between two p-type layers which are connected to the gate. Majority carrier electrons flow from the source and exit the drain, forming the drain current.   What is the difference between N channel and P-channel JFET? There are two types of JFET: n-channel and p-channel. Due to the fact that electrons move faster than holes, n-channel JFETs are more common than p-channel JFETs. The conduction level in a bipolar junction transistor (BJT) depends on two charge carriers – electrons and holes.   Which is the majority charge carrier in n-channel JFET? Electrons are the majority charge carrier in N-channel JFET. The channel formed is in between source and drain which are made of p-type semiconductor material.   What is the direction of current flow in N-channel JFET? When a voltage greater than pinch off is applied, the current starts flowing from Drain to source.   What does N channel mean? An N-Channel MOSFET is made up of an N channel, which is a channel composed of a majority of electron current carriers. The gate terminals are made up of P material. Depending on the voltage quantity and type (negative or positive) determines how the transistor operates whether it turns on or off.
Kynix On 2021-12-22   1287
Discrete Semiconductor Products

SQD40P10-40L_GE3 Automotive P-Channel MOSFET

CatalogFeaturesProduct SummaryOrdering InformationAbsolute Maximum RatingsThermal Resistance RatingsSpecificationsTypical CharacteristicsThermal RatingsPackage Information SQD40P10-40L_GE3 DatasheetSQD40P10-40L_GE3 ManufacturerSQD40P10-40L_GE3 FAQ FeaturesHalogen-free According to IEC  61249-2-21 DefinitionTrenchFET® Power MOSFETPackage with Low Thermal ResistanceAEC-Q101 Qualifiedd100 % Rg and UIS TestedCompliant to RoHS Directive  2002/95/EC Product SummaryVDS (V)-100RDS(on) (Ω) at VGS = - 10 V0.04RDS(on) (Ω) at VGS = - 4.5 V0.048ID (A)-38ConfigurationSingle Ordering InformationPackageTO-252Lead (Pb)-free and Halogen-freeSQD40P10-40L-GE3 Absolute Maximum Ratings (TC = 25 °C, unless otherwise noted)PARAMETERSYMBOLLIMITUNITDrain-Source VoltageVDS-100VGate-Source VoltageVGS± 20Continuous Drain CurrentTC = 25 °CID-38ATC = 125 °C-22Continuous Source Current (Diode Conduction)aIS-50Pulsed Drain CurrentbIDM-150Single Pulse Avalanche CurrentL = 0.1 mHIAS-44Single Pulse Avalanche EnergyEAS96mJMaximum Power DissipationbTC = 25 °CPD136WTC = 125 °C45Operating Junction and Storage Temperature RangeTJ, Tstg- 55 to + 175°C Thermal Resistance RatingsPARAMETERSYMBOLLIMITUNITJunction-to-AmbientPCB MountcRthJA50°C/WJunction-to-Case (Drain)RthJC1.1 Notesa.Package limited.b.Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.c.When mounted on 1" square PCB (FR-4 material).d.Parametric verification ongoing. Specifications (TC = 25 °C, unless otherwise noted)PARAMETERSYMBOLTEST CONDITIONSMIN.TYP.MAX.UNITStaticDrain-Source Breakdown VoltageVDSVGS = 0 V, ID = - 250 μA-100--VGate-Source Threshold VoltageVGS(th)VDS = VGS, ID = - 250 μA-1-2-2.5Gate-Source LeakageIGSSVDS = 0 V, VGS = ± 20 V--± 100nAZero Gate Voltage Drain CurrentIDSSVGS = 0 VVDS = - 100 V---1μAVGS = 0 VVDS = - 100 V, TJ = 125 °C---50VGS = 0 VVDS = - 100 V, TJ = 175 °C---250On-State Drain CurrentaID(on)VGS = - 10 VVDS ≤ - 5 V-30--ADrain-Source On-State ResistanceaRDS(on)VGS = - 10 VID = - 9.2 A-0.0330.04ΩVGS = - 10 VID = - 9.2 A, TJ = 125 °C--0.074VGS = - 10 VID = - 9.2 A, TJ = 175 °C--0.093VGS = - 4.5 VID = - 7.7 A-0.0370.048Forward TransconductancebgfsVDS = - 15 V, ID = - 9.2 A-35-SDynamicbInput CapacitanceCissVGS = 0 VVDS = - 25 V, f = 1 MHz-44335545pFOutput CapacitanceCoss-301380Reverse Transfer CapacitanceCrss-208260Total Gate ChargecQgVGS = - 10 VVDS = - 50V, ID = - 9.2 A-96144nCGate-Source ChargecQgs-8.4-Gate-Drain ChargecQgd-23.5-Gate ResistanceRgf = 1 MHz1.53.134.7ΩTurn-On Delay Timectd(on)VDD = - 50 V, RL = 6.49 ΩID ≌ - 7.7 A, VGEN = - 10 V, Rg = 1.0 Ω-1117nsRise Timectr-1117Turn-Off Delay Timectd(off)-78117Fall Timectf-1523Source-Drain Diode Ratings and CharacteristicsbPulsed CurrentaISM ---150AForward VoltageVSDIF = - 7.7 A, VGS = 0 V--0.8-1.5V Notesa.Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %.b.Guaranteed by design, not subject to production testing.c.Independent of operating temperature. Typical Characteristics (TA = 25 °C, unless otherwise noted)Figure: Output Characteristics  Figure: Transfer Characteristics   Figure: Transconductance   Figure: On-Resistance vs. Drain Current   Figure: Capacitance   Figure: Gate Charge   Figure: On-Resistance vs. Junction Temperature   Figure: Source Drain Diode Forward Voltage   Figure: On-Resistance vs. Gate-to-Source Voltage   Figure: Threshold Voltage   Figure: Drain Source Breakdown vs. Junction Temperature Thermal Ratings (TA = 25 °C, unless otherwise noted) Figure: Safe Operating Area Package Information Figure: TO-252AA Case Outline MILLIMETERSINCHESDIM.MIN.MAX.MIN.MAX.A2.182.380.0860.094A1-0.127-0.005b0.640.880.0250.035b20.761.140.030.045b34.955.460.1950.215C0.460.610.0180.024C20.460.890.0180.035D5.976.220.2350.245D14.1-0.161-E6.356.730.250.265E14.32-0.17-H9.410.410.370.41e2.28 BSC0.090 BSCe14.56 BSC0.180 BSCL1.41.780.0550.07L30.891.270.0350.05L4-1.02-0.04L51.011.520.040.06 SQD40P10-40L_GE3 DatasheetYou can download the datasheet from the link given below:SQD40P10-40L_GE3 Datasheet SQD40P10-40L_GE3 ManufacturerVishay Intertechnology, Inc. is an American manufacturer of discrete semiconductors and passive electronic components founded by Polish-born businessman Felix Zandman. Vishay has manufacturing plants in Israel, Asia, Europe, and the Americas where it produces rectifiers, diodes, MOSFETs, optoelectronics, selected integrated circuits, resistors, capacitors, and inductors. Vishay Intertechnology revenues for 2018 were $3.035 billion. As of December 31, 2018, Vishay Intertechnology had approximately 24,100 full-time employees. SQD40P10-40L_GE3 FAQWhat is P-channel Mosfet used for?P-channel MOSFETs are often used for load switching. The simplicity of P-channel solutions on the high side makes them equally attractive for applications such as Low-Voltage Drives and non-isolated Point of Loads in systems where space is at a premium. Which Mosfet is faster N-channel or P-channel?The mobility of electrons, which are carriers in the case of an n-channel device, is greater than that of holes, which are the carriers in the p-channel device. Thus an n-channel device is faster than a p-channel device. Where are MOSFETs used?Power MOSFETs are commonly used in automotive electronics, particularly as switching devices in electronic control units, and as power converters in modern electric vehicles. The insulated-gate bipolar transistor (IGBT), a hybrid MOS-bipolar transistor, is also used for a wide variety of applications. 
Kynix On 2021-12-18   333
Discrete Semiconductor Products

FSV20150V Ultra-Low VF Schottky Rectifier

CatalogFeaturesMarking DiagramAbsolute Maximum RatingsThermal CharacteristicsElectrical CharacteristicsOrdering InformationTypical Performance CharacteristicsMechanical Case OutlineFSV20150V DatasheetFSV20150V ManufacturerFSV20150V FAQFeaturesUltra−Low Forward Voltage DropLow Thermal ResistanceVery Low Profile: Typical Height of 1.1 mmTrench Schottky TechnologyGreen Molding Compound as per IEC61249 StandardNon−DAP Option OnlyThese Devices are Pb−Free, Halogen Free and areRoHS Compliant Marking Diagram$Y = ON Semiconductor Logo&Z = Assembly Plant Code&3 = Date Code (Year & Week)FSV20150V = Specific Device Code Absolute Maximum Ratings (TA = 25℃ unless otherwise noted)SymbolParameterValueUnitVRRMPeak Repetitive Reverse Voltage150VVRWMWorking Peak Reverse Voltage150VVRMSRMS Reverse Voltage106VVRDC Blocking Voltage150VIF(AV)Average Rectified Peak Forward Surge Current20AIFSMNon−Repetitive Peak Forward Surge Current270ATJOperating Junction Temperature Range−55 to +150°CTSTGStorage Temperature Range−55 to +150°C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Thermal Characteristics(TA = 25℃ unless otherwise noted)SymbolParameterMinimum Land PatternMaximum Land PatternUnitRθJAJunction−to−Ambient Thermal Resistance10040℃/WΨJLJunction−to−Lead Thermal Characteristics, Thermocouple Soldered to Anode1512℃/WJunction−to−Lead Thermal Characteristics, Thermocouple Soldered to Cathode65 The thermal resistances (RθJA & ΨJL) are characterized with device mounted on the following FR4 printed circuit boards, as shown in Figure 1 and Figure 2. PCB size: 76.2 x 114.3 mm. Minimum land pattern size: 4.9 x 4.8 mm (big pattern, x1), 1.4 x 1.52 mm (small pattern, x2). Maximum land pattern size: 30 x 30 mm (pattern, x2). Force line trace size = 55 mils, sense line trace size = 4 mils. Figure 1. Minimum Land Pattern of 2 oz Copper   Figure 2. Maximum Land Pattern of 2 oz Copper Electrical Characteristics (TA = 25℃ unless otherwise noted)SymbolParameterConditionsMinMaxUnitBVRBreakdown VoltageIR = 0.5 mA150−VVFForward Voltage DropIF = 20 A−0.84VIRReverse CurrentVR = 150 V−30µA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Ordering InformationPart NumberTop MarkPackageShipping†FSV20150VFSV20150VTO−277 3L                        (Pb−Free/Halogen Free)5000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Typical Performance CharacteristicsFigure 3. Typical Forward Characteristics  Figure 4. Typical Reverse Characteristics  Figure 5. Typical Junction Capacitance  Figure 6. Forward Current Derating Curve Mechanical Case Outline FSV20150V DatasheetFSV20150V Datasheet FSV20150V ManufacturerOnsemi is driving energy efficient innovations, empowering customers to reduce global energy use. The company offers a comprehensive portfolio of energy efficient power and signal management, logic, discrete and custom solutions to help design engineers solve their unique design challenges in automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power supply applications. onsemi operates a responsive, reliable, world-class supply chain and quality program, and a network of manufacturing facilities, sales offices and design centers in key markets throughout North America, Europe, and the Asia Pacific regions. FSV20150V FAQWhat are FSV Ultra-Low VF Schottky Rectifiers?onsemi / Fairchild FSV Ultra-Low VF Schottky Rectifiers are ultra-low forward voltage drop rectifiers with low thermal resistance. They feature a low profile with a typical height of 1.1mm and are RoHS compliant. The onsemi / Fairchild FSV Rectifiers are Green Molding Compounds as per the IEC61249 Standard, lead-free in compliance with EU RoHS 2011/65/EU Directive, and qualified per AEC-Q101 Rev. C Standard. What is a Schottky rectifier used for?Schottky diodes are used for their low turn-on voltage, fast recovery time and low-loss energy at higher frequencies. These characteristics make Schottky diodes capable of rectifying a current by facilitating a quick transition from conducting to blocking state. Which metal is used in Schottky diode?A metal-semiconductor junction is formed between a metal and a semiconductor, creating a Schottky barrier instead of a semiconductor-semiconductor junction as in conventional diodes. The semiconductor would typically be N-type silicon and typical metals used are molybdenum, platinum, chromium or tungsten. 
Kynix On 2021-12-17   260

Kynix

Kynix was founded in 2008, specializing in the electronic components distribution business. We adhere to honesty and ethics as our business philosophy and have gradually established an excellent reputation and credibility in our international business. With the accurate quotation, excellent credit, reasonable price, reliable quality, fast delivery, and authentic service, we have won the praise of the majority of customers.

Follow us

Join our mailing list!

Be the first to know about new products, special offers, and more.

Kynix

  • How to purchase

  • Order
  • Search & Inquiry
  • Shipping & Tracking
  • Payment Methods
  • Contact Us

  • Tel: 00852-6915 1330
  • Email: info@kynix.com
  • Follow Us

authentication

Kynix

© 2008-2026 kynix.com all rights reserve.