ti Related Articles

Ⅰ Introduction What exactly is a microprocessor? As our lives are becoming increasingly tech-centric and thus tech-dependent,  we have to examine this critical component closely. After all, microprocessors are built into computers, laptops, and smartphones, as well as smart home devices, gaming consoles, and self-driving cars. Microprocessors are what allow these devices to function. In this blog, we will discuss microprocessor basics and their applications across industries. Catalog Ⅰ Introduction Ⅱ What is a Microprocessor? Ⅲ Microprocessor Related Video: Ⅳ Features of Microprocessor Ⅴ Evolution of Microprocessors  Ⅵ Microprocessor Types Ⅶ Characteristics of CISC and RISC  Ⅷ Differences Between CISC and RISC Ⅸ Applications of Microprocessor 9.1 Practical Diagram Examples Ⅹ Microprocessor vs. Integrated Circuit--What’s the Difference? Ⅺ FAQ   Ⅱ What is a Microprocessor? A microprocessor is a Central Processing Unit (CPU) built on a single  Integrated Circuit  (IC) in a computer. A microcomputer is a digital computer with one microprocessor that serves as the CPU. It is a programmable, multipurpose, clock-driven, register-based electronic device that reads binary instructions from memory, accepts binary data as input, processes data according to those instructions, and outputs the results. The microprocessor is composed of millions of tiny components that work together, such as transistors, registers, and diodes. Figure1：Block Diagram of a Microcomputer  A microprocessor contains three parts: an  ALU , a control unit, and a register array. The  ALU performs arithmetic and logical operations on data from an input device or memory. The control unit manages the computer's instructions and data flow. Furthermore, a register array is composed of registers denoted by letters such as B, C, D, E, H, L, and accumulator.   Ⅲ Microprocessor Related Video: How to easily use HMC5883L Compass Sensor Microprocessor Video Description: In this video, we will understand the difference between microprocessor and microcontroller. Visually both microprocessor and microcontroller almost look identical but they are different in many aspects. They are different in terms of the application in which they are used, processing power, memory, cost and power consumption. So, in this video, you will understand the difference between microprocessor and microcontroller in all these aspects. Ⅳ Features of Microprocessor   Ⅴ Evolution of Microprocessors  We can classify microprocessors based on generation or size: First Generation (4 - bit Microprocessors  ) Intel Corporation introduced the first generation of microprocessors in 1971-1972. Because it was a 4-bit processor, it was dubbed the  Intel 4004 . It was a single-chip processor. It was capable of performing basic arithmetic and logical operations such as addition, subtraction, Boolean OR, and Boolean AND. I had a control unit that could fetch an instruction from storage memory, decode it, and then generate control pulses to execute it. Second Generation (8 - bit Microprocessor) Intel introduced the second generation of microprocessors in 1973. It was the first eight-bit microprocessor capable of performing arithmetic and logic operations on 8-bit words. It was known as the  Intel 8008 , and an improved version was known as the  Intel 8088 . Third Generation (16 - bit Microprocessor) The third generation microprocessors, introduced in 1978, were Intel's 8086, Zilog Z800, and 80286, which were 16-bit processors with minicomputer-like performance. Fourth Generation (32 - bit Microprocessors  ) The 32-bit microprocessor was introduced by several companies, but the most popular is the Intel 80386. Fifth Generation (64 - bit Microprocessors) From 1995 to the present, we have been in the fifth generation. Following 80856, Intel released a new processor, the  Pentium  processor, followed by the  Pentium Pro CPU.  which enables multiple CPU  s in a single system to achieve multiprocessing. Celeron, Dual, Quad, and Octa-Core processors are also improved, 64-bit processors.   Ⅵ Microprocessor Types Microprocessors are classified into three types: CISC (Complex Instruction Set Computer) The instructions are in a complex format, as the name implies. This means that a single instruction can contain several low-level instructions. Loading data from memory, storing data in memory, performing basic operations, and so on. Furthermore, a single instruction can have multiple addressing modes. Furthermore, because there are many operations in a single instruction, they use a small number of registers. Intel 386,  Intel 486 , Pentium, Pentium Pro, Pentium II, and other  CISC  processors are examples. RISC (Reduced Instruction Set Computer) As the name implies, the instructions in this are quite simple, and thus they execute quickly. Furthermore, the instructions are completed in a single clock cycle and only use a few addressing modes. Furthermore, it employs multiple registers, resulting in less interaction with memory. Examples include the IBM RS6000, DEC Alpha 21064, DEC Alpha 21164, and others. EPIC (Explicitly Parallel Instruction Computing) It enables parallel computation of instructions through the use of compilers. Furthermore, the complex instructions operate at lower clock frequencies. It also encodes the instructions in 128-bit bundles. Each bundle contains three instructions encoded in 41 bits each, as well as a five-bit template. This 5-bit template specifies the type of instructions and which instructions can be executed concurrently.   Ⅶ Characteristics of CISC and RISC  Characteristics of  CISC are as follows: Because the instructions are complex, so is the decoding of instructions.The size of instructions is larger than the size of a single word.It is possible for an instruction to take more than one clock cycle to execute.Because most operations are performed in memory, the number of registers is reduced.Address modes are also complicated.There are more data types. Characteristics of  RISC are as follows: Because the instruction is simple, so is the decoding of instructions.The size of the instructions is less than one word.It takes one clock cycle to execute an instruction.The number of registers has increased.The address modes are also straightforward.There are fewer data types.It has the potential to be used for pipelining.   Ⅷ Differences Between CISC and RISC RISCCISCIt focuses on the software.It focuses on the hardware.Uses the hardwired control unit.It uses a hardwired as well as a microprogrammed control unit.Uses transistors for more registers.Transistors are used for storing the complex instructions.The instructions have a fixed size.The size of instructions vary.It performs only register to register arithmetic operations.Besides the register to register operations, it can also perform register to memory or memory to register operations.Fewer registers are used.It requires more number of registers.As the instructions are individual the code is large.Multiple operations are present in single instruction hence, the code is small.Executes in one clock cycle.Takes more than one clock cycle for execution.Instructions have a size of one word.The size of instructions is greater than the one-word size.Examples are IBM RS6000, DEC Alpha 21064, DEC Alpha 21164, etc.Examples of CISC are Intel 386, Intel 486, Pentium, Pentium Pro, Pentium II, etc.     Ⅸ Applications of Microprocessor Household DevicesIndustrial Applications of MicroprocessorsTransportation IndustryComputers and ElectronicsIn MedicalsInstrumentationEntertainmentEmbedded Systems at HomeOffice Automation and PublicationCommunication   9.1 Practical Diagram Examples As stated by the term microprocessor typically refers to a microcomputer's central processing unit (CPU), which contains the arithmetic logic unit (ALU) and control units. Typically, it is implemented on a single LSI chip. This separates the operation's "brains" from the rest of the computer's units.   An example of microprocessor architecture The arithmetic logic unit (ALU) and the control unit for a microcomputer are housed in the microprocessor. It is linked to memory and I/O via buses, which transport data between the units. Figure2: microprocessor architecture     Microcomputer Example A microprocessor unit (MPU), a clock, and interfaces to memory and external input/output devices are typical components of a microcomputer. The units are linked by buses that transfer data between them. Figure3: Microcomputer   Buses: The exchange of information Information is transferred between microcomputer units via buses, which are groups of conductors. Each bit of information to be passed will have one conductor, e.g., 16 lines for a 16-bit address bus. Address, control, and data buses will be present.   Figure4: microcomputer units via buses     Ⅹ Microprocessor vs. Integrated Circuit--What’s the Difference? Integrated Circuit An integrated circuit is a semiconductor chip component that contains thousands to billions of transistors. It's difficult to imagine how this is possible, but it's not done by shrinking scores of typical 3-legged NPN transistors. An integrated circuit is instead constructed by assembling the basic structure of MOS transistors on a small piece of the silicon wafer. The MOS transistors are connected in such a way that they perform the same function as a larger setup.    Microprocessor An integrated circuit is a microprocessor, but not all integrated circuits are microprocessors. The microprocessor, like Professor X, is an intelligent piece of integrated circuits. It serves as the brain of circuits that require computing power. The first microprocessors had thousands of transistors on a silicon wafer, but the number has now reached billions. The  AMD  Epyc Rome chip, which was released in 2019, contains over 39 billion transistors. A microprocessor, unlike other integrated circuits, serves as a computing brain. It can execute logical and arithmetic instructions that have been programmed into it. A microprocessor is made up of three parts: an arithmetic and logic unit (ALU), a control unit.  and a register array.   Microprocessor vs. Integrated Circuit in Electronics Design Figure5: Mind the speed when working with a microprocessor. In electronics design, you're likely to work with integrated circuits. Working with a microprocessor can be a herculean task on occasion. It's a mistake to think that designing with a microprocessor is the same as designing with traditional integrated circuits. If you skip a couple of best practices in PCB design, you can still create a successful design if you're working with common ICs like differential transceivers or logic gates. In terms of power supply and speed, these passive ICs are typically quite robust. However, if you make the same mistakes in a design with a microprocessor, you will almost certainly encounter a slew of problems in the prototype. Microprocessors are notoriously power-hungry devices that typically operate at hundreds of Hertz or Gigahertz. It should go without saying that a microprocessor is extremely sensitive to the voltage applied to it. Ripples or a sudden drop in voltage can have a significant impact on the microprocessor's stability. Because the microprocessor communicates with memory via high-speed data buses, EMI is also a concern. High-speed data exchange can be a source of EMI, affecting nearby sensitive components. When designing with a microprocessor, you can't afford to make even the smallest mistake, so using the right PCB design and analysis software is essential. Cadence OrCAD supports high-speed signal simulation to identify problems early in the design process, as well as a plethora of other tools to help you get the job done right the first time.   Ⅺ FAQ 1. What is microprocessor in simple terms? A microprocessor is an electronic component that is used by a computer to do its work. It is a central processing unit on a single integrated circuit chip containing millions of very small components including transistors, resistors, and diodes that work together. 2. Are microprocessors used today? One or more microprocessors are used today in everything from the smallest embedded systems and handheld devices to the largest mainframes and supercomputers. 3. Are microprocessors in phones? Smartphones and other mobile devices have multiple microprocessors and microcontrollers. The main processor is a microprocessor with a bus to communicate with memory on separate chips (although often included in the same IC package) and buses to communicate with the rest of the equipment. 4. Do phones have RAM? Android phones have jumped from 4GB to 8GB RAM as standard, and we're now seeing phones with 12GB and 16GB of RAM — but Apple's iPhone has always gotten by with less. 5. How do microprocessors execute instructions? The instructions which are to be executed by microprocessor are first stored in the memory of the processor and then executed. But the processor does not execute the instructions directly. It reads the instruction byte by byte and then executes it. 6. What is microprocessor chips? Microprocessor chips (MPU) are silicon devices that serve as the central processing unit (CPU) in computers. They contain thousands of electronic components and use a collection of machine instructions to perform mathematical operations and move data from one memory location to another.

ⅠIntroduction This project mainly introduces how to DIY a Simple Audio Player with  Amplifier LM386 . But before this project, it is very essential to know some basics of LM386. Therefore, the first of this article is about LM386 audio amplifiers and the second part we will have a look at the practical appliance of Simple Audio Player with Amplifier LM386. Catalog ⅠIntroduction Ⅱ Amplifier LM386 Related Video: Ⅲ LM386 Basics 3.1 LM386 Datasheet 3.2 LM386 Pinout 3.3 LM386 Features Ⅳ  Project Introduction 4.1 Hardware Required 4.2 Getting Ready with Your WAV Audio Files: 4.3 Circuit 4.4 Code 4.5 Working of this Arduino Music Player: Ⅴ FAQ How to make an LM386 audio amplifier circuit Amplifier LM386 Video Description: In this Video, We will explore how to use the popular LM386 class AB audio amplifier IC to build a simple mono 1 watt audio amplifier.  Ⅲ LM386 Basics Despite the fact that LM386 audio amplifiers are quite old. They do, however, have a lot of useful information. Assume your audio player has poor sound quality. You want to boost the volume. They are a good option. Because of the low voltage supply and the fact that it works well with a battery.   3.1 LM386 Datasheet You completed an audio circuit  . However, the sound is too faint. Many people use the LM386 to boost the sound to a speaker. The LM386 is a low-power audio amplifier. Also, you should be able to work with a battery,  It has a similar shape to  IC-741  and DIP-8. So, small and simple. Even if it's small, it makes a big sound. But...better. it's If you have previously read the LM386 Datasheet.   3.2 LM386 Pinout Figure1:pinout In DIP-8, we frequently use the LM386. There are only a few pin connections. Other packets are also the same. For example, SOP-8, TSSOP-8, and so on.   3.3 LM386 Features   Ⅳ  Project Introduction Including sounds or music in our project will always make it look and sound much more appealing. If you're working with an  Arduino  and have a lot of free spins, you can easily add sound effects to your project by purchasing an extra SD card module and a standard speaker. In this article, I'll show you how to play music and add sound effects with your  Arduino board, as well as introduce the IC LM386 Amplifier  , which we'll use in this process. We will play the.wav music files stored on an SD card in this project. The Arduino will be programmed to read these.wav files and play the audio on a speak through an LM386 Audio amplifier.   Figure2: Project     4.1 Hardware Required Arduino Due Board8-ohm speaker or headphonesArduino shield with an SD card with cs CS 4 (like the Ethernet shield)Components to build an external audio amplifierLM386 (low power audio amplifier)10 kohm potentiometer10 ohm resistor2 x 10 µF capacitor0.05 µF (or 0.1 µF) capacitor250 µF capacitor   4.2 Getting Ready with Your WAV Audio Files: The audio file to be stored on the SD card must be in.wav format and have 44100 Hz, 16-bit stereo quality. We need audio files in.wav format to play sounds from an SD card using Arduino because the Arduino Board can only play audio files in a specific format, which is wav format. There are many mp3 shields available for use with Arduino to create an Arduino mp3 player. Alternatively, to play mp3 files in Arduino, there are websites that will convert any audio file on your computer into that specific WAV file.   4.3 Circuit The shield is placed on top of the Due, and a micro-SD card is inserted into the slot. The card's root directory contains a.wav file called "test.wav." For a quick test, connect a pair of headphones to the ground and DAC0 while keeping the polarity in mind. To add a speaker to the board, connect an amplification circuit between the DAC0 pin and the speaker. The amplification circuit will boost the speaker's volume,  There are numerous audio amplifiers available, with the LM386 being one of the most common. The following scheme demonstrates how to construct the circuit using the LM386 and a variety of components. You can power the LM386 by connecting the Vs pin to various voltage sources, such as the +5 V on the Arduino Due's 5V pin or an external 9V  battery,  The capacitor is connected to pins 1 and 8 of the LM386 provides the amplifier's gain. The gain is set to 200 with the 10 F capacitor, and 50 without the capacitor. The volume of the amplifier can be adjusted using the potentiometer. Caution: Do not connect the speaker directly to the Arduino Due's pins.   Figure3 : Circuit   Figure4: LM386 mounting on breadboard   4.4 Code   4.5 Working of this Arduino Music Player: Simply press the button connected to pin 2 after programming your Arduino, and your Arduino will play the first song (saved as 1.wav) for you. You can now press the button again to change your track to the next song, 2.wav. Similarly, you can listen to all four songs. You can also play/pause the song by pressing the pin 3 button. Press it once to pause the song and once more to resume it from where it left off. Watch the video below to see the entire process in action (or maybe to relax with some songs). I hope you had a good time with the project. It is now up to your imagination to incorporate them into your projects. You can create a speaking clock, voice assistant, talking robot, voice alert security system, and many other things.   Ⅴ FAQ 1. How many watts is LM386? 700mW, mono, 5- to 18-V, analog input Class-AB audio amplifier. 2. How do you calculate LM386 gain? Voltage Gain Analysis: Without any external components, it has a gain of Gv = 2x15K/(150+1350) = 20 (26 dB). With a capacitor (or shortcutting) between pins 1 and 8 , it has a gain of Gv = 2x15K/150 =200 (46dB). 3. Is LM386 any good? The LM386 is a well-designed, basic workhorse that does a decent job when its hooves are kept clean and it's well-fed. Aside from having a slow op-amp stage by today's standards, it has decent performance. It can also sound horrible if you neglect it. 4. What is an audio amplifier circuit? The circuit of the audio amplifier consists of a transistor a device to apply the input signals and a speaker at the output. The transistors are connected based on the necessity. The important factors that need to be considered while designing a audio amplifier is gain,noise, frequency response and distortion. 5. Which amplifier can be used for audio amplifier? An audio power amplifier (or power amp) is an electronic amplifier that amplifies low-power electronic audio signals such as the signal from radio receiver or electric guitar pickup to a level that is high enough for driving loudspeakers or headphones. 6. What is the need of power amplifier? The function of a power amplifier is to raise the power level of input signal. It is required to deliver a large amount of power and has to handle large current. The characteristics of a power amplifier are as follows − The base of transistor is made thicken to handle large currents.

IntroductionNow face masks are necessary elements during the COVID. In practice, they are intended for one-time use, and to a large extent, it is environment unfriendly. Also during a shortage, repeated use is inevitable and it is necessary to have a disinfection mechanism. During the ongoing SARS-CoV-2 pandemic, hospitals, medical centers, and research institutions implemented different disinfection methods for these masks, usually involving ultraviolet germicidal exposure (UVGI) or some kind of heating methods. Nevertheless, these methods are not suitable for many ordinary people. What’s more, due to shortages, the reuse of these masks has become the only option. There is evidence that SARS-CoV-2 still exists on the surface of surgical masks even after 7 days, so the demand for feasible mask disinfection methods has further increased. Here will introduce a special device to do that.Introduction: Understanding the CoronavirusCatalogIntroductionⅠ Disinfection Device Production InstructionsⅡ Device Design Processes2.1 Device Size2.2 Thermal Test2.3 Box Lid Design2.4 UV-C System2.5 Making the Mask PlacementⅢ Set Up Arduino and Sensor3.1 Arduino Overview3.2 Material3.3 Sensors Installation3.4 Arduino Control3.5 AlarmⅣ Using GuideⅤ Temperature Cycle5.1 Heat Inactivation of Viruses5.2 Security ConsiderationsⅥ ConclusionⅠ Disinfection Device Production InstructionsThe device aims to create a low-cost portable device that can effectively use UVGI and dry heat to disinfect masks carry SARS-CoV virions, and can be easily operated by those who need it.Device Setup DiagramFigure 1. Device Setup Diagram1) The temperature must be kept within 65±5℃.2) The lamp must provide UV-C wavelength. UVC bulbs that emit very short ultraviolet wavelengths from 100 to 280 nanometers that damages the DNA of bacteria, viruses, and other pathogens. You should be careful, ultraviolet C is the most dangerous type of ultraviolet light in terms of its potential to harm life on earth.3) The duration of the disinfection cycle is at least 30 minutes. Because coronavirus is more sensitive to heat. A temperature of 56 degrees can kill the coronavirus within 30 minutes. So no more than 30 minutes to avoid potential mask degradation and function losses.Figure 2. Device Operational DisplayFigure 3. Device Physical ViewⅡ Device Design Processes2.1 Device SizeFigure 4. Device Size2.2 Thermal TestFigure 5. Thermal Test DiagramFigure 6. Test with ThermometerFigure 7. Test Boite Temperature Manufacturing of heating system:1) A frying pan with a diameter of 22cm (induction compatible) without handle.2) Cover the frying pan with aluminum foil to reflect UV-C light.3) Make a 20cm hole in the center of the bottom surface of the box.4) In order to maintain the position of the frying pan, please use four metal brackets as shown in the figure.Figure 8. Frying PanNote: The frying pan should not close to the wood of the box because it will reduce the thermal efficiency. Therefore, you must select the appropriate hole diameter and shape the metal bracket according to the following figure:Figure 9. Frying Pan Installation Diagram 2.3 Box Lid DesignFigure 10. Box Lid Design2.4 UV-C SystemFigure 11. UV-C LampFor the UV-C source in this device, it is an 11W bulb from household aquarium. As shown in the picture, the UV-C bulb is taken out and installed on the top cove. The installation method of the bulb is to make 4 holes in the top cover, and use the cable tie/cable tie and soft cushion to fix the bulb firmly. And the top surface is covered with aluminum to reflect ultraviolet radiation.You can feel free to use UV-C lamps from other sources. However, if you cannot access the crystal tube (used in this project), please do not use glass as a substitute, because glass will block ultraviolet radiation.2.5 Making the Mask PlacementThe mask will be placed on top of the metal frame. The I wire frame is made of thin copper wires, and each wire has 30mm spacing apart. The wire stand is located 120mm above the bottom surface. Next secure the wire racks together by passing the wires through the small holes on the front and back surfaces of the box.Figure 12. Mask PlacementⅢ Set Up Arduino and Sensor3.1 Arduino OverviewFigure 13. Arduino Overview3.2 MaterialArduino UNO Rev3Grove Basic Shield V2, 0Infrared temperature sensorLight SensorPush ButtonPiezo SpeakersFour-digit LED DisplayAdapter power supply DC 12V3.3 Sensors InstallationFigure 14. Sensor Introduction3.4 Arduino ControlINIT: In this state, the LED display indicates the temperature, but you have to wait for it to reach the threshold (70℃) before starting cycle counting in the COUNT state.Count: The number of minutes from 30 to 0 is displayed on the LED display next to the temperature digits. Additionally, in the case of too low temperature, or if the UV lamp is turned off, the status will change to ERR.END: This is the normal state at the end of the elapsed time. The speaker will remind. Press the button to enter INIT again.ERR: This is an error state, if the temperature is too low or the UV lamp is turned off, it will run. In terms of it, repeat the last step above.Code Download: LED Backpack Libraries and Arduino Wiring.3.5 AlarmIn fact, there are few alarm conditions. If the alarm is on, there will be a specific sequence on the speaker and a message will be displayed on the screen.Alarm condition: If the system is in ERR state (mentioned above) or the temperature is too high (over 75℃).Figure 15. Alarm System Diagram Ⅳ Using Guide1) Put the box on top of the induction (or resistance) stove.2) Turn on the power of Arduino.3) Close the box and start heating at 70~80% of the power of the induction cooker.4) Wait until the temperature reaches 60℃, and then reduce the variable power of the induction cooker to 30%.5) Now you can open the device, put the mask in and close it.7) Press the button to start, the remaining time (30 minutes) should be displayed.8) From now on, you need to wait 30 minutes, and there will be a signal on the speaker.9) If you want to restart a new cycle from the initial state, just press the button.Note: When the timer is counting the elapsed time, the dots between the Timer and Temperature displays will flash at 1 second intervals. Ⅴ Temperature CycleFigure 16. First Heat CycleFigure 17. Cycle with Opening-Closing 5.1 Heat Inactivation of VirusesSince the time of Pasteur, people have known the ability to remove microorganisms through moist heat, usually below 100℃. In this device, we implemented dry heat, which is reported to be effective in eliminating the infectivity of SARS-CoV. The analysis showed that the virus is largely inactivated within 30-90 minutes at 56℃, almost completely inactivated at 65℃ in 20-60 minutes, and at 75℃ in 30-45 minutes. In addition, a recent study showed that SARS-CoV-2 will lose all its infectivity at 56℃ after 30 minutes or at 70℃ after 5 minutes.According to these evidences and additional considerations regarding the effects of these disinfection methods on the function of the mask, we decided to set the heat exposure of the protocol used with the equipment to 65℃/30 minutes.5.2 Security Considerations• UVC radiation is harmful to human skin and eyes, so the UVC bulb should only be turned on when the box is completely closed.• Be careful with the metal parts of the box, they may be very hot after heating and may burn your skin when you touch them directly. Ⅵ ConclusionTaking into account the collected evidence and the technical details of the equipment, we decided to set the disinfection protocol to UVC irradiation for 30 minutes and 65±5℃ dry heat. In addition, the time required for the device should reach the required temperature and light intensity, which must be calculated. Using these specifications of UVC or heating alone should be sufficient to eliminate almost all SARS-CoV-2 infectivity, and the simultaneous action of the two should increase the effectiveness to reach a safer level.According to the available scientific evidence, the disinfection program may eliminate almost all SARS-CoV infectivity and will certainly make the masks safer to reuse than without any disinfection. However, it is designed in good faith and to the best of professional knowledge and ability, but the following must be stated:The use of this equipment to inactivate SARS-CoV-2 has not yet undergone proper laboratory testing, and it is impossible to confidently confirm the actual impact on the filtering capacity of the mask in advance.

ⅠIntroduction RTC is an abbreviation for Real-Time Clock. RTC modules are simply TIME and DATE remembering systems with a battery setup that keeps the module running in the absence of external power. This keeps the TIME and DATE current. As a result, we can get accurate TIME and DATE from the RTC module whenever we want. Catalog ⅠIntroduction Ⅱ RTC Module Explaintion 1.1 What is RTC module？ 1.2 Timing Ⅲ DS1302 RTC Module Basics 3.1 DS1302 RTC Module Pinout 3.2 DS1302 Pin Configuration 3.3 Features 3.4 Technical Specifications  3.5 Block Diagram of DS1302 RTC Chip Ⅳ DS1302 RTC Module with Arduino 4.1 Setting up the Hardware 4.2 Making the Code Ⅴ FAQ   Ⅱ RTC Module Explaintion 1.1 What is RTC module？ A real-time clock (RTC) is an electronic device that measures the passage of time (typically in the form of an integrated circuit). Although the term is most commonly associated with devices found in personal computers, servers, and embedded systems, RTCs can be found in almost any electronic device that requires an accurate time of day. A real-time clock mechanism and a long-lasting battery are used by an RTC module to keep track of the time. On a small board with five pins, the module contains a 3V lithium-ion battery, a 32 kHz crystal, and a DS1302 chip. The DS1302 chip is extremely power efficient and can run for up to 5 years on a 3V lithium battery. Figure1:RTC Module     The power supply voltage  is 5 volts. The serial  I2C  communication protocol is used by the RTC module.  which makes interfacing with the microcontroller very simple. Aside from VCC and GND, only two pins (CLK and DAT) are required for interfacing with  Arduino . CLK and DAT are the required SCL and SDA pins for  I2C communication, respectively, while RST is the reset pin (optional).   1.2 Timing The majority of RTCs use a crystal oscillator,[8][9] but some can use the power line frequency.  The crystal frequency is typically 32.768 kHz, which is also the frequency used in quartz clocks and watches. It is a convenient rate to use with simple binary counter circuits because it is exactly 215 cycles per second. The low frequency saves power while remaining above the range of human hearing. The temperature has little effect on the size of these crystals' quartz tuning forks, so the temperature has little effect on their frequency. Some RTCs employ a micromechanical resonator on the RTC's silicon chip. This reduces the size and cost of an RTC by reducing the number of parts. Micromechanical resonators are much more temperature-sensitive than quartz resonators. So, using an electronic thermometer and electronic logic, compensate for temperature changes. Typical crystal RTC accuracy specifications range from 100 to 20 parts per million (8.6 to 1.7 seconds per day), but temperature-compensated RTC ICs are available with accuracy as low as 5 parts per million. In practice, this is adequate for celestial navigation, the traditional function of a chronometer. Chip-scale atomic clocks became available in 2011. Despite being significantly more expensive and power-hungry (120 mW vs. 1 W), they keep time to within 50 parts per trillion.   Ⅱ RTC Module Related Video: What is RTC and how it is working || real time clock|| diyproject || graspelectronics RTC Module Video Description: what is rtc ? and how it is working ? RTC stands for real tme clock. RTC module code  is ds3231 the code is given in the datasheet for all components  . it is work in 3.3v  5v may kill the module. it is used to maintain accurate time keeping when main power to the device is interrupted. The rtc maintan maintains second,hours, day,date, month and year information. Real time clockThe date at end of the month is automatically adjusted for month with fewer then 31 days including corrections for leap years.   Ⅲ DS1302 RTC Module Basics Before we start this project, we will have a look at basics of DS1302 RTC Module. 3.1 DS1302 RTC Module Pinout Figure2: Pinout   3.2 DS1302 Pin Configuration Pin No. Pin Name Description 1 Vcc2 Second supply input, when Vcc2 is greater than Vcc1 + 0.2V, DS1302 powers through this pin 2,3 X1 and X2 For connecting external crystal oscillator of 32.768kHz 4 GND Ground 5 CE This pin set to HIGH during a Read or a Write 6 I/O (Data Line) This is the bi-directional data pin to 3-wire interface 7 SCLK(Serial Clock) Used to synchronize data movement on the serial interface 8 Vcc1 Rechargeable energy source connected to this pin   3.3 Features Minutes, seconds, date, hours, month, day of the week, year, and leap-year compensation up to 2100 are all counted in real-time.Single and multiple (Burst mode) data transfers for Clock or RAM data read and write31*8 general-purpose battery-powered RAMSimple interface based on three TTL-compatible wiresFull operation from 2V to 5.5VSmall sizepin DIP and 8-pin SO packages are available. 3.4 Technical Specifications 3.3V is the typical supply voltage.Voltage range (concerning ground) on any pin: -0.5V to 7.0°CTemperature range (commercial): 0°C to +70°CTemperature range (Industrial): -40°C to +85°CTemperature range for storage: -55°C to +125°CTemperature for Soldering: 260°C Note: The DS1302 Datasheet, which is linked at the bottom of this page, contains all of the technical information.  3.5 Block Diagram of DS1302 RTC Chip Figure3:Diagram   3.6 How to Use a DS1302 Chip？ A typical DS1302 operating circuit is shown below. The DS1302 has two power inputs, one from the cell and one from the controller. To generate the required frequency, a crystal oscillator with a frequency of 32.768 kHz is used. The data line, reset pin, and serial-clock pins of the DS1302 are connected to the microcontroller for interfacing. Figure4:Example   Ⅳ DS1302 RTC Module with Arduino 4.1 Setting up the Hardware Pins A4 and  A5  on the  Arduino are dedicated to I2C communication. However, with the assistance of software code, any pin can be used to serve the purpose. This is known as a software I2C bus. For our purpose, we will use the "Rtc by Makuna" library, which can be found in the Arduino IDE's Tools -> Manage Libraries... menu. Following installation, the examples provided with the library can be used to learn more about the functions and initialization methods. Figure5:Library Manager Arduino  To use the following code, connect the RTC module's DAT, CLK, and RST pins to Arduino's digital pins 6, 7, and 8. 4.2 Making the Code Now we must write the C code to set the current date and time in the RTC module, read from the module, and write to the serial monitor every second.   Figure6 :Code for connection with RTC Module The line ThreeWire DatClkRst (6,7,8); creates a bundle of three wires that will be used to initialize the object Rtc from the RtcDS1302 class using the command RtcDS1302ThreeWire> Rtc(DatClkRst); The function SetDateTime resets the DS1302 chip's date and time. The date and time at the time of Arduino's C code compilation are saved in the RtcDateTime object "compiled." The loop() method has a one-second delay. Date and time are read from the RTC module and displayed on the serial monitor in each iteration. To learn how to use this RTC module, remove the line and flash the Arduino with the updated code again. Even if the Arduino's power is turned off or the RTC module is disconnected and reattached, the Arduino will be able to read and display the correct real-time.   Ⅴ FAQ 1. Which RTC module is best? Choosing The Right RTC For Your Project The DS-1307 is often the default choice for an RTC. ...The DS3234 has the distinction of using an SPI interface instead of I2C. ...The RV-1805 draws so little power that this Sparkfun module gets by without a backup battery at all. 2. What is RTC module DS3231? The DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC) with an integrated temperature- compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, and maintains accurate timekeeping when main power to the device is interrupted. 3. What is RTC in mobile phone? A real-time clock (RTC) is an electronic device (most often in the form of an integrated circuit) that measures the passage of time. 4. What is RTC in laptop? The real-time clock, or RTC, maintains the internal clock … in real time. That is how the laptop knows the time as well as the date whenever you turn it on. ... Or you can keep the laptop plugged into an AC source. 5. Does RTC work without battery? The RTC module accurately keeps time with a precise oscillator and is maintained with a small battery (not included). 6. How does RTC module work? An RTC maintains its clock by counting the cycles of an oscillator – usually an external 32.768kHz crystal oscillator circuit, an internal capacitor based oscillator, or even an embedded quartz crystal. Some can detect transitions and count the periodicity of an input that may be connected. 7. What is the difference between DS1307 and DS3231? The main difference between the DS3231 and DS1370 is the accuracy of time-keeping. DS1307 comes with an external 32kHz crystal for time-keeping whose oscillation frequency is easily affected by external temperature. This usually results with the clock being off by around five or so minutes per month.  

Introduction Latching relay is a new type of relay and also an automatic switch. Like other electromagnetic relays, it turns on and off the circuit automatically. The difference is that the normally closed or normally open state of it is completely dependent on the action of permanent magnets, and the switching state of it is triggered by a pulse electric signal of a certain width. It has the characteristics of power saving, stable performance, small size, large carrying capacity, and superior performance than general relays. Latching Relay Basics in 2 Minutes Catalog Introduction Ⅰ Working Principle 1.1 Action Principle 1.2 Action Process Ⅱ Main Functions and Advantages 2.1 Average View 2.2 Function Lists 2.3 Application Area Lists 2.4 Latching Relay Advantages Ⅲ Tech Parameters Ⅳ Latching Relay Test 4.1 Measuring Contact Resistance 4.2 Measuring Coil Resistance 4.3 Set Voltage and Current 4.4 Reset Voltage and Current Ⅴ Relay Selection 5.1 The Necessary Conditions 5.2 Relevant Information Search 5.3 Installation Layout Consideration Ⅵ FAQ Ⅰ Working Principle 1.1 Action Principle The on and off state of the latching relay is usually held by the magnetic force generated by the permanent magnet. When the contacts of the relay need to be opened or closed, only the positive (reverse) DC pulse voltage is needed to excite the coil, and the relay completes the state transition between opening and closing in an instant. Usually when the contact is in the holding state, the coil does not need to continue to be energized, and the state of the relay can be maintained unchanged only by the permanent magnet force.   1.2 Action Process When the contacts of the relay need to be set, it is only necessary to excite the coil J2 with a positive DC pulse voltage. The magnetic poles generated by the coil J2 after excitation interact with the magnetic poles of the permanent magnet. As we all known, the same polarities repel each other, but the opposite polarities attract each other. The state transition from reset to set is completed in an instant. The following schematic diagrams demonstrates the specific state transition process. The process of the latching relay changing from the set state to the reset state, which are the same. Figure 1. Reset Latching Relay Figure 2. Constant-Current Pulse Monment Figure 3. Constant-Current Pulse Monment Figure 4. Latching Relay Reset   Ⅱ Main Functions and Advantages 2.1 Average View Latching relay is an automatic switching element with isolation function. It is widely used in remote control, telemetry, communication, automatic control, mechatronics and power electronic equipment. It is one of the most important control elements in electricity.Magnetic latching relays generally have an induction mechanism (input part) that can reflect certain input variables (such as current, voltage, power, impedance, frequency, temperature, pressure, speed, light, etc.). It has the ability to turn on/off the controlled circuit. In addition, between the input part and output part of the relay, there is an intermediate mechanism (drive part) for coupling and isolating the input, functional processing and driving the output part. 2.2 Function Lists The latching relay has the following functions:1) ExpansionFor example, when the control signal of a multi-contact relay reaches a certain value, multiple circuits can be switched, disconnected, and connected at the same time according to different forms of contact groups.2) AmplificationFor example, magnetic latching relays can control a large-power circuit with a very small control quantity.3) IntegrationFor example, when a plurality of control signals are input to a multi-winding relay in a prescribed form, they will be compared and integrated to achieve a predetermined control effect.4) Automation, remote control and monitoringFor example, on the automatic device and other electrical appliances, magnetic latching relays can form a program control circuit to realize automatic operation. 2.3 Application Area Lists 1) Smart meters: IC card meters, prepaid meters, single-phase meters, three-phase meters.2) Reactive power compensation: synchronous switch, composite switch, smart capacitor.3) Intelligent control: smart home, solar street light control, automation equipment, etc. 2.4 Latching Relay Advantages 1) They only need pulse excitation, and can work with single and double coils.2) Small size, easy installation.3) Low power consumption and strong load capacity.4) Safe and reliable, long service life. Figure 5. General Relay Structure Ⅲ Tech Parameters 1) Rated VoltageIt refers to the voltage required by the coil when the relay is working normally. Depending on the model of the relay, it can be AC voltage or DC voltage.2) DC ResistanceIt refers to the DC resistance of the relay coil, which can be measured by a multimeter.3) Pull-in CurrentIt refers to the minimum current that the relay can produce the pull-in action. In normal use, the given current must be slightly larger than the pull-in current, so that the relay can work stably. As for the working voltage applied to the coil, generally do not exceed 1.5 times the rated working voltage, otherwise it will generate a larger current and burn the coil.4) Release CurrentIt refers to the maximum current that the relay generates to release the action. When the current in the pull-in state of the relay is reduced to a certain level, it will return to the unpowered release state. The current at this time is much smaller than the pull-in current.5) Switch Voltage and CurrentThis refers to the voltage and current that the relay allows to load. It determines the magnitude of the voltage and current that the relay can control, and you cannot be exceeded this value during use, otherwise it is easy to damage the contacts of the relay.6) Coil Resistance RThe resistance produced by winding a T circle with an enameled wire with a diameter of Φ: R=￡*(T/Φ).7) TemperatureThe higher the temperature, the greater the resistance, and the lower the resistance, the smaller the resistance. Generally speaking, the coil resistance refers to the coil resistance at 20°C. When the temperature is higher or lower than 20℃, there is a calculation formula: Rt=R20[1+(T℃-20℃)×0.004].8) Contact Resistance CRIt is the resistance between the contacts of the relay. And it is the sum of the shrinkage resistance Re and the surface film resistance Rf: Rk=Re+Rf.Note:🔺The factors that form shrinkage resistance Re:♦️The size of the contact pressure determines the size of the shrink resistance. The relationship between the two is inversely proportional, the greater the contact pressure, the smaller the shrinkage resistance.🔺The factors that form the surface film resistance Rf:♦️Dust in the air.♦️Harmful gases in the air: H2S, SO2, etc.♦️Organic vapor in the air: plastic, glue and rosin.♦️Oil stains on the contact surface during the production process.9) Pull-in VoltageThe minimum voltage required to close the relay contacts.10) Release voltageThe minimum voltage required to open the relay contacts.11) Insulation ResistanceThe resistance value that appears when measured with a specified DC voltage between conductive parts that are insulated from each other.12) Medium Withstand VoltageAlso known as dielectric degree, it refers to the maximum voltage that can withstand between two conductive parts without breakdown.13) Reversing RetentionThe minimum force applied on the armature assembly handle to open or close the contacts.14) Contact PressureThe interaction force generated between the moving and static contacts is equal to the contact pressure equal to the reaction force generated by the over-travel of the reed head. Figure 6. Latching Relay Product Ⅳ Latching Relay Test 4.1 Measuring Contact Resistance Use the resistance profile of the universal meter to measure the resistance of the normally closed contact and the moving point, which should be 0. The contact resistance can be measured in a more accurate way within 100 milliohms, while the resistances of the normally-open contact and the moving point should infinite. From this, it can be distinguished which is a normally-closed contact or a normally-open contact.   4.2 Measuring Coil Resistance The resistance value of the relay coil can be measured with the universal meter R×10Ω, so as to judge whether there is an open circuit phenomenon in the coil.   4.3 Set Voltage and Current Get an adjustable regulated power supply and an ammeter, input the set voltage to the relay, and insert an ammeter in the power supply loop for monitoring. Slowly increase the power supply voltage, and when you hear the sound of the relay picking up, write down the set voltage and set current. In order to be accurate, you can try several times. Pay attention to, the setting current should be the average value, and the setting voltage should be the maximum value.   4.4 Reset Voltage and Current Repeat the above operation. But there is a little difference that the reset current is the average value, and the reset voltage is the maximum value.   Ⅴ Relay Selection 5.1 The Necessary Conditions ① The power supply voltage of the control circuit, the maximum current that can be provided.② The voltage and current in the controlled circuit.③ How many sets and types of contacts are needed for the controlled circuit. When selecting a relay, the power supply voltage of the general control circuit can be used as the basis for selection. The control circuit should be able to provide enough working current to the relay, otherwise the relay will be unstable when it is closed.   5.2 Relevant Information Search After consulting the relevant information to determine the conditions of use, you can search for the relevant information to find out the model and specification number of the required relay. If you already have a relay on hand, you can check whether it can be used based on the data. Finally, consider whether the size is appropriate.   5.3 Installation Layout Consideration If it is used for general electrical appliances, in addition to considering the volume of the case, it is necessary to consider the installation layout of the circuit board. For small electrical appliances, such as toys and remote control devices, ultra-small relay products should be used.   Ⅵ FAQ 1. What is magnetic latching?The design of a Magnetic Latching Relay is such that when a short pulse of electrical energy is applied to the solenoid coil, sufficient magnetic force is generated to over-come the force of the relay' return mechanism. 2. How does a latching relay work?One latching type has two opposing coils with an over-center spring or permanent magnet hold the contacts in position after the coil is de-energized. A pulse to one coil turns the relay on and a pulse to the opposite coil turns the relay off. 3. Where is latching relay used?This type of relay is most suitable in applications like ON/OFF devices from multiple places with push-button or momentary switch. For example, it is used in a lighting circuit or conveyer to control from different locations. 4. What is a magnetic latching relay used for?A magnetic latching relay is a device in which the solenoid principle is applied to open and close light-current electrical circuits. The same device applied in heavy-current circuits is called a contactor, or circuit breaker. 5. How does a latching relay reset?Resetting is very simple. The coil circuit needs to be opened and shortened to the coils ground potential. The capacitor will be discharged through the coil and drives a current pulse with opposite polarity through the coil.

Introduction Biomedical sensors are conversion devices that convert physiological information of the human body into electrical information that has a definite functional relationship with it. The information it picks up is the physiological information of the human body, and its output is often expressed in electrical signals by sensors. Figure 1. Health Care with Sensors Catalog Introduction Ⅰ Working Principle Ⅱ Biomedical Sensor Characteristics Ⅲ Classifications Ⅳ Biomedical Sensors Functions Ⅴ Biomedical Sensors Applications 5.1 Patient Lift Chair 5.2 Sports Rehabilitation Machine 5.3 Artificial Prosthesis 5.4 Infusion Pump 5.5 Baby Incubator 5.6 Infrared Thermometer Ⅵ Biomedical Sensors Development Ⅶ FAQ Ⅰ Working Principle In modern medicine, biomedical sensors actually replace the doctor’s sensory organs and play an extended role. It has become a key technology that restricts the development of high-level advanced medical equipment. The important technological foundation of the information society. There are two types of human physiological information: electrical information and non-electrical information. In terms of distribution, there are internal (such as blood pressure and other types of pressure), body surface (such as various types of bioelectricity such as ECG) and the external (such as infrared, biomagnetism, etc.).   Ⅱ Biomedical Sensor Characteristics As an important branch of sensors, the design and application of biomedical sensors must consider the influence of human factors, such as the particularity and complexity of biological signals, and the biocompatibility, reliability and safety of biobiomedical sensors.1) The sensor itself has good technical performance, such as sensitivity, linearity, hysteresis, repeatability, frequency response range, signal-to-noise ratio, temperature drift, zero drift, sensitivity drift, etc.2) The shape and structure of the sensor should be adapted to the anatomical structure of the tested part, and the damage to the tested tissue should be small.3) The sensor has a small impact on the measured object. In other words, it will not bring a burden to physiological activities, and does not interfere with normal physiological functions of humans.4) The sensor must have enough firmness so that it will not fall off or be damaged when use it.5) The sensor and the human body must have sufficient electrical insulation to ensure the safety.6) When the sensor enters the human body, it can adapt to the chemical action in the biological body. For example, it is compatible with the chemical composition in the biological body, is not easy to be corroded, has no adverse irritation to the human body, and is non-toxic.7) If the sensor enters the blood or is buried in the body for a long time, it should not cause blood problem.8) The sensor should be simple to operate, easy to maintain, and easy to sterilize in structure. Figure 2. Health Monitoring with Biobiomedical Sensor Ⅲ Classifications 1. According to the working principle:🔺Chemical sensorUse the principle of chemical reaction to convert chemical composition and concentration into electrical signals.🔺Biological sensorUse the selective identification of biologically active substances to determine biochemical substances.🔺Physical sensorTake advantage of physical changes in materials.🔺Bioelectric electrode sensorUse the body's various bioelectricity (cardioelectricity, brain electricity, myoelectricity, neuron discharge, etc.).2. According to the type of detection:Displacement sensor, flow sensor, temperature sensor, speed sensor, pressure sensor, etc. For pressure sensors, including metal strain gauge pressure sensors, semiconductor pressure sensors, capacitive pressure sensors, etc. For temperature sensors, including thermistors, thermocouples, PN junction temperature sensors and other sensors that can detect temperature.3. According to human senses:1) Vision SensorIncluding various optical sensors and other sensors that can replace vision functions.2) Hearing SensorIncluding various pickups, piezoelectric sensors, capacitive sensors and other sensors that can replace auditory functions.3) Olfactory SensorInclude various gas-sensitive sensors, and sensors that can replace the olfactory function.This classification method is conducive to the development of bionic sensors. In addition to the widely used sensor classification methods, there are also multiple classification standards based on sensor materials, structures, energy conversion fractions, etc., all with their own advantages and limitations.   Ⅳ Biomedical Sensors Functions (1) Provide diagnostic information, such as heart sounds, blood pressure, pulse, blood flow, respiration, body temperature and other information for clinical diagnosis and medical research.(2) Monitoring: Long-term continuous measurement of certain parameters, monitoring whether these parameters are within the specified range, in order to check the patient's recovery process, and take actions when abnormalities occur. For example, after a heart operation, it is necessary to monitor changes in a series of parameters such as body temperature, pulse, arterial pressure, venous pressure, respiration, and electrocardiogram of a patient.(3) Human body control: Use the detected parameters to control the physiological process of the human body. For example, an automatic respirator uses a sensor to detect the patient’s breathing signal to control the movement of the respirator to synchronize the breathing of the human. Another example is the electronic prosthesis, which uses the measured electromyographic signal to control the movement of the human prosthesis. What’s more, have the blood flow and blood pressure control of cardiopulmonary bypass.(4) Clinical tests: In addition to collecting information directly from the human body, diagnostic information is often obtained from various body fluids (blood, urine, saliva, etc.) samples. This type of information is called biochemical test information. It is obtained by using chemical sensors and biosensors, and is an indispensable basis for diagnosing various diseases. Figure 3. Tiny Biobiomedical Sensor Ⅴ Biomedical Sensors Applications 5.1 Patient Lift Chair Electric chair lifts can provide a safe and efficient way to transfer patients from one place to another, helping to ensure the safety of patients. These basic equipment can greatly reduce the burden on nursing staff when using other transfer methods to keep on patient safety and comfort. These chairs have a lightweight and portable design and are suitable for many medical care environments. For example, modern versions of these chairs also incorporate load cells to further enhance their performance. The weighing sensor designed to measure the weight of the patient can be connected to an alarm, and when the load exceeds the safety upper limit, an alarm will be issued to the health staff immediately. 5.2 Sports Rehabilitation Machine Usually used in physiotherapy, these machines are usually used to exercise the patient's muscles as part of the therapy to restore the patient's motor skills and mobility after the patient has suffered a stroke or sports injury. With our advanced technology, modern rehabilitation machines can now provide intelligent sensing capabilities to detect the movement of patients. By integrating load cells, we are now able to provide the controller with the real-time feedback needed to predict the patient's next movement. The intelligent resistance control can increase or decrease the resistance of the exercise machine according to the force measured from the patient's actions, thereby promoting the patient's muscle growth in the most suitable way. The load cell can also be used to measure the weight of the patient, so that the rehabilitation machine can estimate the height of the patient, and pre-position the handle of the machine at the correct level in an efficient manner. 5.3 Artificial Prosthesis After a long period of development, artificial prostheses have been improved in many aspects, from the comfort of materials to the integration of electromyographic control using electrical signals generated by the wearer’s own muscles, to the fact that artificial prostheses are extremely realistic in appearance and have the same skin texture. Even match pigments and details such as hair level, nails and texture.With the integration of advanced sensors into artificial prostheses, further improvements can be brought about. They are aimed at enhancing the natural movement of artificial prostheses for arms and legs, and providing the correct amount of strength assistance during exercise. Our solutions include weighing sensors and custom force sensors that can be built into artificial prostheses. These sensors can measure the pressure of each patient's movement, thereby automatically changing the resistance of the artificial prosthesis. This feature allows patients to adapt and perform daily tasks in a more natural way. 5.4 Infusion Pump It is the most commonly used and basic tool in the medical environment and can achieve flow rates from 0.01 mL/hr to 999 mL/hr. Our customized solutions help reduce errors and achieve the goal of providing high-quality and safe patient care. And the solution can provide reliable feedback to the infusion pump to ensure continuous and accurate drug delivery, and the liquid is delivered to the patient in a timely and accurate manner, reducing the supervision workload of medical staff. 5.5 Baby Incubator Rest and reducing bacterial exposure are key factors for newborn care. Therefore, the baby incubator is designed to protect weak babies by providing a safe and stable environment. The load cell is incorporated into the incubator to achieve accurate real-time weight measurement without affecting the baby's rest or exposing the baby to the external environment. 5.6 Infrared Thermometer It is a kind of devices with non-contact temperature sensor, its sensitive element and the measured object are not in contact with each other, also known as non-contact temperature measuring instrument. This kind of instrument can be used to measure the surface temperature of moving objects, small targets and objects with small heat capacity or rapid temperature changes (transient), and it can also be used to measure the temperature distribution of the certain field. In today's outbreak of COVID-19, physical contact has been minimized and the spread of bacteria and viruses has been reduced greatly.   Ⅵ Biomedical Sensors Development Among them, the research and development of the sensor itself has two branches. One is related to the basic research of the sensor, that is, the research on the new technology and new principles required by the sensor.In recent years, the development of medical sensor products has become more and more popular, and the productization of sensor technology in the field of medical equipment products has become increasingly popular. Innovative medical products such as wearables, artificial intelligence AI, surgical robots, etc. are emerging in an endless stream. Modern medical sensor technology has got rid of the technical shortcomings of traditional biomedical sensors such as large size and poor performance, and has formed new development directions such as intelligence, miniaturization, multi-parameter, remote control, and non-invasive detection.The development of biomedical sensors is already one of the key technologies restricting the development of high-end and advanced medical equipment, and it is also one of the main driving forces to promote the development of medicine.   Ⅶ FAQ 1. Why are sensors used in healthcare?Sensors are used in electronics-based medical equipment to convert various forms of stimulation electrical signals for analysis. Sensors can increase the intelligence of medical equipment, such as life-supporting implants, and can enable bedside and remote monitoring of vital signs and other health factors. 2. What sensors are used in patient monitoring system?Thus, different types of sensors can be used (e.g., GPS receiver, accelerometer, ECG, blood pressure, blood glucose, body temperature, and breathing sensor). 3. What are the sensors used in biomedical applications?Biomedical sensor classification. Many different kinds of sensors can be used in biomedical application.Oxygen and carbon dioxide sensor for blood.Heart sound sensor.Blood flow sensor.Respiration sensor.Blood pressure sensor.Electrochemical electrode. 4. What is the main difference between biosensors and biomedical sensors?Biosensors, which can be considered a special subclassification of biomedical sensors, are a group of sensors that have two distinct components: a biological recognition element, such as a purified enzyme, antibody, or receptor, that functions as a mediator and provides the selectivity. 5. Can biomedical sensors be placed anywhere inside the body?Biosensors can be placed inside your body as well. Dr. Natalie Wisniewski, a biomedical engineer at a medical device company in San Francisco called Profusa, is developing miniature sensors that can be injected under the skin. These sensors automatically track chemicals in your body without drawing blood. 6. What are the types of biomedical sensor?While talking about biomedical engineering, we come across biomedical sensor terminology, which is then divided into three types: physical sensors, chemical sensors, and biosensors. Physical sensors are used to evaluate blood pressure, biologic magnetic field, etc. 7. Which sensors are used in biomedical applications?There are different types of physical sensors used for biomedical applications: Radiation sensors address the X-ray and gamma ray-based sensors, Mechanical sensors include ultrasound and pressure sensor Thermal sensors include a range of sensors such as thermocouple, thermistor, thermopile, optical fiber devices, P-N. 8. What are biomedical sensors used for?In medicine and biotechnology, biomedical sensors are used to detect specific biological, chemical, or physical processes, which then transmit or report the monitored data. These sensors can also be components in systems that process clinical samples, such as increasingly common lab-on-a-chip devices. 9. What sensors are used in hospitals?Types of medical sensorsThe primary sensors used within medical devices are pressure, force, airflow, oxygen, pulse oximetry, temperature, and barcode sensing. The above sensors play a critical role in the operation of the equipment. 10. What sensors are used in patient monitoring system?Thus, different types of sensors can be used (e.g., GPS receiver, accelerometer, ECG, blood pressure, blood glucose, body temperature, and breathing sensor). 11. What are the temperature sensors?A temperature sensor is a device used to measure temperature. This can be air temperature, liquid temperature or the temperature of solid matter. There are different types of temperature sensors available and they each use different technologies and principles to take the temperature measurement.