storage Related Articles

Architectural Guide: This technical guide covers eMMC vs UFS vs SSD embedded for hardware engineers and IoT architects designing 2026 edge devices.Consumer benchmarks fail in embedded design. In 2026, UFS 5.0 achieves 10.8 GB/s in microscopic footprints, cannibalizing the Gen 4 SSD market for Edge AI. Meanwhile, Automotive ADAS demands PCIe Gen 5 BGA SSDs with industrial PLP, and eMMC remains the champion solely for low-bandwidth IoT. We break down signaling architectures, thermal throttling, debugging hurdles, and write-endurance metrics required to spec your next PCB and avoid wear-out panic.eMMC vs UFS vs SSD embedded: The 2026 ConvergenceeMMC vs UFS vs SSD embedded is an architectural convergence because UFS 5.0 now matches desktop SSD speeds in mobile footprints, while BGA SSDs dominate extreme-temperature automotive environments.BGA SSDs vs. M.2 IllusionsCurrent top-ranking articles heavily bias toward the consumer perspective, treating embedded SSDs like standard laptop M.2 drives. For a deeper look at basic technology, see ssds vs hdds the storage choice. Hardware engineers face a different reality: Ball Grid Array (BGA) SSDs. These are fully integrated, soldered-down storage modules containing the NAND flash, controller, and DRAM in a single package. They eliminate the mechanical vulnerability of M.2 slots, which fail under high-vibration industrial conditions. Read more in A Complete Guide to Solid State Drive SSD.The UFS 5.0 TakeoverThe traditional hierarchy of embedded storage is obsolete. According to Samsung's June 2026 global announcement, their UFS 5.0 embedded storage solution delivers sustained read speeds of 10.8 GB/s and write speeds of 9.5 GB/s. This allows UFS 5.0 to outright beat standard PCIe Gen 4 SSDs in speed. Furthermore, it features a 40% power efficiency gain over UFS 4.1 and fits into a microscopic 7.5mm x 13mm x 0.9mm package. UFS is actively cannibalizing the lower-end SSD market for handhelds and Edge AI devices. This evolution started with innovations like the World s First UFS removable memory card line up.The Marketing DeceptionUsers on community forums often report intense frustration with deceptive marketing. Budget device manufacturers legally classify eMMC chips as "Solid State Drives" on spec sheets. This creates a severe disconnect when developers attempt to run heavy workloads on these devices, only to experience catastrophic I/O bottlenecks.Pro Tip: While many guides suggest PCIe NVMe is mandatory for high-performance edge computing, professional workflows actually require UFS 5.0 for handheld Edge AI because it delivers Gen 4 speeds at a fraction of the thermal output and physical footprint.Architectural Breakdown: Bus Structures and I/O BottlenecksBus architecture is the primary bottleneck because parallel eMMC lines suffer electromagnetic interference at high speeds, whereas UFS utilizes differential signaling for simultaneous read/write operations.Comparison of Parallel vs. Differential SignalingVisualizing the Bus: Parallel vs. Twisted PairIn visual stress tests and protocol analyses provided by Prodigy Technovations, the fundamental shift in signaling architecture is obvious. Comparing signaling diagrams (0:03 vs. 0:15), eMMC relies on a parallel bus structure with multiple data lines. As clock speeds increase, this parallel structure generates severe electromagnetic interference (EMI). UFS solves this by utilizing Low Voltage Differential Signaling (LVDS) over twisted pairs, allowing massive bandwidth scaling without proportional power drain.The eMMC Half-Duplex StutterLinux users running Crostini containers frequently complain about system lockups on budget hardware. The root cause is architectural. As experts point out in the Prodigy Technovations analysis [0:48]: "eMMC is half-duplex, hence either read or write into the memory... UFS is a full-duplex interface and allows simultaneous read and write."The UFS Command Queue & Full-Duplex AdvantageUnlike standard flash, UFS uses a Command Queue. The storage controller prioritizes and reorders tasks to maximize efficiency. Because UFS is full-duplex, an embedded system can write background telemetry logs while simultaneously reading a local AI model into RAM.Counter-Intuitive Fact: While most people think higher clock speed dictates storage performance, for containerized Linux applications, full-duplex architecture matters more than raw megahertz to prevent I/O stutter.Thermals, Power, and Footprint: Speccing for Edge AI and Smart CockpitsThermal management is critical because passive-cooled edge devices crash under sustained loads unless the storage controller actively communicates throttling states to the host processor.Active Thermal ManagementDumb storage simply overheats and fails. Modern embedded storage actively manages its thermal envelope. As noted in the Prodigy Technovations breakdown [1:01]: "UFS supports advanced features like Deep Sleep, Write Booster, and Throttling Notifications to the host." Throttling notifications allow the storage device to actively communicate its thermal status to the host CPU. The CPU can then throttle its request rate, preventing a hard system crash in passive-cooled edge devices.The Automotive ADAS ShiftThe automotive storage market for smart cockpits and autonomous driving (ADAS) has officially pivoted. Older systems relied heavily on eMMC. However, 2026 vehicle architectures require sub-60ms boot times and massive Over-The-Air (OTA) bandwidth. Industrial PCIe Gen 4 BGA SSDs deliver up to 3,500 MB/s read speeds in ultra-compact, soldered packages (as small as 11x13mm or 16x20mm). Crucially, these BGA SSDs are rated for extreme automotive temperature ranges of -40°C to 105°C (Grade 2).Pro Tip: If you prioritize data sovereignty and local processing without thermal throttling in a 15W power envelope, UFS 5.0 is the strategic winner over traditional DRAM-equipped NVMe drives.Surviving "Wear-Out Panic": TBW, PLP, and Device LifespansDevice lifespan is dictated by write endurance because soldered embedded storage cannot be replaced, making Terabytes Written and Power-Loss Protection the most critical engineering metrics.Terabytes Written (TBW) as the Ultimate MetricEngineers and power users share a collective anxiety over planned obsolescence—the fear that soldered, non-upgradable embedded storage will hit its write limit and permanently brick the board. TBW (Terabytes Written) is the ultimate metric for endurance. A 64GB drive with a low TBW rating will physically destroy its NAND cells within months if subjected to continuous 4K video loop recording.Power-Loss Protection (PLP)Industrial environments suffer from dirty power and sudden shutdowns. True industrial embedded SSDs utilize hardware-based Power-Loss Protection (PLP). They use onboard capacitors to flush cache data to the NAND during sudden power failures. Furthermore, they offer extreme endurance ratings up to 4,280 TBW when configured in pSLC (pseudo-Single Level Cell) mode. If you prioritize data integrity during dirty power shutdowns, the Micron 2100AI BGA SSD is the clearest example of industrial PLP implementation.Can Embedded Storage Be Replaced?A common consensus among enthusiasts is that BGA rework is possible. Real-world manufacturing dictates otherwise. Replacing a dead BGA chip requires specialized hot-air rework stations, reballing stencils, and risks delaminating the PCB. When the storage dies, the board is effectively bricked.Counter-Intuitive Fact: Running a high-capacity drive half-empty actually doubles its lifespan, as the controller has more free blocks to execute wear-leveling and Garbage Collection algorithms.The Hardware Engineer's Debugging RealityDebugging UFS is complex because its high-speed differential signaling and command queueing require advanced protocol analyzers to capture intermittent timing errors on the PCB.Hardware Debugging of UFS 5.0 StorageProtocol Analyzers on the PCBDesigning with UFS over eMMC introduces severe complexity. It is not plug-and-play. Visual evidence from hardware testing [1:20] shows engineers using advanced protocol analyzers directly on the physical PCB. Because of the high data rates and complex LVDS protocol, engineers require "very long captures" to catch intermittent bugs. Standard logic analyzers lack the bandwidth to decode UFS 5.0 traffic, forcing hardware teams to invest heavily in specialized debugging tools.At What Point Does eMMC Bottleneck a Modern Embedded System?eMMC bottlenecks modern systems because its 400 MB/s half-duplex limit cannot process concurrent read/write requests required by local AI models or multi-camera streams.The Threshold and Breaking PointThe eMMC 5.1 standard is strictly half-duplex and physically caps out at a maximum theoretical bandwidth of 400 MB/s (using the HS400 dual data-rate mode at 200 MHz).If you design a basic smart home temperature sensor or a single-thread IoT gateway, eMMC 5.1 remains the undisputed, cost-effective champion. The breaking point occurs the moment the system attempts to run local AI models, concurrent read/write containerized applications, or high-definition multi-camera streams. At 400 MB/s half-duplex, the storage controller physically blocks the CPU from accessing data, resulting in dropped frames and system latency.Embedded Storage Comparison TableEmbedded storage comparison is essential because engineers must balance physical footprint, thermal limits, and maximum throughput against strict bill-of-materials budgets.Feature / SpecificationeMMC 5.1UFS 5.0 (2026 Standard)PCIe Gen 4 BGA SSDSignaling ArchitectureParallel BusDifferential (LVDS)PCIe Lanes (NVMe)Duplex ModeHalf-DuplexFull-DuplexFull-DuplexMax Read Speed400 MB/s10.8 GB/s3,500 MB/sMax Write Speed~250 MB/s9.5 GB/s~3,000 MB/sCommand QueueingNoYesYesTypical Footprint11.5 x 13mm7.5 x 13 x 0.9mm16 x 20mmPrimary Use CaseBasic IoT, Smart AppliancesEdge AI, Handhelds, MobileAutomotive ADAS, ServersHardware PLP SupportRareRareCommon (Industrial Grade)ConclusionSelecting embedded storage is a strict architectural matching process because over-speccing wastes power budgets while under-speccing guarantees premature device failure and I/O bottlenecks.The 2026 hardware landscape proves that the old "Good, Better, Best" tier list is dead. eMMC 5.1 survives as the highly efficient choice for static, single-thread IoT sensors. UFS 5.0 has completely rewritten the rules for power-constrained Edge AI and handhelds, delivering 10.8 GB/s without the thermal penalty of PCIe lanes. Conversely, hyper-performance Automotive ADAS and industrial servers require the extreme temperature tolerance (-40°C to 105°C) and hardware PLP found only in true BGA SSDs. Match the protocol to your thermal envelope, calculate your required TBW, and spec the board accordingly.FAQFrequently asked questions clarify embedded storage because consumer marketing terminology often obscures the physical and architectural realities of soldered BGA components.Why do consumer spec sheets refer to eMMC as an SSD?Marketing departments exploit the literal definition of "Solid State Drive" (a drive with no moving parts) to classify eMMC as an SSD. However, architecturally, eMMC lacks the multi-channel controllers, DRAM cache, and full-duplex NVMe protocols that define true SSD performance.Does UFS use PCIe lanes?No. UFS utilizes the MIPI M-PHY physical layer and SCSI architectural model. It achieves high speeds through Low Voltage Differential Signaling (LVDS) rather than consuming the host processor's PCIe lanes, making it highly power-efficient for mobile architectures.What is a BGA SSD and how does it differ from M.2?A BGA (Ball Grid Array) SSD solders the NAND, controller, and DRAM directly onto the host motherboard as a single integrated chip. M.2 is a physical slot and connector standard. BGA SSDs eliminate the mechanical connector, making them immune to the vibration and shock failures common with M.2 drives in industrial environments.How do I calculate the lifespan (TBW) of a soldered embedded chip?Calculate your device's daily write load (e.g., 50GB of log files per day). Multiply this by the expected lifespan in days (e.g., 5 years = 1,825 days). The total is 91.25 Terabytes. You must select an embedded chip with a TBW rating significantly higher than 91.25 to account for write amplification and ensure the board outlives its deployment cycle.

Source - Alt: A close-up of an open hard drive where you can see the inner workingsData is the lifeblood of the semiconductor industry, so the way you store that data has ripple effects throughout your designs.  The two main options you have come in the form of Solid State Drives (SSDs) and Hard Disk Drives (HDDs), both of which have their place, but understanding the tradeoffs is critical.  Think beyond cost-per-gigabyte, though—these differences impact speed, power, and even your device's lifespan.This guide isn't about specs you can find anywhere. We're going under the hood to see how SSDs and HDDs really behave in the trenches. Performance comparisons, yes, but also the kind of real-world scenarios that keep engineers up at night. Cost, energy draw, potential failure points... you'll leave with more than just theory.The goal is to give you the kind of insight that takes years in the field to build. The sort of stuff that helps you explain a storage decision to colleagues and the higher-ups.Let's dive in. Performance: Where SSDs Leave HDDs in the DustLet's be blunt: if raw speed matters in your design, SSDs blow HDDs out of the water. No spinning platters or read/write heads – SSDs use flash memory, translating into near-instant data access.  Quite simply, a typical SSD can read and write at an impressive 520 - 550MB/s, whereas an HDD will achieve roughly 125MB/s, making SSD nearly four times faster.Here's the difference that makes:System Boot Times: An SSD-equipped system can boot in seconds, while an HDD might make you go grab a coffee. Think of the cumulative time saved across an entire team over a year. Minutes add up to hours, which can even add up to days.Application Launching: Applications snap open on an SSD instead of that frustrating lag. This boosts productivity and reduces user frustration. These days, people want speed and efficiency, and for products to succeed, this needs to be a primary focus.File Transfers: Need to move massive design files between systems? SSDs make it quick. With HDDs, you're likely facing significant downtime. And with content, media, and information being such a core part of the modern world (imagine editing, transferring, and uploading a two-hour YouTube documentary), this is essential.However, this isn't just about convenience. We're talking about the difference between rapid iteration on a project and getting bogged down while your hard drive churns. In competitive fields, the SSD advantage can mean getting your product to market first. Cost: It's Not Just About Price TagsDon't be fooled into thinking the SSD vs. HDD cost battle is just about dollars per gigabyte. Yes, HDDs are usually cheaper on day one, with an average 1TB internal 2.5-inch HDD costing between $40 and $60, with the cheapest SSDs of the same capacity costing around $80 (6 cents vs 8 cents per gigabyte, respectively).However, that's short-sighted accounting for semiconductor projects.Here's why:Manufacturing Differences: SSDs are fundamentally more complex to build. That means higher production costs, which you'll see reflected in the price.Flash Memory Fluctuations: Demand for flash memory spikes and falls, causing SSD prices to shift more than HDDs (which rely on more mature tech).The Total Cost of Ownership: Think beyond the purchase price. What's the cost of delays due to slow HDD performance? Will a shorter HDD lifespan mean replacement costs sooner? SSDs might make more financial sense over the life of your product.The bottom line is that budgeting for storage needs nuanced thinking.If every penny counts and performance isn't paramount, HDD might be your only option.  But if speed impacts your time-to-market or user experience, the SSD investment may actually be the more cost-effective choice long-term. Durability: Where SSDs Really ShineSource - Alt: A close-up of an open HDD when you can see the internal discPicture this: a field engineer drops their device. If it has an HDD inside, you might face a costly data disaster. SSDs, though? No moving parts to break means they often shrug off that kind of impact.But durability isn't just about accidents:Harsh Environments: Designing for extreme temperatures, vibration, or altitude? HDDs are a risk factor; SSDs often aren't. That can save you a lot in specialized enclosures and testing.Write Endurance: Yes, SSDs do have a finite number of writes per cell. But for most semiconductor applications, this isn't a worry you should lose sleep over. We're talking years of heavy use before it's a concern. Reliability: Don't Discount HDDs EntirelySource - Alt: A repairman fixing a computer hard driveHDDs aren't made of glass. When treated well, they can last a surprisingly long time, and this is well worth thinking about in your own manufacturing process.If your design will be in a protected environment and performance isn't paramount, HDDs could be a reliable and maybe even overlooked way to save on costs.The Key Takeaway: "Durable" doesn't always mean the same thing. Match your storage to the real-world conditions your device will face.  Often, that's where the SSD advantage becomes clear. Capacity: Where HDDs Still Hold an Edge (For Now)If you need raw, cheap storage, HDDs are still king of the hill. You'll routinely find multi-terabyte HDDs at budget-friendly prices, making them ideal for archiving or bulk data that doesn't need lightning-fast access.But here's where things get interesting for the semiconductor industry:SSDs are Closing the Gap: Not long ago, a high-capacity SSD was prohibitively expensive. That's changing fast. Keep an eye on price trends, especially for those mid-range capacities."Enough" is More Important than "Most": Do you really need to cram 18TB into a device? Or is the faster access of a smaller SSD a better tradeoff for your design?Hybrid Solutions: In some cases, using a smaller SSD for the OS and critical files, paired with a large HDD archive, is the smart call. Gives you the best of both worlds.Bearing this in mind, you mustn't default to "biggest is best". In the semiconductor world, capacity should be a strategic decision, not an afterthought. Power Consumption: SSDs' Hidden AdvantageSource - Alt: A data engineer using a laptop to fix problems in a large data centerThink of HDDs like old-school light bulbs: they get the job done, but they waste a lot of energy as heat. SSDs are more like LEDs – efficient, and that matters more than you might think in the semiconductor world:Battery Life: Need your device to run unplugged as long as possible? SSDs can dramatically extend battery life compared to HDDs. That's a potential selling point and less design headache for you.Datacenter Costs: Powering racks of spinning HDDs adds up fast. SSD density can offer serious power (and cooling) cost reductions at scale.The "Green" Factor:Sustainability matters more and more to clients. If you can design a lower-power device, that's a competitive advantage, and SSDs can be part of that story.Don't underestimate this: For a single laptop, the power savings might seem small. But scale that to a fleet of devices or a datacenter, and SSDs look like a very smart financial decision over the long haul. Use Cases: When to Choose SSD vs. HDDChoosing the right storage isn't one-size-fits-all. Here's a quick guide specifically tailored to the semiconductor industry:Go with SSDs if:Rapid Prototyping:Need to constantly load new firmware and data sets? An SSD will save you hours of waiting that HDDs just can't match.Wearable Devices: Battery life and shock resistance are paramount. SSDs are the clear winner here.High-Performance Workstations: Engineers working with massive CAD files or simulation data demand speed. SSDs make their work (and your product development) faster.Stick with HDDs if:Bulk Data Archival:Need to store old project files, rarely accessed? HDD is the most cost-effective way.Test Equipment Logs: Devices that generate sequential log data don't usually need SSD speed, so HDD can save on costs.Backup:A secondary HDD as an offline backup is smart even if your main system uses an SSD.The Key: Don't think "better" or "worse", think about the right tool for the job. Sometimes, that's an SSD, sometimes HDD, sometimes even a mix of both in the same design. The Bottom Line: HDDs and SSDs – Each Has a RoleThe semiconductor industry isn't about choosing the flashiest tech. It's about making smart tradeoffs to deliver the best possible product.SSDs bring the speed and ruggedness many modern designs need, while HDDs still have their place where raw capacity is the top priority.The key isn't just knowing which is "better", but how to use each as the most effective tool in your arsenal. Think beyond today's specs – watch for innovations that could shift the equation even further in the years ahead. Ready to take this knowledge to the next level? Visit Kynix to explore our full range of storage solutions and find the perfect fit for your next-generation projects.  Let's work together to push the boundaries of performance and efficiency.

OverviewThe article discusses the impact of fast charging on power quality issues and solutions to mitigate these challenges. It also highlights the importance of smart charging, artificial intelligence-based control algorithms, and cybersecurity. A number of serious problems may arise from the unplanned installation of fast charging stations and uncontrolled fast charging. When numerous electric vehicles (EVs) have to be charged at a time, the situation becomes worse because a fast charger consumes a substantial quantity of electricity in a short time. Fig. 1 depicts the electric vehicle's charging system, which includes the off-board and on-board chargers. Understanding the Challenges of Fast Charging StationsThe challenges include,Peak loadingPower quality deteriorationDiminished reserve marginsVoltage variationsEconomic lossGrid asset lossOverloadingReliability issues Power Quality IssuesThe installation of fast charging stations causes a number of power quality problems, includingHarmonic distortionSupra-harmonicsVoltage fluctuationGrid stability breakdownImpact on Transformers Harmonic DistortionThe electric vehicle charger's power electronics equipment is in charge of introducing harmonics into the grid. The current total harmonic distortion (THD) range for the ABB Terra 53J charging station is 9.3% to 30.7% in constant voltage charging mode. In contrast, the average current THD is approximately 11% in constant current charging mode. Supra-HarmonicsUsually, harmonic analysis is carried out in the frequency range of less than 2 kHz. As the tendency for rapid charging stations is to lower the size of passive components by increasing the frequency, this could result in supra-harmonic distortion (2kHz - 150kHz). Supra-harmonics can bring aboutOverheatingShortened equipment lifetimeGrid equipment malfunctions, including residual current device tripping The weak grid, particularly characterized by a low short circuit ratio, a low distribution line X/R ratio, and a high impedance, may experience more severe effects. The selection and appropriate design of the AC-DC front-end rectifier and input filter can reduce harmonic distortion and supra-harmonics. Voltage FluctuationVoltage fluctuations are another challenge with power quality that results from EVs charging quickly. The researchers have shown that an increase in charging power results in an increase in voltage fluctuation on the bus. Excessive voltage deviations result in financial penalties. Researchers have proposed a charging control method to lessen voltage fluctuations and light flicker. Grid Stability BreakdownImproper control of fast charging raises serious concerns about grid stability. According to a stability test carried out on an IEEE 3-bus system, fast charging stations reduce grid stability. Additionally, after the disturbance is eliminated from the system, it takes longer for things to return to their pre-disturbance state. Furthermore, compared to constant voltage charging, it has been demonstrated that constant current charging forces the grid closer to the unstable area. Stability can be increased by integrating energy storage and renewable energy sources into the charging station. Impact on TransformersThe installation of fast charging stations has an impact on grid assets like transformers and line cables. Rapid charging-induced overload in distribution transformers may cause insulation failure. Additionally, there is a greater need to install overhead lines, underground cables, and transformers with larger capacities. Additionally, as EV prevalence increases, transformer lifetime decreases. To lessen the effect of EV fast charging on transformer aging, loss, and overloading, a number of clever charging techniques have been put forth. Solutions for Mitigating Fast Charging ChallengesThus, to effectively manage peak demand, the following criteria play a vital role:Vehicle-to-gridVehicle-to-grid (V2G) is an emerging technology with many benefits that can mitigate the negative effects of fast charging, includingActive power regulationReactive power supportGrid stability enhancementCurrent harmonic reductionPeak load reductionReliability enhancementFrequency and voltage regulationSupport for renewable energy sources Vehicle-to-house (V2H) and vehicle-to-grid (V2G) technologies are still in the early stages of development. Further research and development must be done on wireless V2G functioning. When using V2G, rapid discharge has a detrimental effect on the battery's health. Partial Power ConvertersFor EV fast charging, partial power converters—which only process a small portion of the total power available—are gaining popularity. This approach boosts system efficiency while lowering costs and space. In the coming days, it will be possible to research the use of appropriate topologies for EV rapid charging in a partial power processing framework. Advancements in EV Charging InfrastructureProspects for future research should be focused in a way that will allow for the methodical and effective removal of various obstacles to the EV industry's successful development and maturity. By charging an EV battery in 10 to 15 minutes, ultra-fast charging station development can offer EV users a fueling experience. This calls for an in-depth investigation intoSolid-state transformersPV integrationEnergy storageCooling techniquesProtection mechanismsCharging cablesEfficient power converter design using broad-band-gap semiconductor devices to manage high power Smart Charging StrategiesIn addition, research is moving toward wireless charging, which falls into the capacitive, magnetic, and inductive power transfer categories.Solid-state battery development, cell and pack design, battery management systems, and electrolyte/electrode stability should all receive consideration.Smart charging should be implemented, which shapes charging behavior based on peak demand, renewable source generation, dynamic pricing, and EV owners' needs.Low-power DC charging stations will be installed at homes and workplaces in the future, even if residential areas now have access to AC charging.Furthermore, infrastructure for charging should be digitized, intelligent, compatible with smart grids, and integrated with cutting-edge communication systems. AI-Based Control AlgorithmsWhen making wise decisions about driving range estimation, EV charging load prediction, and dynamic pricing, artificial intelligence-based control algorithms can perform better. Cybersecurity ConsiderationsAdditionally, a critical consideration is the cyber security evaluation of both the EV and the charging infrastructure. It is possible to steal important information about the charging system, owner of the car, location, and payment methods. Malicious cyberattacks can also make it possible to access the EV's remote control. Research on cyber security, resilience, dependability, and safeguarding user and grid data from hostile attacks is therefore necessary. Summarizing the Key PointsFast charging stations pose challenges to grid stability and power quality, requiring innovative solutions for sustainable integration.Vehicle-to-grid technology offers benefits like active power regulation, peak load reduction, and support for renewable energy sources.Integrating energy storage and renewable sources can enhance stability and mitigate the negative effects of fast charging on the grid.Smart charging strategies, AI-based control algorithms, and cybersecurity measures are crucial for efficient and secure EV charging infrastructure.Advancements in power electronics, such as solid-state transformers and efficient power converterdesigns, are key for rapid charging station development. ReferenceSafayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022). A Comprehensive Review of Power Converter Topologies and Control Methods for Electric Vehicle Fast Charging Applications. IEEE Access, 10, 40753–40793. https://doi.org/10.1109/access.2022.3166935

Overview: The article discusses the rapid growth of renewable energy resources, particularly photovoltaic and wind turbines, as the most attractive power generation options due to strong government incentives and encouragement to use green energy. Over the past ten years, the use of renewable energy resources has grown rapidly throughout the world. Renewable energy sources, especially photovoltaic (PV) and wind turbines (WT), have emerged as the most attractive power generation options.Challenges in Renewable Energy Based Power SystemsThe installed wind turbine capacity increased from 540 GW to 591 GW between 2017 and 2018, while the installed solar photovoltaic capacity increased from 405 GW to 505 GW. The output of the photovoltaic and wind turbines exhibits unstable characteristics because it is heavily dependent on weather factors such as wind and cloud movement. The utility grid faces significant technical challenges with regard to power quality, generation dispatch control, and grid reliability as a result of the substantial penetration of these types of intermittent renewable energy sources. As a result, operators of renewable energy plants will face pressure to deliver consistent power, much like conventional fossil fuel power plants have done. Overgeneration and restrictions are the grid operators' growing concerns as more photovoltaic and wind turbines are connected to the grid. There are primarily two reasons for the curtailment of renewable energy, namely regional supply excess and regional transmission constraints. Although higher levels of curtailment have also been reported, the typical range of curtailment levels for wind generation is between 1% and 4%. When rigid traditional generators, like nuclear and coal plants, are unable to be used to generate lower power, negative pricing and the curtailment of renewable energy generation occur. The duck curve, which is depicted in Fig. 1, can be used to show the enormous difficulty of incorporating solar and wind energy as well as the likelihood of overgeneration and curtailment. Fig. 1. Duck curve illustration. Source: IEEE AccessThe Idea of Hybrid Power SystemsIt is generally accepted that any individual wind or solar source cannot sustainably power a load. It should also be noted that the hours of maximum output for wind and solar systems vary throughout the day and the year. The weather and climate patterns actually make solar and wind energy resources mutually beneficial. Thus, on a seasonal or daily basis, the energy produced by wind-photovoltaic resources keeps reversing. Since photovoltaic and wind turbines have benefits that complement one another in terms of power profiles, the hybrid utilization of the two should receive more attention. It is possible to develop hybridization techniques to deal with the intermittent nature of solar and wind power.Wind-Solar Hybrid Power SystemsThe wind-solar hybrid power system (WSHPS) combines photovoltaic and wind turbine subsystems to boost overall system efficiency, reduce energy storage capacity needs, and make the power grid more reliable. Wind-solar hybrid power systems are better than single photovoltaic or wind turbine systems in deficient utilities because they can compensate for unwanted intermittent variations with a single renewable energy source. In addition, the wind-solar hybrid power system can help the points of generation and consumption be adjacent to each other, which reduces infrastructure costs, particularly for rural electrification projects. As a result, wind-solar hybrid power system schemes at a single location are becoming a prominent trend in the worldwide transition to renewable energy. Voltage and frequency regulation, the mismatch between generated power and load demand, grid operation economics, and the scheduling of generation units are just some of the difficulties associated with the incorporation of large amounts of intermittent renewable energy into the utility. Therefore, grid operators must take extra measures to guarantee the reliability of the system. Because of the addition of solar and wind energy to the grids, fossil fuel generators, for example, need to be switched on and off or have their outputs adjusted more frequently to account for power fluctuations. In addition to raising maintenance costs, frequent cycling of fossil fuel generators also reduces efficiency. With high solar penetration, the cost of cycling ranges from $0.47/MWh to $1.28/MWh per fossil-fueled generator. Therefore, the aforementioned economic challenges necessitate a constant power dispatch commitment from the wind-solar hybrid power system framework at an acceptable interval.Energy Storage SystemsAdding the energy storage system (ESS) to the wind-solar hybrid power system framework will further mitigate the risks associated with renewable energy sources. In particular, the energy storage system makes it possible to provide supplementary services like voltage regulation, frequency regulation, harmonic reduction, transient stability, and load leveling. There are a variety of energy storage systems on the market, but two of the most popular are batteries and supercapacitors (SC). The characteristics of the battery and supercapacitors are compared in Table 1. There are many similarities between the supercapacitors and the conventional capacitors, with the main differences being the supercapacitors' smaller size and longer lifespan. Table 1: Battery and SC Performance Comparison Source : IEEE Access The battery energy storage system (BESS) has a low-power ramp rate, which indicates that the BESS charging-discharging rates are insufficient to meet peak or pulse load demand despite its high energy density property. The energy density is low, but the power ramp rate is high in the supercapacitor energy storage system (SESS). So, the supercapacitors can't keep up with the load for as long as it's needed. It's obvious that neither of these energy storage systems has both a high power density and a high energy density. Therefore, if only one kind of energy storage system is deployed to meet both the power and energy capacity specifications, a high installation cost may be needed to meet both the energy and power capacity needs.Hybrid Energy Storage SystemTherefore, a cost-effective energy storage system can be developed through the use of a hybrid energy storage system (HESS) consisting of a battery energy storage system and a supercapacitor energy storage system, with the supercapacitor facilitating the fast-changing power components passing through the battery, which increases the service life of the battery.Hybrid Energy Storage for Wind-Solar Hybrid Power SystemsThe main goal is to improve the way that renewable energy is used so that the wind-solar hybrid power system output power can be sent to the power grid every hour for a whole day, as desired. For this, the wind-solar hybrid power system architecture incorporates a hybrid energy storage system made up of lithium-ion batteries and supercapacitors, which can store the collected wind-solar hybrid power system energy and transform the intermittent energy into a reliable supply that can be dispatched when needed.Dispatching SchemeTo provide the wind-solar hybrid power system's output power to the utility grid, a dispatching scheme has been employed rather than the conventional peak shaving or smoothing approach. The wind-solar hybrid power system can be regulated like other conventional generators, such as thermal and hydropower plants, because of the utility's dispatching scheme. When combined with the dispatched scheme by which wind-solar hybrid power system output power is supplied to the grid, this flexibility extends to the utility grid in many ways, including the scheduling of generation units, the economics of grid operation, and the provision of grid ancillary services.Low Pass FilterA low pass filter (LPF) is used to split the energy produced by the hybrid energy storage system into two groups: the SC group receives power with a fast-dynamic response, while the battery group receives power with a slow-dynamic response. The battery's lifespan is increased by using this method because it helps the battery avoid rapid charging and discharging cycles and a large discharge current. In addition, the most cost-effective hybrid energy storage system for hourly dispatching of the wind-solar hybrid power system power scheme is sought by using curve fitting and Particle Swarm Optimization (PSO) techniques. The goal is to minimize the cost of the hybrid energy storage system while keeping the energy storage system's state-of-charge (SOC) within a certain range and meeting the power demand during each dispatching period.Summarizing the Key PointsRenewable energy resources, particularly solar and wind, have grown rapidly due to strong government incentives. The output of these energy sources exhibits unstable characteristics due to weather factors such as wind and cloud movement. Hybrid power systems that integrate wind and solar energy can maximize the potential of renewable energy. Technical challenges in photovoltaic and wind turbine power systems need to be addressed to overcome the unstable characteristics of renewable energy. The integration of energy storage systems can help mitigate the variability of renewable energy sources.ReferenceRoy, Pranoy, Jiangbiao He, and Yuan Liao. “Cost Minimization of Battery-Supercapacitor Hybrid Energy Storage for Hourly Dispatching Wind-Solar Hybrid Power System.” IEEE Access 8 (2020): 210099–115. https://doi.org/10.1109/access.2020.3037149.

Overview: This article explores the integration of smart grids, renewables, and communication technologies in the energy sector. It highlights the importance of energy storage systems, home energy management, and electric vehicles. The incorporation of a "smart grid" into today's electrical infrastructure is essential. Notable studies in the field of smart grids that relate to the Energy Internet can be broken down into the various subfields that will be covered below.Home Energy ManagementWith the aid of home energy management systems, the consumer can monitor the energy usage of each appliance in their home and make changes as necessary. The Energy Internet can be managed and operated by household energy cells through a home energy management system. Traditional energy infrastructure typically sends customers monthly bills detailing their energy consumption. The Energy Internet's home energy management systems offer a wealth of data, including consumption data, electricity generated locally via rooftop solar PV, current market rates, and storage capacity, all in real-time. Smart home energy management systems are built on a foundation of connected appliances, controls, networks, and displays. Home energy management systems provide feedback on energy use and other smart features. Consumers can make choices about their energy usage via in-home displays. For instance, Smarter Homes is a company that installs home energy management technologies to control solar rooftop PV, storage devices, and home appliances through the use of the internet of things and consumer electronic devices like iPads and Amazon Alexas. Energy management systems for the home make it easier to connect energy storage to the home's electrical network. An effective home energy management system is necessary for the envisioned energy internet to enable extensive energy trade.The Concept of Vehicle-to-Grid (V2G)Rechargeable batteries and an electric motor provide the power for plug-in electric vehicles. An energy port installed in a home or public space supplies power to a rechargeable battery. If electric vehicles are managed in a distributed fashion along with other electrical loads, they can play an important role in the demand-side management of the smart grid. When compared to stationary energy storage devices, electric vehicles have the distinct advantage of portability, as they can be driven from one location to another. Therefore, vehicle-to-grid and grid-to-vehicle initiatives can't be carried out without the widespread adoption of electric vehicles. Range anxiety is the key factor in determining how many people will sign up for vehicle-to-grid programs. Thus, even in developed nations, the rate of adoption of electric vehicles is low. But from the perspective of the power grid, vehicle-to-grid provides a variety of useful ancillary services, such as peak load management and voltage and frequency regulation. Even privately owned electric vehicles parked in a parking lot can contribute significantly to grid power during periods of inactivity with minimal disruption to the owner. Despite these advantages, people still have doubts about vehicle-to-grid. A lack of knowledge about vehicle-to-grid technical aspects is cited as the cause of this doubt. Policy-wise, many nations lack a well-developed plan for vehicle-to-grid. On the technological side, researchers are focusing on planning the distribution infrastructure to incorporate vehicle-to-grid and planning the vehicle-to-grid infrastructure to optimally operate the distribution network.Renewable Energy Integration into Grid and Distributed GenerationWith the help of a smart grid, renewable energy sources can be easily incorporated into power transmission and distribution systems. Due to the high cost of extending the power grid to rural areas, the electrification process in many countries is on hold. Research into completely independent island energy systems has been going on for a long time. The decentralized storage systems can guarantee a safer energy supply than large centralized systems. Such a system can use V2G technology to take advantage of renewable energy's full potential while also regulating peak demand. Surprisingly, the incorporation of renewable energy can resolve the challenging energy-water nexus that island nations face. For these countries, going from a state of "full input of energy and water" (FIEW) to "zero input of energy and water" (ZIEW) means they can stop relying on the mainland for their energy and water needs. The decarbonization of centrally managed energy systems and the installation of distributed energy systems with renewable energy as their main source are accelerating the transformation of the energy landscape. Based on the basic principle of incorporating distributed energy sources, controllable loads, and storage devices, the concept of a micro-grid has emerged. However, due to the fluctuation and interruption issues of renewable energy systems, managing distributed energy sources in the microgrid is a challenging task. Multi-agent-based approaches are able to handle such complexities. Distributed generation has many benefits, including efficiency gains, reduced carbon emissions, and the delaying of costly transmission line upgrades and expansions. The numerous economic, technological, and environmental advantages of distributed generation have led to its widespread acceptance as the future power paradigm. Additionally, unlike large traditional grids, distributed energy systems that are connected to small-scale generators can respond more quickly and effectively to changes in load curves. So, one of the primary goals of ongoing smart grid research and development activities is to better integrate distributed generation resources into the grid.Energy Storage SystemsFaster adoption of renewable energy sources and smart grids relies heavily on electric power storage facilities. Because of their high price and low efficiency, traditional energy storage systems were not particularly useful, relevant, or functional. It is crucial to take advantage of renewable energy generation and storage in order to set up a fully functional and optimized dynamic grid. The development of these industries requires the formulation of a crucial set of financial and regulatory policies. Devices that store and release energy can meet peak power demands without using additional, costly forms of generation. In addition, storage devices can play a crucial role in enabling cost-effective, efficient, and environmentally friendly operation of the distribution network by offsetting the demand and supply mismatch.Communication TechnologiesThe term "advanced metering infrastructure" (AMI) refers to the combination of "smart" meters, "communication networks," "meter data management systems," "software platforms," and "user interfaces". Through AMI, the utility and the end-user are able to have a two-way interaction about the end-user's energy consumption as well as the utility's price signals and load-control signals. The evolution of the smart grid’s communication technology is shown in Fig. 1.Fig. 1: Smart Grid Evolution Source: IEEE AccessThe data is sent to a centralized server, where it is stored and processed. Therefore, there must be a means of communication established that allows for the free flow of data. The information exchange channel is two-way communication. The utility's capacity for asset maintenance, energy demand management, and energy planning can all be managed through two-way communication. It is anticipated that AMI will become "smarter" in the future. It is predicted that in the near future, consumers will opt for Artificial Intelligent Meters (AIMs) that can regulate their power usage independently, irrespective of external signals. AIM also reduces the amount of human involvement in particular decision-making processes. With computational power and channel bandwidth being limited factors, it is difficult to provide a lightweight communication architecture for the transmission of big data that can quickly respond to network congestion and management requirements. As a result, many different algorithms for transmitting large amounts of data are currently under development.Summarizing the Key PointsSmart grid research aims to integrate distributed generation resources into the grid for improved efficiency and functionality. Energy storage systems are crucial for the adoption of renewable energy sources and the optimization of the dynamic grid. Electric vehicles have the advantage of portability and can contribute to the grid through vehicle-to-grid initiatives. Range anxiety and lack of knowledge hinder the widespread adoption of electric vehicles and vehicle-to-grid programs. Communication technologies play a vital role in enabling the flow of data and information exchange in the energy sector. Advanced metering infrastructure (AMI) enables two-way communication between utilities and end-users for efficient energy management. Artificially Intelligent Meters (AIMs) are predicted to become smarter, reducing human involvement in decision-making processes.ReferenceJoseph, Akhil, and Patil Balachandra. “Smart Grid to Energy Internet: A Systematic Review of Transitioning Electricity Systems.” IEEE Access 8 (2020): 215787–805. https://doi.org/10.1109/access.2020.3041031.

Overview: This article explores the opportunities and challenges of integrating clean technologies and information and communication technologies for efficient and sustainable energy management in smart grids.  Decarbonization has accelerated the fundamental shift in society toward clean technologies. Electrical energy will be a significant factor in the decarbonization process. Electrical energy is one of the most common forms of energy carriers and is seeing growing usage. Increasing electricity demand forces the expansion of the generation and transmission systems, requiring a significant amount of investment.  Power loss and reactive power flow in the transmission systems make the conventional, centralized structure of power systems less efficient. Distributed generations (DGs) have been incorporated into low- and medium-voltage distribution networks in order to increase system availability, efficiency, and cost-effectiveness. Furthermore, renewable-based distributed generation aids in the decarbonization of the electric energy sector.Evolution of Smart GridDistribution systems that have been powered up can function as a microgrid in the absence of the utility grid. A microgrid is an island-based distribution system that uses local distributed generation and energy storage to provide critical loads in island mode. Distribution systems with microgrid capabilities will have some benefits, such as increased productivity, dependability, accessibility, and power quality.  However, information and communication technologies (ICTs) are necessary for the optimal and reliable operation of various distributed generation and energy storage systems in microgrids. To operate modern energy distribution systems as efficiently and dependably as possible, the smart grid concept has been introduced. To operate and plan grid systems with irregular output and variable power sources, ICTs must be available at both the generation and transmission levels. These systems enable power systems to meet customer demands by intelligently monitoring, making decisions, and controlling contemporary power systems. In addition to incorporating DGs into distribution networks, large-scale renewable power plants like photovoltaic (PV) and wind energy systems have been widely installed in power systems, and the power grids are currently moving toward more fully renewable energy systems. Figure 1. Concept of a Distributed Power Generation System Source IEEE Access Along with efficiency, flexibility, and operability benefits, smart grid technologies also present new difficulties for the design and management of modern power systems. Restructuring the power grids to incorporate renewable energy sources, microgrid technologies, ICTs, and power electronics can result in these difficulties. Smart Grid’s Future DirectionsThe idea of smart grids has changed with the development of technology. In recent years, the smart grid's research and development have increased. As a result, the implementation of smart grids has changed from virtual to real-time. However, there are several situations in which action needs to be taken to turn it into a complete real-time network service.Big Data ManagementThe input of real-time data is a key factor in a smart grid. It serves as the backbone of the network's functioning. Power transmission, generation, transformation, and utilization data are being collected for reliable and efficient working. All decisions are made based on the information gathered. The collection and management of such a vast amount of real-time data is a significant problem.  To predict the demand for energy at various locations, the algorithms must use all the data gathered from the sensors and associated devices. To produce the best results, the algorithms must be optimized. One of the main study subjects in smart grid technology is IT infrastructure, data gathering, governance, data processing, and, most critically, data security.Investing in Smart Grid InfrastructureTo reduce carbon emissions, a number of countries have started implementing smart grid infrastructure. Many of them are engaged in projects designed to evaluate the feasibility of the network. The construction of the smart grid infrastructure has already started in nations including Australia, South Korea, and Japan. The initial investment, though, is the main concern. The ongoing maintenance of the entire network further raises the overall cost.  Therefore, before making an investment of this size in the infrastructure, a thorough financial report should be made. The price of smart grids in a few emerging nations is shown in Table 1. This will estimate the starting sum that a developing nation must invest in order to create smart grid infrastructure. Additionally, it will provide a general concept of the maintenance costs as well as any other extra expenses necessary to guarantee the network's efficient operation.Business Model RestructuringThe business model has undergone considerable adjustment as a result of the new smart grid's emergence. New technologies have altered consumer perceptions and created a network of distributed power sources. Consequently, business practices are evolving. It is necessary to implement new policies to benefit consumer communications. To integrate the load and the generated power, the utility business model should be put into practice at the distribution level.Modernization of the Energy Production SystemCustomer needs have evolved due to the smart grid's evolution. As a result, there are fluctuations in energy demand. To accommodate the demand response, the system's capacity should be raised. Additionally, the energy-producing systems must change their production policies to integrate into the smart grid network. In the smart grid network, cloud-based data management strategies are applied. The existing system needs to be upgraded and changed in order to establish IoE activities.  Cyber-physical power systems are the smart operation of future power systems, which include distributed generation, microgrids, and demand side management while utilizing information and communication technologies over the physical system. The ICTs are vulnerable to cyberattacks, data loss, and hardware failure. ICT malfunctions will reduce system performance and must be taken into account when planning a power system. Additionally, when operating power systems, cybersecurity must be taken into consideration because malicious intrusions from cyberattacks could result in a loss of power or energy. The network should incorporate security measures against cyberattacks.Summarizing the Key PointsThe paper highlights the importance of information and communication technologies in the optimal and reliable operation of distributed generation and energy storage systems in microgrids.The integration of information and communication technologies with power systems can lead to the development of cyber-physical power systems or smart grids.Smart grids enable power systems to meet customer demands by intelligently monitoring, making decisions, and controlling contemporary power systems.However, the adoption of clean technologies and information and communication technologies presents new challenges for the design and management of modern power systems.Smart grid technologies also present new difficulties for design and management but offer significant benefits such as flexibility, efficiency, operability, reliability, accessibility, and power quality. Reference(s)1.Peyghami, S., Palensky, P., & Blaabjerg, F. (2020). An Overview on the Reliability of Modern Power Electronic Based Power Systems. IEEE Open Journal of Power Electronics, 1, 34–50. https://doi.org/10.1109/ojpel.2020.29739262.Pal, R., Chavhan, S., Gupta, D., Khanna, A., Padmanaban, S., Khan, B., & Rodrigues, J. J. P. C. (2021, August 28). A comprehensive review on IoT‐based infrastructure for smart grid applications. IET Renewable Power Generation, 15(16), 3761–3776. https://doi.org/10.1049/rpg2.122723.Rafique, Z., Khalid, H. M., & Muyeen, S. M. (2020). Communication Systems in Distributed Generation: A Bibliographical Review and Frameworks. IEEE Access, 8, 207226–207239. https://doi.org/10.1109/access.2020.3037196