Phone

    00852-6915 1330

The Kynix Components - Sensors, Transducers

Stay Ahead with Expert Electronics Insights,
Industry Trends, and Innovative Tips

Sensors, Transducers

LIS2DE12TR Linear Accelerometer: CAD Models, Datasheet, Features [FAQ]

CatalogDescriptionLIS2DE12TR CAD ModelsLIS2DE12TR Pin ConnectionsLIS2DE12TR Block DiagramLIS2DE12TR FeaturesLIS2DE12TR ApplicationsLIS2DE12TR DatasheetLIS2DE12TR SpecificationsLIS2DE12TR ManufacturerUsing WarningLIS2DE12TR FAQDescriptionThe LIS2DE12 is an ultra-low-power highperformance three-axis linear accelerometer belonging to the “femto” family with digital I2C/SPI serial interface standard output. The LIS2DE12 has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring accelerations with output data rates from 1 Hz to 5.3 kHz. The self-test capability allows the user to check the functionality of the sensor in the final application. The device may be configured to generate interrupt signals by detecting two independent inertial wake-up/free-fall events as well as by the position of the device itself. The LIS2DE12 is available in a small thin plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range from -40 °C to +85 °C. LIS2DE12TR CAD Models Figure: PCB Symbol  Figure: Footprint  Figure: 3D Model LIS2DE12TR Pin Connections  Figure: Pin Connections LIS2DE12TR Block Diagram Figure: Block Diagram LIS2DE12TR FeaturesWide supply voltage, 1.71 V to 3.6 VIndependent IO supply (1.8 V) and supply voltage compatibleUltra-low power consumption down to 2 μA±2g/±4g/±8g/±16g selectable full scalesI2C/SPI digital output interface8-bit data output2 independent programmable interrupt generators for free-fall and motion detection6D/4D orientation detection“Sleep-to-wake” and “return-to-sleep” functionsFree-fall detectionMotion detectionEmbedded temperature sensorEmbedded FIFOECOPACK®, RoHS https://en.wikipedia.org/wiki/Restriction_of_Hazardous_Substances_Directiveand “Green” compliant LIS2DE12TR ApplicationsMotion-activated functionsDisplay orientationShake controlPedometerGaming and virtual reality input devicesImpact recognition and logging LIS2DE12TR DatasheetYou can download the datasheet from the link given below:LIS2DE12TR-Datasheet LIS2DE12TR SpecificationsManufacturer:STMicroelectronicsProduct Category:AccelerometersSensor Type:3-axisSensing Axis:X, Y, ZAcceleration:2 g, 4 g, 8 g, 16 gSensitivity:187.5 mg/digitOutput Type:DigitalInterface Type:I2C, SPIResolution:8 bitSupply Voltage - Max:3.6 VSupply Voltage - Min:1.71 VMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature:+ 85 ℃Mounting Style:SMD/SMTPackage / Case:LGA-12Packaging:ReelPackaging:Cut TapePackaging:MouseReelBrand:STMicroelectronicsMoisture Sensitive:YesProduct Type:AccelerometersSeries:LIS2DE12Factory Pack Quantity:8000Subcategory:SensorsUnit Weight:0.002716 oz LIS2DE12TR ManufacturerSTMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit.  LIS2DE12TR FAQWhat is the difference between accelerometer and linear accelerometer?Using the key principles of angular momentum, the gyroscope helps indicate orientation. In comparison, the accelerometer measures linear acceleration based on vibration. The typical two-axis accelerometer gives users a direction of gravity in an aircraft, smartphone, car or other device. Can accelerometer measure linear acceleration?Description. Get the measurement of acceleration in m/s2 in the X, Y, and Z directions from the accelerometer on the Android™ device. The Accelerometer block has three outputs: X , Y , and Z. The X and Y axes, which are perpendicular to the acceleration of Earth gravity, both output ≈0 What is MEMS accelerometer sensor?MEMS accelerometers are used wherever there is a need to measure linear motion, either movement, shock or vibration but without a fixed reference. They measure the linear acceleration of whatever they are attached to. 
Kynix On 2021-11-18   299
Sensors, Transducers

LIS2HH12TR Accelerometer: Block Diagram, Datasheet, Features [FAQ]

CatalogProduct OverviewLIS2HH12TR Pin ConnectionsLIS2HH12TR Block DiagramLIS2HH12TR FeaturesLIS2HH12TR ApplicationsLIS2HH12TR DatasheetLIS2HH12TR SpecificationsLIS2HH12TR ManufacturerUsing WarningLIS2HH12TR FAQ Product OverviewThe LIS2HH12 is an ultra-low-power highperformance three-axis linear accelerometer belonging to the “pico” family. The LIS2HH12 has full scales of ±2g/±4g/±8g and is capable of measuring accelerations with output data rates from 10 Hz to 800 Hz. The self-test capability allows the user to check the functioning of the sensor in the final application. The LIS2HH12 has an integrated first-in, first-out (FIFO) buffer allowing the user to store data in order to limit intervention by the host processor. The LIS2HH12 is available in a small thin plastic land grid array package (LGA) and it is guaranteed to operate over an extended temperature range from -40 °C to +85 °C. LIS2HH12TR Pin ConnectionsFigure: LIS2HH12TR Pin Connections LIS2HH12TR Block DiagramFigure: LIS2HH12TR Block Diagram LIS2HH12TR Timing DiagramFigure: LIS2HH12TR I2C slave timing diagram Figure: LIS2HH12TR SPI slave timing diagram LIS2HH12TR FeaturesWide supply voltage, 1.71 V to 3.6 VIndependent IOs supply (1.8 V) and supply voltage compatibleUltra-low power consumption2g/±4g/±8g full-scaleI2C/SPI digital output interface16-bit data outputEmbedded temperature sensorEmbedded self-testEmbedded FIFO10000 g high shock survivabilityECOPACK®, RoHS and “Green” compliant LIS2HH12TR ApplicationsMotion-controlled user interfacesGaming and virtual realityPedometersIntelligent power saving for handheld devicesDisplay orientationClick/double-click recognitionImpact recognition and loggingVibration monitoring and compensation LIS2HH12TR DatasheetYou can download the datasheet from the link given below:LIS2HH12TR Datasheet LIS2HH12TR SpecificationsProduct AttributeAttribute ValueManufacturer:STMicroelectronicsProduct Category:AccelerometersSensor Type:3-axisSensing Axis:X, Y, ZAcceleration:2 g, 4 g, 8 gSensitivity:0.061 mg/digit, 0.122 mg/digit, 0.244 mg/digitOutput Type:DigitalInterface Type:I²C, SPIResolution:16 bitSupply Voltage:1.71V ~ 3.6VOperating Supply Current:180 uAOperating Temperature-40°C ~ 85°C (TA)Mounting Style:SMD/SMTPackage / Case:LGA-12Brand:STMicroelectronicsMoisture Sensitive:YesProduct Type:AccelerometersSeries:LIS2HH12Subcategory:SensorsUnit Weight:0.002787 oz LIS2HH12TR ManufacturerSTMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. LIS2HH12TR FAQWhat is an LIS2HH12TR?STMicroelectronics' LIS2HH12 MEMS Digital Output Motion Sensor is an ultra-low-power high-performance three-axis linear accelerometer belonging to the "pico" family. The self-test capability allows the user to check the functioning of the sensor in the final application. What is STMicroelectronics accelerometer?STMicroelectronics MEMS Accelerometers include analog and digital sensors featuring up to ±400g acceleration full scale and from 1.71V to 3.6V supply voltage. Accelerometers are an ideal choice for ultra-low-power applications and have advanced power-saving features. What is an accelerometer used for?An accelerometer is a basic technology that converts mechanical motion into an electrical signal. It is an electromechanical device that measures acceleration force, whether caused by gravity or motion. 
Kynix On 2021-11-17   377
Sensors, Transducers

MMA8453QR1 Digital Accelerometer: Block Diagram, Datasheet, Features [FAQ]

CatalogDescriptionMMA8453QR1 Pin ConnectionsMMA8453QR1 Block DiagramMMA8453QR1 FeaturesMMA8453QR1 ApplicationsMMA8453QR1 DatasheetMMA8453QR1 SpecificationsMMA8453QR1 ManufacturerUsing WarningMMA8453QR1 FAQDescriptionThe MMA8453Q is a smart, low-power, three-axis, capacitive, micromachined accelerometer with 10 bits of resolution. This accelerometer is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. The MMA8453Q has user selectable full scales of ±2 g/±4 g/±8 g. The device can be configured to generate inertial wakeup interrupt signals from any combination of the configurable embedded functions allowing the MMA8453Q to monitor events and remain in a low-power mode during periods of inactivity. The MMA8453Q is available in a 16-pin QFN, 3 mm x 3 mm x 1 mm package. MMA8453QR1 Pin Connections Figure: Pin Connections MMA8453QR1 Block Diagram Figure: Block Diagram MMA8453QR1 Features1.95 V to 3.6 V supply voltage1.6 V to 3.6 V interface voltage±2 g/±4 g/±8 gdynamically selectable full-scaleOutput data rates (ODR) from 1.56 Hz to 800 Hz99 μg/√Hz noise10-bit and 8-bit digital outputI2C digital output interface (operates to 2.25 MHz with 4.7 kΩpullup)Two programmable interrupt pins for six interrupt sourcesThree embedded channels of motion detection        – Freefall or motion detection: one channel        – Pulse detection: one channel        – Jolt detection: one channelOrientation (portrait/landscape) detection with set hysteresisAutomatic ODR change for auto-wake and return to sleepSelf-testCurrent consumption: 6 μA to 165 μA MMA8453QR1 Typical ApplicationsE-compass applicationsStatic orientation detection (portrait/landscape, up/down, left/right, back/front position identification)Notebook, e-reader, and laptop tumble and freefall detectionReal-time orientation detection (virtual reality and gaming 3D user position feedback)Real-time activity analysis (pedometer step counting, freefall drop detection for HDD, dead-reckoning GPS backup)Motion detection for portable product power saving (auto-sleep and auto-wake for cell phone, PDA, GPS, gaming)Shock and vibration monitoring (mechatronic compensation, shipping and warranty usage logging)User interface (menu scrolling by orientation change, tap detection for button replacement) MMA8453QR1 DatasheetYou can download the datasheet from the link given below:MMA8453QR1-Datasheet MMA8453QR1 SpecificationsManufacturer:NXPProduct Category:AccelerometersSensor Type:3-axisSensing Axis:X, Y, ZAcceleration:2 g, 4 g, 8 gSensitivity:256 count/g, 512 count/g, 1024 count/gOutput Type:DigitalInterface Type:I2CResolution:8 bit, 10 bitSupply Voltage - Max:3.6 VSupply Voltage - Min:1.95 VMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature:+ 85 ℃Mounting Style:SMD/SMTPackage / Case:QFN-16Packaging:ReelPackaging:Cut TapePackaging:MouseReelBrand:NXP SemiconductorsProduct Type:AccelerometersSeries:MMA8453QFactory Pack Quantity:1000Subcategory:SensorsTradename:XtrinsicPart # Aliases:9.3531E+11Unit Weight:0.001122 oz MMA8453QR1 ManufacturerNXP Semiconductors N.V. is a Netherlands-domiciled American semiconductor manufacturer with headquarters in Eindhoven, Netherlands that focuses in the automotive industry. The company employs approximately 31,000 people in more than 35 countries, including 11,200 engineers in 33 countries. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. MMA8453QR1 FAQWhat is digital accelerometer?An accelerometer is a tool that measures proper acceleration. Proper acceleration is the acceleration (the rate of change of velocity) of a body in its own instantaneous rest frame; this is different from coordinate acceleration, which is acceleration in a fixed coordinate system. How does a digital accelerometer work?An accelerometer works using an electromechanical sensor that is designed to measure either static or dynamic acceleration. Static acceleration is the constant force acting on a body, like gravity or friction. What does an accelerometer detect?Accelerometers are sensing devices that measure a moving object's acceleration and can detect frequency and intensity of human movement. 
Kynix On 2021-11-16   393
Sensors, Transducers

BMG250 Triaxial Gyroscope: Block Diagram, Datasheet, Features [FAQ]

CatalogProduct Overview BMG250 Timing DiagramBMG250 Block DiagramBMG250 FeaturesBMG250 ApplicationsBMG250 Target DevicesBMG250 DatasheetBMG250 SpecificationsBMG250 ManufacturerUsing WarningBMG250 FAQ Product OverviewThe BMG250 is a three axial gyroscope consisting of a state-of-the-art low power 3-axis gyroscope. It has been designed for low power, high precision multi-axis applications in mobile phones, tablets, wearable devices, remote controls, game controllers, head-mounted devices and toys. The BMG250 is available in a compact 2.5 × 3.0 × 0.83 mm3 LGA package. When the gyroscope is in full operation mode, power consumption is typically 850 µA, enabling always-on applications in battery driven devices. The BMG250 offers a wide VDD voltage range from 1.71V to 3.6V and a VDDIO range from 1.2V to 3.6V, allowing the BMG250 to be powered at 1.8V for both VDD and VDDIO. The BMG250 provides high precision sensor data together with the accurate timing of the corresponding data. The timestamps have a resolution of up to 39 µs. The integrated 1024 byte FIFO buffer supports low power applications and prevents data loss in non-real-time systems. The intelligent FIFO architecture allows dynamic reallocation of FIFO space. For typical applications, this is sufficient for approx. 1.4s of data capture at an output data rate of 100Hz in FIFO mode with data header. The smart built-in power management unit (PMU) can be configured, for example, to further lower the power consumption by automatically sending the gyroscope temporarily into fast start-up mode and waking it up again by externally triggering this function from the host device’s logical unit. Besides the flexible primary interface (I2C or SPI) that is used to connect to the host, BMG250 provides an additional secondary interface. This secondary interface can be used in SPI mode for OIS (optical image stabilization) applications in conjunction with camera modules, or in advanced gaming use cases. BMG250 Timing DiagramFigure: BMG250 I²C Timing Diagram  Figure: BMG250 SPI Timing Diagram BMG250 Block DiagramFigure: BMG250 Block Diagram BMG250 FeaturesHigh performance low noise and low offset gyroscopeVery low power consumption: typ. 850 µA (gyroscope in full operation)Very small 2.5 x 3.0 mm2 footprint, height 0.83 mmSecondary high speed interface for OIS application         o Optimized for low latency and high Output Data RateParallel use for OIS and standard UI applications         o UI → Primary Interface (I²C)         o OIS → Secondary Interface (SPI)Built-in power management unit (PMU) for advanced power managementPower saving with fast start-up mode of gyroscopeWide power supply range: 1.71V … 3.6VAllocatable FIFO buffer of 1024 bytesHardware sensor time-stamps for accurate sensor data fusionFlexible digital interface to connect to host over I2C or SPIExtended I2C mode with clock frequencies up to 1 MHz BMG250 ApplicationsOptical Image StabilizationElectronic Image StabilizationOptical/Electronic Video StabilizationAugmented RealityIndoor navigation3D scanning / indoor mappingAdvanced gesture recognitionImmersive gaming3-axis motion detection, e.g. Air mouse applications and pointersAdvanced system power management for mobile applicationswarranty logging BMG250 Target Devices Smart phones, tablet and transformer PCsCamera modules for SmartphonesDigital Still Cameras / Digital Video CamerasGame controllers, remote controls and pointing devicesHead tracking devicesWearable devices, e.g. smart watches or augmented reality glassesSport and fitness devicesToys, e.g. toy helicopters BMG250 DatasheetYou can download the datasheet from the link given below:BMG250 Datasheet BMG250 SpecificationsProduct AttributeAttribute ValueManufacturer:BoschProduct Category:GyroscopesSensor Type:3-axisSensing Axis:X, Y, ZRange:125 deg/s to 2000 deg/sOutput Type:DigitalSensitivity:16.4 LSB/(deg/s)Interface Type:I²C, SPIResolution:16 bitOperating Supply Current:850 uASupply Voltage:1.71V ~ 3.6VPackage / Case:LGA-14Brand:Bosch SensortecFeatures:Built-in power management unitHeight:0.83 mmLength:3 mmOperating Temperature-40°C ~ 85°CProduct Type:GyroscopesSubcategory:SensorsWidth:2.5 mmPart # Aliases:0273.142.064-1NVUnit Weight:0.003457 oz BMG250 ManufacturerBosch Sensortec GmbH is a fully owned subsidiary of Robert Bosch GmbH dedicated to the world of consumer electronics; offering a complete portfolio of micro-electro-mechanical systems (MEMS) based sensors and solutions that enable mobile devices to feel and sense the world around them. Bosch Sensortec develops and markets a broad portfolio of MEMS sensors, solutions and systems for applications in smart phones, tablets, wearable devices, and various products within the IoT (Internet of Things). Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. BMG250 FAQWhat is a BMG250?The BMG250 is an ultra-small, digital 3-axis gyroscope sensor. BMG250 provides a precise low-noise angular rate (gyroscopic) measurement at market leading low power consumption. The BMG250 is optimized for image stabilization duties in parallel to standard user interface applications. How does a 3 axis gyroscope work?Vibration gyro sensors sense angular velocity from the Coriolis force applied to a vibrating object. When the gyro is rotated, the Coriolis force acts on the drive arms, producing vertical vibration. What is a gyroscope used for?Gyroscopes are used in compasses and automatic pilots on ships and aircraft, in the steering mechanisms of torpedoes, and in the inertial guidance systems installed in space launch vehicles, ballistic missiles, and orbiting satellites. 
Kynix On 2021-11-16   414
Sensors, Transducers

MPX5700GP Pressure Sensor: CAD Models, Datasheet, Features [FAQ]

CatalogProduct OverviewMPX5700GP CAD ModelsMPX5700GP Package DimensionsMPX5700GP SchematicMPX5700GP FeaturesMPX5700GP DatasheetMPX5700GP SpecificationsMPX5700GP ManufacturerUsing WarningMPX5700GP FAQ Product OverviewThe MPX5700 series piezoresistive transducer is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure. MPX5700GP CAD ModelsFigure: MPX5700GP PCB Symbol  Figure: MPX5700GP Footprint  Figure: MPX5700GP 3D Models MPX5700GP Package DimensionsFigure: MPX5700GP Package Dimensions MPX5700GP SchematicFigure: MPX5700GP Schematic MPX5700GP Features2.5% Maximum Error over 0℃to 85℃Ideally Suited for Microprocessor or Microcontroller-BasedSystemsAvailableinAbsolute, Differential and Gauge ConfigurationsPatented Silicon Shear Stress Strain GaugeDurable Epoxy Unibody Element MPX5700GP DatasheetYou can download the datasheet from the link given below:MPX5700GP Datasheet MPX5700GP SpecificationsProduct AttributeAttribute ValueManufacturer:NXPProduct Category:Board Mount Pressure SensorsPressure Type:GaugeOperating Pressure:102 psiAccuracy:2.50%Output Type:AnalogMounting Style:Through HoleOperating Supply Voltage:5 VPort Type:Single Radial BarbedPackage / Case:Unibody-6Operating Temperature-40°C ~ 125°CSeries:MPX5700Packaging:TrayBrand:NXP SemiconductorsOperating Supply Current:7 mAOutput Voltage:4.7 VPort Size:4.93 mmProduct Type:Pressure SensorsSubcategory:SensorsSupply Voltage - Max:5.25 VSupply Voltage - Min:4.75 VPart # Aliases:9.35319E+11Unit Weight:0.119095 oz MPX5700GP ManufacturerNXP Semiconductors N.V. is a Netherlands-domiciled American semiconductor manufacturer with headquarters in Eindhoven, Netherlands that focuses in the automotive industry. The company employs approximately 31,000 people in more than 35 countries, including 11,200 engineers in 33 countries. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. MPX5700GP FAQWhat is an MPX5700GP?The MPX5700GP is a single-port integrated silicon Pressure Sensor features on-chip signal conditioned, temperature compensated and calibrated. What is meant by pressure sensor?A pressure sensor is a device or instrument which is able to measure the pressure in gases or liquids. A pressure sensor consists of a pressure-sensitive element which can determine the pressure being applied and components to convert the information into an output signal. What are the different types of pressure sensors?Absolute pressure sensors measure the pressure relative to a reference chamber (nearly vacuum). Gauge pressure sensors – or relative pressure sensors – are used to measure the pressure relative to the currently present atmospheric pressure. What are pressure sensors used to detect?A pressure sensor is an electronic device that detects, regulates, or monitors pressure, and converts perceived physical data into an electronic signal. What is the output of a pressure sensor?A typical pressure sensor works producing a strain gauge output as the deflection of a diaphragm is caused. Depending on the strain gauge technology the output can vary from 1 to 3 millivolts per volt (mV/V) to as much as 10 to 30 mV/V. 
Kynix On 2021-11-12   826
Sensors, Transducers

LSM6DSMTR iNEMO Inertial Module: CAD Models, Datasheet, Features [FAQ]

CatalogDescriptionLSM6DSMTR CAD ModelsLSM6DSMTR Pin ConfigurationLSM6DSMTR Block Diagram of FiltersLSM6DSMTR FeaturesLSM6DSMTR ApplicationsEmbedded Low-power FeaturesLSM6DSMTR DatasheetLSM6DSMTR SpecificationsLSM6DSMTR ManufacturerUsing WarningLSM6DSMTR FAQDescriptionThe LSM6DSM is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 0.65 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DSM supports main OS requirements, offering real, virtual and batch sensors with 4 kbyte for dynamic data batching. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the characteristics of the sensing element. The LSM6DSM has a full-scale acceleration range of ±2/±4/±8/±16 g and an angular rate range of ±125/±250/±500/±1000/±2000 dps. The LSM6DSM fully supports EIS and OIS applications as the module includes a dedicated configurable signal processing path for OIS and auxiliary SPI configurable for both the gyroscope and accelerometer. High robustness to mechanical shock makes the LSM6DSM the preferred choice of system designers for the creation and manufacturing of reliable products. The LSM6DSM is available in a plastic land grid array (LGA) package. LSM6DSMTR CAD Models Figure: PCB Symbol  Figure: Footprint  Figure: 3D Model LSM6DSMTR Pin Configuration Figure: Pin Configuration LSM6DSMTR Block Diagram of Filters Figure: Block Diagram of Filters LSM6DSMTR Features“Always-on” experience with low power consumption for both accelerometer and gyroscopePower consumption: 0.4 mA in combo normal mode and 0.65 mA in combo high-performance modeSmart FIFO up to 4 kbyte based on features setAndroid M compliantAuxiliary SPI for OIS data output for gyroscope and accelerometerHard, soft ironing for external magnetic sensor corrections±2/±4/±8/±16 gfull scale±125/±250/±500/±1000/±2000 dps full scaleAnalog supply voltage: 1.71 V to 3.6 VSPI & I2C serial interface with main processor data synchronizationDedicated gyroscope low-pass filters for UI and OIS applicationsSmart embedded functions: pedometer, step detector and step counter, significant motion and tiltStandard interrupts: free-fall, wakeup, 6D/4D orientation, click and double-clickEmbedded temperature sensorECOPACK®, RoHS and “Green” compliant LSM6DSMTR ApplicationsMotion tracking and gesture detectionSensor hubIndoor navigationIoT and connected devicesSmart power saving for handheld devicesEIS and OIS for camera applicationsVibration monitoring and compensation Embedded Low-power FeaturesThe LSM6DSM has been designed to be fully compliant with Android, featuring the following on-chip functions:4 kbyte data buffering        – 100% efficiency with flexible configurations and partitioning        – Possibility to store timestampEvent-detection interrupts (fully configurable):        – Free-fall        – Wakeup        – 6D orientation        – Click And double-click sensing        – Activity / inactivity recognitionSpecific IP blocks with negligible power consumption and high-performance:        – Pedometer functions: step detector and step counters        – Tilt        – Absolute Wrist Tilt        – Significant Motion DetectionSensor hub        – Up to 6 total sensors: 2 internal (accelerometer and gyroscope) and 4 external sensorsData rate synchronization with external trigger for reduced sensor access and enhanced fusion LSM6DSMTR DatasheetYou can download the datasheet from the link given below:LSM6DSMTR -Datasheet LSM6DSMTR SpecificationsManufacturer:STMicroelectronicsProduct Category:IMUs - Inertial Measurement UnitsSensor Type:6-axisSensing Axis:X, Y, ZSensitivity:0.061 mg/LSB, 0.122 mg/LSB, 0.244 mg/LSB, 0.488 mg/LSBAcceleration:2 g, 4 g, 8 g, 16 gOutput Type:DigitalInterface Type:I2C, SPIResolution:16 bitOperating Supply Current:650 uASupply Voltage - Min:1.71 VSupply Voltage - Max:3.6 VMinimum Operating Temperature:- 40 CMaximum Operating Temperature:+ 85 CPackage / Case:LGA-14Packaging:ReelPackaging:Cut TapePackaging:MouseReelBrand:STMicroelectronicsMoisture Sensitive:YesProduct Type:IMUs - Inertial Measurement UnitsSeries:LSM6DSMFactory Pack Quantity:5000Subcategory:SensorsUnit Weight:0.004233 oz LSM6DSMTR ManufacturerSTMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. LSM6DSMTR FAQWhere is inertial sensor used?High-end inertial sensors are used in military and aerospace applications like smart ammunition, aircraft dynamics control, crash detection, seat ejection system in aircrafts, and microgravity measurement. Accelerometers consist of a mechanical sensing element that can measure acceleration in one or more axis. What is an IMU used for?An Inertial Measurement Unit (IMU) is a device that can measure and report specific gravity and angular rate of an object to which it is attached. What does the IMU consist of?The IMU is a sensor that measures triaxial acceleration and triaxial angular velocity. The IMU consists of an accelerometer, which can output linear acceleration signals on three axes in space, and a gyroscope, which can output angular velocity signals on three axes in space. 
Kynix On 2021-11-11   189

Kynix

Kynix was founded in 2008, specializing in the electronic components distribution business. We adhere to honesty and ethics as our business philosophy and have gradually established an excellent reputation and credibility in our international business. With the accurate quotation, excellent credit, reasonable price, reliable quality, fast delivery, and authentic service, we have won the praise of the majority of customers.

Follow us

Join our mailing list!

Be the first to know about new products, special offers, and more.

Kynix

  • How to purchase

  • Order
  • Search & Inquiry
  • Shipping & Tracking
  • Payment Methods
  • Contact Us

  • Tel: 00852-6915 1330
  • Email: info@kynix.com
  • Follow Us

authentication

Kynix

© 2008-2026 kynix.com all rights reserve.