security Related Articles

ⅠIntroduction The most common system is single-phase, which is mostly used in homes, whereas three-phase is commonly used in industrial or commercial buildings where heavy loads of power are required. Catalog ⅠIntroduction Ⅱ Three-phase Power Related Video: Ⅲ Single-phase AC Power Basics 3.1 What is Single-phase AC power? 3.2 Advantages of Single-phase 3.3 Disadvantages of Single-phase   Ⅳ 3-phase Power Explained 4.1 What is 3-phase Power? 4.2 Advantages of Three-Phase System 4.3 Disadvantages of Three-Phase System Ⅴ Why We Need 3-phase Power？ Ⅵ What Are the Differences Between Single-Phase Power and Three-Phase Power? Ⅶ FAQ   Ⅱ Three-phase Power Related Video: Three-Phase Power Explained   Three-phase Video Description: This video will take a close look at three-phase power and explain how it works. Three-phase power can be defined as the common method of alternating current power generation, transmission, and distribution. It is a type of polyphase system, and is the most common method used by electric grids worldwide to transfer power.   Ⅲ Single-phase AC Power Basics Single-phase electric power is the distribution of alternating current electric power using a system in which all of the supply voltages vary in unison. When the loads are mostly lighting and heating, with only a few large electric motors, single-phase distribution is used.   3.1 What is Single-phase AC power? Before delving into that topic, it's a good idea to first understand single-phase alternating current (AC). Single-phase alternating current (AC) power is delivered via a three-wire system consisting of one "hot" wire, one neutral wire, and one ground wire. With alternating current power, the power current or voltage reverses on a regular basis, flowing one way on the hot wire that supplies power to the load and the other way on the neutral wire. During a 360-degree phase change, a full power cycle occurs, and the voltage reverses itself 50 or 60 times per second, depending on the system in use in different parts of the world. It is 60 times or 60 hertz in North America (Hz). It is critical to note that the two current-carrying legs are always 180 degrees apart. Consider the power as riding a wave, specifically a sine wave with a defined frequency and amplitude. During each cycle, the waves on each wire pass through zero amplitude twice (see Figure 1). There is no power delivered to the load during these times. Figure1:Single-phase   These brief interruptions have no effect on residential and commercial building applications such as office environments, but they have serious consequences for the motors that power large machinery, as well as computers and other IT equipment.   3.2 Advantages of Single-phase Single-phase connections are designed for household supplies and residential homes. This is due to the fact that most appliances, such as televisions, lights, fans, refrigerators, and so on, require only a small amount of electricity to function.A single-phase connection works in a straightforward manner. It consists of a compact and lightweight unit in which the flow of electricity through the wires is reduced as the voltage increases.Because of the power reduction, it ensures that the power from a single-phase connection operates at peak efficiency and effectively transmits power.A single-phase connection is best suited for units rated up to 5 horsepower.   3.3 Disadvantages of Single-phase     Ⅳ 3-phase Power Explained Three-phase electric power (abbreviated 3), is a type of alternating current that is commonly used in power generation, transmission, and distribution. It is a type of polyphase system that uses three wires (or four if a neutral return wire is used) and is the most common method used by electrical grids around the world to transfer power.   4.1 What is 3-phase Power? As the name implies, three separate currents are provided by three-phase power systems, each separated by one-third of the time it takes to complete a full cycle. However, unlike single-phase, where the two hot legs are always 180 degrees apart, the currents in 3-phase are separated by 120 degrees. Figure 2 shows that when one line is at its peak current, the other two are not. When phase 1 reaches its positive peak, phases 2 and 3 are both at -0.5. In contrast to single-phase current, there is no point at which no power is delivered to the load. In fact, one of the lines is at a peak positive or negative position at six different points in each phase. In practice, this means that the total amount of power supplied by all three currents remains constant; there are no cyclical peaks and valleys as with single-phase. Many computers and motors used in heavy machinery are built with this in mind. Instead of having to account for the variation inherent in single-phase AC power, they can draw a steady stream of constant power. They use less energy as a result. Consider the difference between a single-cylinder and a three-cylinder engine. Both use a four-stroke engine (intake, compression, power, exhaust). With a single-cylinder engine, you only get one "power" cycle for every four-cylinder stroke, resulting in rather uneven power delivery. A three-stroke engine, on the other hand, produces power in three alternating phases (again separated by 120 degrees), resulting in smoother, more consistent, and efficient power. Figure2:Three-phase 4.2 Advantages of Three Phase System There are numerous reasons why this power is preferable to single-phase power. The single phase power equation is   Figure3: single phase power equation Which is a function that changes over time. In contrast, the three-phase power equation is   Figure4: three-phase power equation Which is a constant function that is independent of time. As a result, the single-phase power is pulsing. This has no effect on low-rated motors, but it causes excessive vibration in higher-rated motors. As a result, three-phase power is preferable for high-tension power loads. A three-phase machine has a 1.5 times higher rating than a single-phase machine of the same size. Because single-phase induction motors have no starting torque, we must provide an auxiliary means of starting, whereas three-phase induction motors are self-starting and do not require any auxiliary means. In the case of a three-phase system, the power factor and efficiency are both higher. Which is a constant function that is independent of time. As a result, the single-phase power is pulsing. This has no effect on low-rated motors, but it causes excessive vibration in higher-rated motors. As a result, three-phase power is preferable for high-tension power loads. A three-phase machine has a 1.5 times higher rating than a single-phase machine of the same size. Because single-phase induction motors have no starting torque, we must provide an auxiliary means of starting, whereas three-phase induction motors are self-starting and do not require any auxiliary means. In the case of a three-phase system, the power factor and efficiency are both higher.   4.3 Disadvantages of 3-phase Power The most significant disadvantage of a three-phase connection is that it cannot handle the overload. As a result, it may cause damage to the equipment, increasing the likelihood of costly repairs. This is due to the high cost of individual components. Because the unit voltage is so high, a three-phase power connection necessitates a significant investment in insulation. Insulation varies with voltage, and wire size is determined by power distribution.   Ⅴ Why We Need 3-phase Power？ The ability to deliver ever-increasing amounts of power is especially important as data centers and server rooms become denser. More powerful computing systems are being crammed into the same spaces that once housed servers that used a fraction of the electrical power that today's computers and networks require. Not long ago, a single IT rack of ten servers would consume a total of five kilowatts (kW). Today, that same rack may house dozens of servers, each drawing 20 or 30 kW. At those levels, efficiency is important, as even a small percentage improvement in power consumption will result in significant dollar savings over time. Another issue is wiring. Take a look at a 15 kW rack. Using single-phase power at 120 volts AC (VAC), it takes 125 amps to power the rack, which would necessitate a wire almost one-quarter inch in diameter (AWG 4) — too thick to work with easily, let alone affordably. Because three-phase is more efficient, it can deliver the same amount of power (and more) while using less wiring. To support the same 15 kW rack with 3-phase power, three wires capable of supplying 42 amps (AWG 10) are required, each less than one-tenth of an inch in diameter.   Ⅵ What Are the Differences Between Single-Phase Power and Three-Phase Power? The following are the key distinctions between a single-phase and three-phase connection. Ⅶ FAQ 1. How is 3phase power generated? Electric power is generated as three phase alternating current (AC) by turning mechanical turbines from the forces of water, steam, or other means in order to turn generators, thereby, converting the mechanical energy into electric energy. In the US, generators turn at 60 revolutions per second or at 60 hertz (Hz). 2. Why does three phase not need a neutral? A neutral wire allows the three phase system to use a higher voltage while still supporting lower voltage single phase appliances. In high voltage distribution situations it is common not to have a neutral wire as the loads can simply be connected between phases (phase-phase connection). 3. How many wires does 3 phase have? four wires Three-phase has four wires: three actives (called phases) and one neutral. The neutral wire is earthed at the switchboard. 4. How do you make 3 phase voltage? In a 3 phase system, there are three equal voltages or EMFs of the same frequency having a phase difference of 120 degrees. These voltages can be produced by a three-phase AC generator having three identical windings displaced apart from each other by 120 degrees electrical. 5. Does three-phase need a ground? Does the National Electrical Code (NEC) require a 480-volt (V), three-phase, 3-wire, delta-connected system to be grounded? No, it is optional. This article examines the NEC's electrical-system grounding provision. 6. What is the symbol for 3 phase? A three-phase system may be arranged in delta (∆) or star (Y) (also denoted as wye in some areas). 7.Is 240V single phase or 3 phase? 240V power is used in the US and parts of the world. In the US 120 / 240V 1 Phase 3 Wire is the standard for homes and 240V 3 Phase Open Delta is the standard for small buildings with large loads. In parts of the world 240V Single Phase 2 Wire is the standard for homes. 8. What is the value of 3 phase voltage? 3 phase system is expressed with line voltages. The line votage is 440 volt. Also the voltage between any one phase and neutral for a 3 phase system is 240 volts. 9. What is single-phase power used for? Single-Phase Power generates electricity to residential homes and domestic supplies, since most appliances require only a small amount of power to function, including fans, heaters, television, refrigerator, and lights. 10. Why does single phase have 2 wires? Two hot wires and one neutral wire provide the power. Each hot wire provides 120 volts of electricity. The neutral is tapped off from the transformer. A two-phase circuit probably exists because most water heaters, stoves and clothes dryers require 240 volts to operate. 11. Can we use 2 AC in single phase? You can, yes. The main MCB has a current rating of at least 25 ampere. If you use 1.5 ac, it has max load current of 7 to 8 amperes for a single ac, and the MCB size is to be selected. 12.Is 240 volt single-phase? Single Phase 120/240 It may also be called Split Phase 240. This configuration consists of 2 voltage legs that are 180 degrees apart. The voltage between the two legs (called phase to phase or line to line) is 240V and the phase to neutral voltage is 120V.  

Ⅰ IntroductionA motion sensor is a kind of security system. And the linchpin of your security system is a motion sensor (or motion detector) as it detects when someone is in your home who should not be there. A motion sensor detects movement in an area with one or more technologies.When a sensor detects motion, it sends a signal to the control panel of your security system, which is connected to your monitoring center. This notifies you and the monitoring center that there is a potential threat in your home.CatalogⅠ IntroductionⅡ Motion Sensor Related Video:Ⅲ What is a Motion Sensor?Ⅳ Types of Motion SensorsⅤ How do Active Ultrasonic Sensors and Passive Infrared (PIR) Work?5.1 Active Ultrasonic Sensors5.2 PIR SensorsⅥ How to Install a Motion Sensor?Ⅶ Other Uses for Motion SensorsⅧ FAQ Ⅱ Motion Sensor Related Video:How PIR Sensor Works and How To Use It with ArduinoMotion Sensor Video Description：In this Arduino Tutorial we will learn how a PIR Sensor works and how to use it with the Arduino Board for detecting motion. Ⅲ What is a Motion Sensor?A motion sensor (or motion detector) is a genre of electronic device that detects and calculates movement. We can often find motion sensors in the home and business security systems,  as well as in phones, paper towel dispensers, game consoles, and virtual reality systems. Unlike many other types of sensors, motion sensors can not be handled and isolated as they are in embedded systems comprised of three major components: a sensor unit, an embedded computer, and hardware (or the mechanical component). Because motion sensors can be customized to perform highly specific functions, these three parts vary in size and configuration. Motion sensors, for example, can be used to activate floodlights, sound audible alarms, activate switches, and even alert the police. Figure1: Motion SensorⅣ Types of Motion SensorsActive Ultrasonic SensorsActive sensors have a transmitter as well as a receiver. This sensor detects motion by measuring changes in the amount of sound or radiation that is reflected back into the receiver. Passive infrared (PIR)A passive infrared sensor detects body heat (infrared energy) by monitoring temperature changes. This is the most common type of motion sensor found in home security systems. Figure2:Passive infrared (PIR) Microwave (MW)This type of sensor emits microwave pulses and detects reflections from moving objects. 1 They have a larger coverage area than infrared sensors, but they are more expensive and susceptible to electrical interference. Figure3:Microwave (MW) Dual technology motion sensorsThis type of sensor emits microwave pulses and detects reflections from moving objects. 1 They have a larger coverage area than infrared sensors, but they are more expensive and susceptible to electrical interference. Figure4: Dual technology motion sensorsEach sensor type operates in a different part of the electromagnetic spectrum (ranging from passive to active). Dual technology motion sensors are less likely to cause false alarms than other types because both sensors must trip to sound an alarm. This is not to say that they never cause false alarms. Less common types of motion detectorsTomographic motion sensors are composed of several nodes. The nodes connect to form a mesh network. When the link between two nodes is broken, these sensors detect the presence of a person or object.Vibration motion sensors detect people and objects by detecting small vibrations caused by movements such as footsteps. Ⅴ How do Active Ultrasonic Sensors and Passive Infrared (PIR) Work?The two most common motion sensor technologies are active ultrasonic sensors and passive infrared sensors, both of which are well-known for their accuracy and dependability.5.1 Active Ultrasonic SensorsActive ultrasonic sensors produce ultrasonic sound waves that are higher in frequency than the human hearing range. These waves are bouncing off nearby objects and returning to the motion sensor. A transducer within the sensor serves as a signal waypoint, sending the pulse and receiving the echo. The sensor calculates the distance between itself and the target by measuring the time between signal transmission and reception. Most motion sensors allow you to adjust the sensitivity, which means it won't trigger if the distance between the sensor and the object is too great. If the received signal falls within the specified parameters, the motion sensor will activate, alerting you that someone or something is close to the sensor.Motion sensors installed at entry points such as windows and doors can be programmed to sound a burglar alarm. Door and window sensors are specifically designed to detect an intruder, so you should not experience false alarms or excessive notifications.Ultrasonic sensors are capable of detecting objects regardless of color, surface type, or material type (i.e., metallic vs. non-metallic). They can detect translucent objects as well, though this is typically reserved for industrial applications.Figure5:Active ultrasonic sensors 5.2 PIR SensorsPIR sensors are more complicated than active ultrasonic sensors, but the results are the same.Walls, floors, stairwells, windows, cars, dogs, trees, people—you name it—emit heat. Temperature can be detected using infrared waves. Infrared motion sensors detect the presence of a person or object by measuring the temperature change in a specific area. 5.3 Example of PIR SensorsTo demonstrate how this works, we'll use a motion detection camera, though any PIR motion sensor will do.A PIR camera contains two sensors. When no one is present, the PIR camera detects ambient IR emitted by background objects such as walls and doors. When a person (or animal, object, etc.) moves in front of the camera, the first sensor detects their heat signature, causing the camera to activate, triggering your alarm, and sending you an alert. If the object moves out of the camera's field of view, the second sensor will activate, noting the sudden drop in temperature.These temperature changes are used by a PIR motion sensor to detect the presence of a person or object. PIR sensors, like active ultrasonic sensors, can be configured to ignore small changes in IR, allowing you to walk around your home or business without setting off alarms all day and night. Ⅵ How to Install a Motion Sensor?Typical motion sensors have a range of up to 80 feet, which means that a single sensor will most likely not cover a long hallway or an open workspace. You can have your security system installed by a security company such as Bay Alarm. Our installers will examine the layout of your space to determine the best location for motion sensors. Our goal, as with security cameras, fire alarms, and burglar alarm installations, is to make your home or business as secure as possible, with devices and components strategically placed.After the sensors have been installed, a security agent will integrate them with your burglar alarm system. Using one of two apps: SureHome by Bay Alarm or Bay Alarm Access, you'll have quick access to your entire security system from your phone.If you decide to do your own security, make sure to follow the instructions that come with the sensor. Here are some pointers for installing motion detectors in your home or business: Step1:Take your motion detector out of the box.Your motion sensor kit should include instructions as well as mounting hardware. If your device has separate batteries, insert them into your motion sensor now. Step2:TDecide on a locationCorners are ideal because they allow you to position infrared sensors to cover the most ground. Most motion sensor designs have angled edges with screw holes to fit neatly into a room's corner.Mount your motion detector high on the wall to get the best coverage—but avoid putting it over a large piece of furniture, like a bookshelf or entertainment center, because it will limit the passive infrared energy range.Mount your motion sensor opposite the main entrance—this applies in every room or hallway where you place these sensors so they can detect intruders right away. Step3:Mount the sensorBecause passive infrared sensors are lightweight, you won't need drywall anchors or studs. A standard screwdriver will suffice, but an electric screwdriver or drill will expedite the process.Most motion detectors include a mounting bracket that detaches from the main body of the device, allowing you to screw it into the wall first, then clip the motion sensor back in. This also makes removing the motion detector from the wall during maintenance easier. Other infrared sensors may necessitate a complete disassembly before mounting. Step3: Connect your sensor to your systemConnect your motion sensor to your system according to the manufacturer's instructions. Most DIY systems will walk you through this process, frequently using the main keypad or a mobile app to configure and adjust your motion detectors.TIPS: Z-Wave-enabled smart motion sensors connect to your phone for easy access and notifications. Whether you're just getting started with your smart home build or you already have dozens of connected devices, Z-Wave-enabled motion sensors are a worthwhile addition. Step4: Adjust your motion detection settingsWhen you arm your system, most motion detectors have three main settings:In instant mode, any movement sets off an alarm.In entry delay mode, the sensor operates on a delay; even if it detects motion, you have approximately 30–60 seconds to disarm the system before an alarm is triggered.Interior follow-up mode operates on an entry delay, but only when the door contact triggers first—it sounds an instant alarm if it detects motion in the home without the door contact triggering. Step6: Maintain your motion detectorDust and debris can accumulate on the screen of your motion sensor over time, interfering with the infrared energy and making it less effective at motion detection. Use a dry or slightly damp microfiber cloth to clean it at least once every couple of months.If you decide to paint a wall near your motion sensor, make sure to first remove the device. If paint gets on a passive infrared motion sensor, it must be replaced. Additional tips for installing motion sensorsTake into account the size of your pets.Overhangs reduce range.Do not obstruct the infrared.Not all motion sensing light switches are created equal. Ⅶ Other Uses for Motion SensorsMotion sensors are useful for more than just home security. Many industrial fields use them on assembly lines to count the number of products and to shut down dangerous equipment if someone gets too close.Here are a few other uses for motion sensorsTo automate the opening and closing of doorsTo activate and deactivate automatic water faucets and toiletsWhen a person enters a room, lights are turned on.ATM display controlAt ticket vending machinesFor certain parking meter Ⅷ FAQ1. Which motion sensor is best?Best Motion SensorsPhilips. Hue Smart Motion Sensor. A solid choice if you are looking for a motion sensor for indoor use that's also intuitive. ...First Alert. Motion Sensing Light Socket. ...SadoTech. Wireless PIR. ...Chamberlain. Wireless Motion Sensor. ...1byone. Safety Driveway Patrol.2. Are motion sensors effective?Motion sensors are proven to be effective at leading to apprehensions. ... Motion sensors can be more cost-effective for rooms with many windows that would require several sensors to protect. A motion detector can alert you immediately if there is movement is detected.3. What can set off a motion detector?What can set off a motion detector? Moveable objects such as balloons, curtains, decorations, and pets can set off motion detectors. How to prevent this: Consider positioning motion sensors above waist level so pets can move around freely, and away from curtains and other items that may move or drift.4. Do motion detectors work in the dark?The short answer is yes. Motion sensors do work in complete darkness, as none of the motion sensors mentioned above are reliant on using images to detect motion. Instead of images, PIR motion sensors detect changes in the level of received infrared. Likewise, ultrasonic motion sensors also do not require images.5. How long do motion sensors last?On average, a motion detector light will stay on for up to 20 minutes. That amount of time is extended each time a sensor detects fresh movement, so it is possible for a motion detector light to stay on for much longer than 20 minutes at a time.6. Does motion sensor have camera?Most smart security cameras are motion sensor cameras. This means that they have a smart sensor built-in – and that's the key to your smart camera always being ready to record when something happens.7. What is the difference between PIR and motion sensor?As the name implies, motion sensors detect moving objects outside or even inside your home. They are often tied to lights, alarms, security cameras, and most recently, smart doorbells. ... PIR or Passive Infrared motion sensors are designed to reliably detect people, large pets & other large warm moving objects. 

To some, DC DC converters are relatively simple electronic devices that serve a basic purpose. This is not entirely accurate, however, as such converters are far more complex and are playing an increasingly influential role in the defense sector in the modern age. This is thanks largely to the rising threat of cyber-crime and identity theft, which has created considerable challenges for businesses and public-sector bodies alike. In this article, we will look at the growing importance of DC DC converters and the way in which they can be integrated with the Internet of Things (IoT).Catalog I. What Is a DC DC Converter, and How Does It Work With the IoT?II. How Does This Reinforce the Defense Against Cyber Crime and Increase Security?III. Why DC DC Converters Will Become Even More Important In the FutureFAQ I. What is a DC DC Converter & How Does It Work With the IoT? In simple terms, a DC DC converter is an electromechanical device or electronic circuit that converts a source of direct current from one voltage level to another. An advanced type of power converter, it is available in many flexible designs and has found several applications in the digital age. Make no mistake—it is the IoT and the concept of an unceasingly interconnected world that has reinforced the importance of DC DC converters.  After all, the IoT comprises a vast network that bridges the gap between the corporeal and the virtual worlds, while connecting a growing number of devices and apps.  The function of the IoT requires flexible power solutions and stable voltages that are resilient to potential interruptions, from geo-location systems to smart technology innovations and platforms. The rise of the IoT has also driven the development of wireless sensor nodes, which typically have short battery lives and have forced innovators to seek out ultra-low-power, integrated circuits. Modern DC DC converters, such as those sold by businesses like XP Power, are ideally suited to meeting this demand, extending the battery life of IoT nodes and driving more reliable integration between devices.II. How Does This Reinforce the Defense Against Cyber Crime and Increase Security? By optimizing individual connections and guaranteeing a viable power source to IoT nodes, DC DC converters can create a more secure network that protects people's homes, devices, and private data.  If you take smart locking and home security systems, for example, these rely on a sustainable and continuous power resource to devices and integrated sensors. Without this, these systems can prevail and become increasingly vulnerable, and this is an issue that DC DC converters can help to resolve. The increased battery life of IoT nodes can also guarantee the safe and seamless delivery of data between devices, particularly when it is shared between online and offline devices.  The last thing you want is to send sensitive or private data between devices, only to lose power or the underlying connection, as this may create gaps in communication or ultimately leave your information at risk.  This is an important consideration and one that underlines the importance of DC DC converters in the digital age.III. Why DC DC Converters Will Become Even More Important in the Future? For now, the IoT remains a relatively new concept that has yet to reach its full potential. As the network grows to include more devices, and as the connection between the corporeal and virtual worlds becomes increasingly prominent, the need for flexible power and sustainable IoT nodes will become far more pressing.  Fortunately, DC DC converters will continue to evolve to meet these needs and will underpin a technological evolution that will revolutionize the world in which we live.   FAQ 1. What does a DC-DC Converter do?As its name implies, a DC-DC converter converts one DC voltage to another. The operating voltage of different electronic devices such as ICs can vary over a wide range, making it necessary to provide a voltage for each device. 2. What are the types of DC to DC converter?Types and Characteristics of DC/DC Converters:Non- Isolated types: Basic (one coil) type. Capacity coupling (two-coil) type ―― SEPIC, Zeta, etc. Charge pump (switched capacitor/coil less) type.Isolated types: Transformer coupling types―― Forward transformer type. Transformer coupling types―― Fly-back transformer type. 3. Is there a DC transformer?Transformers do not pass direct current (DC), and can be used to take the DC voltage (the constant voltage) out of a signal while keeping the part that changes (the AC voltage). ... In the electrical grid transformers are key to changing the voltages to reduce how much energy is lost in electrical transmission. 4. Which IC is used in DC to DC converter?NCP3064.NCP3064 is a monolithic DC-DC voltage converter IC mainly used for Boost or Buck operation. This IC can be found in low voltage power supplies or any portable voltage converters. 5. What are the advantages of DC-DC converter fed dc drives?DC chopper device has the advantages of high efficiency, flexibility in control, light weight, small size, quick response and regeneration down to very low speed. 6. How do you convert low DC to high DC?A DC-to-DC converter is an electronic circuit or electromechanical device that converts a source of direct current (DC) from one voltage level to another. It is a type of electric power converter. Power levels range from very low (small batteries) to very high (high-voltage power transmission). 7. Why we need dc/dc converter explain with an example?DC-DC converters are high-frequency power conversion circuits that use high-frequency switching and inductors, transformers, and capacitors to smooth out switching noise into regulated DC voltages. Closed feedback loops maintain constant voltage output even when changing input voltages and output currents. 8. Can DC be stepped up or down?Yes, DC can be steped up and steped down. But it cannot be done just by using a transformer, like how it is done with AC. We use a specialised device called a DC to DC converter, that can step up or step down DC. 9. How do you convert 12V DC to 4v DC?Two ways to reduce a 12-volt system to 4 volts are to use voltage dividers or Zener diodes. Voltage dividers are made from resistors placed in series. The input voltage is divided into an output that depends on the value of the resistors used. 10. How do I make a dc/dc converter?Once the initial specs of a DC-DC design are selected (e.g., input voltage range, output voltage, output current), the first step is to select a converter IC. The desired DC-DC topology will narrow this choice. If the input voltage is greater than the output voltage, choose a buck (i.e., step-down) topology. Ref. KY68-DS1200DKY68-R2880KY68-PYB10-Q24-S3-Ua 

Researchers at the University of Alabama at Birmingham have found a novel and practical way to combat malicious attacks on motion sensors inside mobile devices.In a study published in proceedings of the 9th Association for Computing Machinery Conference on Security & Privacy in Wireless and Mobile Networks, associate professor Nitesh Saxena, Ph.D., and Ph.D. students Prakash Shrestha and Manar Mohamed have created a way to defend mobile device users against motion-based touchstroke leakage with the injection of noise.Previous research shows that, much like the way a hacker can covertly capture inputs made from a regular computer keyboard, it is also possible to capture a user's inputs on a touchscreen. Currently, motion sensors on Android devices can be accessed by any application downloaded to the device, without a user's being prompted to give permission. By tricking a user into unknowingly downloading a malicious program, hackers could obtain sensitive information like passwords and PINs by tracking the vibrations made from the touchscreen and decoding the movements based on a keyboard's layout. Given the accuracy rate of this type of attack, mobile security experts consider it a significant threat to user privacy and are exploring methods to combat it."Most mobile platforms have established a sensor security access control model," Saxena said. "Android follows a model where read access to many sensitive sensors, like a phone's camera or microphone, is very restrictive or requires special permissions granted by the user. However, the read access to other sensors, like inertial sensors, is not restricted because Android may not consider these sensors explicitly sensitive. This openness in the Android sensor security architecture has given rise to potentially significant threat of motion-based side channel attacks."By utilizing a recently developed framework called SMASheD (Sniffing and Manipulating Android Sensor Data), initially created as a malicious application, the study's authors built a defense mechanism called Slogger that can be used to thwart sensor-based touchstroke logging attacks. As a user enters sensitive information, Slogger transparently inserts noisy sensor readings in order to obscure the original readings. Slogger works in the background of a device and is completely unnoticeable to a user and other trusted applications. It can be installed through the Android Debug Bridge, without the need to root the device or change its operating system.To test Slogger's effectiveness, the authors compromised an Android device using two of the latest touchstroke logging algorithms developed for touchstroke detection and inference. During this type of attack, the start and end points of a user's taps are monitored. With data recorded by the accelerometer, a hacker could determine whether a user is holding the device vertically or horizontally. They can also predict what areas of the screen were tapped by applying machine learning tools. Later, by mapping the predicted areas with the standard keyboard layout, a hacker can determine the series of taps.After installing the malicious application, the authors also installed Slogger. Upon being installed, Slogger prompts the user to do a series of typing tests, holding the device in various positions. This allows Slogger to learn the range of the sensor values based on the user's typing style. The user types while holding the phone in his or her hand and while it is lying on a flat surface. The values are later used to set the range of values for injecting noise during an attack."During the evaluation phase, we implemented Slogger in such a way that, whenever the user launches the application used for the attack, a noise inject request is sent to the Slogger server," Saxena said. "When the user closes the application, a request to stop Slogger is sent. The application can also be updated to send an inject request whenever the keyboard is running or whenever a user is entering sensitive information."Slogger searches for system files related to motion sensors such as an accelerometer or gyroscope, and injects noise until it receives a request to stop, like when the application being used for the malicious attack is closed. Without Slogger, the touchstroke detector had an 85 percent rate of accuracy. Once the Slogger application was enabled, the touchstroke detector was unable to detect any touchstrokes. During the touchstroke inference test, there was a 90 percent accuracy rate without Slogger. Slogger was able to reduce inference accuracy to 56 percent while the device lay on a flat surface. While the user held the device, inference accuracy was reduced by more than 20 percent.During the evaluation, the authors discovered Slogger was also highly effective in minimizing touchstroke leakage even when more than one motion sensor is leveraged by an attacker.