ic Related Articles
Stay Ahead with Expert Electronics Insights,
Industry Trends, and Innovative Tips
- Electronic Components
- News Room
- General electronic semiconductor
- Components Guide
- Sort by
- Robots
- Transmitters
- Capacitors
- IC Chips
- PCBs
- Connectors
- Amplifiers
- Memory
- LED
- Diodes
- Transistors
- Battery
- Oscillators
- Resistors
- Transceiver
- RFID
- FPGA
- Mosfets
- Sensor
- Motors, Solenoids, Driver Boards/Modules
- Relays
- Optoelectronics
- Power
- Transformer
- Fuse
- Thyristor
- potentiometer
- Development Boards
- RF/IF
- Semiconductor Information
- Sensors
- PCB
- transistor
A spintronic device measuring just 375 nm across has been used to recognize human speech. The device is a spintronic oscillator, which behaves much like a neuron in the brain. Created by physicists in France, Japan and the US, the system is described as the first neuromorphic computer that is based on a nanoscale device.Neuromorphic computers try to emulate the human brain. As well as having the potential to be faster and more energy efficient than conventional computers, they could also excel at learning how to perform certain tasks – rather than being pre-programmed to do so. A spintronic oscillator comprises a non-magnetic layer of material sandwiched between two ferromagnetic layers – with each ferromagnetic layer being magnetized in a different direction. A voltage is applied to the device, causing a spin-polarized current to flow from one magnetic layer, across the non-magnetic layer, and into the second magnetic layer. This exerts a torque on the second magnetic layer, causing its magnetization to precess at microwave frequencies. This precession is monitored in terms of an oscillating voltage that develops across the device. Nonlinear response A minimum current is required for these oscillations to occur. As the current rises above this threshold, the amplitude of the oscillating voltage increases as the square root of the current. This current threshold and nonlinear response is similar to the behaviour of neurons, which is one reason why spintronic oscillators show promise for making neuromorphic computers.The speech-recognition system was created by Julie Grollier and colleagues at Université Paris-Sud and Université Paris-Saclay, the National Institute of Advanced Industrial Science and Technology in Tsukuba and the National Institute of Standards and Technology, Gaithersburg, Maryland.The process begins with a spoken word being captured by a microphone, digitized and then pre-processed to create an electrical current. This current is then fed into a spintronic oscillator, creating an oscillating voltage that is then analysed by a computer running a machine-learning program. State-of-the-art performance The team looked at how the system is able to recognize the numbers 0–9 when spoken by several different people. When the input signals were pre-processed using a "nonlinear cochlear filter" – the standard in such applications – the system achieved a recognition rate of 99.6%. Writing in Nature, the team describes this as a "state-of-the-art" performance that is normally achieved using much more complicated systems. As well as being sub-micron in size, the oscillators can be made using the same fabrication methods as conventional computer chips. This, says the team, could allow one hundred million oscillators to fit on a thumb-sized chip. The researchers also point out that unlike other nanoscale oscillators, spintronic oscillators offer low noise operation, high stability and low energy consumption. Source: Hamish Johnston, the editor of physicsworld.comRef.ECS-2200B-500P122-156.25M
kynix On 2017-08-16
When designing a custom lighting solution, there are many different goals to take into consideration. One of the most essential may be reducing the power supply needs of the system. Doing so can provide further benefits, such as improving reliability and expected shelf life, and reducing space and size constraints. Benefits often come with tradeoffs; traditionally, when you reduce power you may need to reduce brightness at the same time. The good news is that this doesn’t always have to be the case. GLOBAL LIGHTING TECHNOLOGIES have compiled a list of five smart ways that you can reduce power without sacrificing LED brightness. 1. LED efficiencyHow do you do more with less? It's all about efficiency, and choosing more efficient LEDs can make a world of difference. Choosing a more efficient LED may seem like a more expensive option, but keep in mind that it’s not just about the cost of the LED - what you should really be considering is the cost per Lumen of output. A more efficient LED is actually more cost-effective, while simultaneously helping reduce power needs. 2. Lightguide material efficiencyAny light which is absorbed by the lightguide material is light that the actual display is losing. Therefore, switching to a material with a higher transmissivity to improve efficiency and it will aid in the retention of more light. 3. LED driver circuitBy utilising a highly efficient LED driver circuit, you can prevent power loss and improve the end result. This is often overlooked, as many engineers design circuits which use resistors to reduce voltage and match current to the LEDs. You can prevent those power losses from occurring by using custom designed LED driver chips and circuits with improved efficiency. 4. Lightguide extraction efficiencyAnother area where efficiency can be improved is with extraction, and by doing so more light is able to reach the user’s target area. In turn, power can also be reduced. Our innovative extraction technology offers higher efficiency and overall improved extraction, helping to achieve this goal. 5. LightguidesThe job of a lightguide is to take the light from the LED and spread it out uniformly over the surface being illuminated. With the right design and technology, a custom lightguide can actually conserve most of the initial LED efficiency while greatly increasing uniformity of the display, offering the best of both worlds. Ref.KY32-HV9921N3KY32-MIC2287CBD5KY32-LNK456DG
kynix On 2017-08-15
The simplest semiconductor component, the diode, has an astonishing number of applications that are enabled by a number of practical and unique types of diodes that are vital in modern electronics.Now let's get start to learn about diodes. Applications of Diodes While only two pin semiconductor devices, there are a number of applications of diodes that are vital in modern electronics. Diodes are known for only allowing current to move in one direction through the component. This lets a diode acts as a one-way valve, keeping signals where they need to be or routing them around components. While diodes only let current move in one direction, each type of diode acts differently, making a number of useful applications for diodes. Some of the typical applications of diodes include: · Rectifying a voltage, such as turning AC into DC voltages · Isolating signals from a supply · Voltage Reference · Controlling the size of a signal · Mixing signals · Detection signals · Lighting ·Lasers diodes Power Conversion One significant application of diodes is to convert AC power to DC power. A single diode or four diodes can be used to transform 110V household power to DC by forming a half-way (single diodes) or a full-wave (four diodes) rectifier. A diode does this by allowing only half of the AC waveform to travel through it. When this voltage pulse is used to charge a capacitor, the output voltage appears to be a steady DC voltage with a small voltage ripple. Using a full wave rectifier makes this process even more efficient by routing the AC pulses so both the positive and negative halves of the input sine wave are seen as only positive pulses, effectively doubling the frequency of the input pulses to the capacitor which helps keep it charged and deliver a more stable voltage. Diodes and capacitors can also be used to create a number of types of voltage multipliers to take a small AC voltage and multiply it to create very high voltage outputs. Both AC and DC outputs are possible using the right configuration of capacitors and diodes. Demodulation of Signals The most common use for diodes is to remove the negative component of an AC signal so it can be worked with easier with electronics. Since the negative portion of an AC waveform is usually identical to the positive half, very little information is effectively lost in this process. Signal demodulation is commonly used in radios as part of the filtering system to help extract the radio signal from the carrier wave. Over-Voltage Protections Diodes also function well as protection devices for sensitive electronic components. When used as voltage protection devices, the diodes are non-conducting under normal operating conditions but immediately short any high voltage spike to ground where it cannot harm an integrated circuit. Specialized diodes called transient voltage suppressors are designed specifically for over-voltage protection and can handle very large power spikes for short time periods, typical characteristics of a voltage spike or electric shock, which would normally damage components and shorten the life of an electronic product. Current Steering The basic application of diodes is to steer current and make sure it only flows in the proper direction. One area where the current steering capability of diodes is used to good effect is in switching from power from a power supply to running from a battery. When a device is plugged in and charging, for example, a cell phone or uninterruptible power supply, the device should be drawing power only from the external power supply and not the battery and while the device is plugged in the battery should be drawing power and recharging. As soon as the power source is removed, the battery should power the device so no interruption in noticed by the user. Ref. MN3306 MURB1520 SBG1030L-T-F
kynix On 2017-08-11
LMX3268VBHXThe International Labor Organization (ILO) points out that some 40 million tons of electronic waste (including computers, mobile phones, printers, etc.) are produced every year. The prospect is that this amount will increase even more over time, as electronic devices with new functions and more attractive designs are constantly appearing, stimulating new purchases from the consumer without the old product being out of date. Being present is most electronic devices, Printed Circuit Boards, also known as PCBs, are among the most discarded parts. They are made up of a plastic board and fibrous materials (such as plastic polymers) and a thin film of metallic substance (copper, silver, gold or nickel). These films form “tracks” or “paths” that will be responsible for the electrical conduction done by the electronic components. They can also have other materials in their composition, such as alloys, which have distinct melting points, thus allowing for manipulation and arrangement. There are several alloys available to be used, such as cerrobend, low melting point alloy or fusible alloys. Recycling electronic waste is much needed, because of the chemical components in its composition, with some of them being toxic – they can cause problems if they are disposed of incorrectly. For PCBs specifically, their recycling process involves quite some steps. Mechanical processesIt starts with a pre-treatment system that aims to separate metals, polymer materials and ceramics. After this step, the metals are sent to the metallurgical refining process. The techniques that make up this process are: comminution, classification and separation. Comminution is the technique used to reduce particle size and release metals for future concentrations. In the classification step, the material particles obtained by the previous process must be separated or classified according to their size. After the steps of comminution and classification, the enrichment of the material takes place by means of separation techniques: the parts that are interesting for the refining process of the metal are separated, discarding any impurities. In the case of circuit boards, the difference in electrical conductivity between metals and non-metals is a fundamental condition for the good result of the technique. Non-conductive materials (polymers and ceramics) can be separated from conductors (metals). Some techniques employed for this purpose are explained below. Pyrometallurgy processIt is a metallurgical process that uses high temperatures to produce pure metals, alloys or intermediate compounds. Pyrometallurgy requires high energy consumption to reach the appropriate temperatures for each stage of the process. There are several steps in the process, from the drying of the raw material to the refining of the final product. The chemical transformation step to be used will depend on the material in question. The best known are calcination (decomposition by heat in the presence of oxygen), roasting (calcination applied to sulphides) and pyrolysis (decomposition by the action of heat in an environment with little or no oxygen). Some of the major problems in the use of pyrometallurgical processes are the possibility of emission of toxic compounds such as dioxins and the high energy consumption. Hydrometallurgy processIt consists of the separation of metals. Some of the advantages of this method are the energy savings and the lower pollution of the environment. Electrometallurgy processIt is a process of refining metals through electrolysis. During electrolysis, metals without the impurities undergo electrodeposition, in which metals such as copper, zinc, cadmium, aluminum, precious metals, among others, can be recovered with a high degree of purity; Biometallurgy processThis process uses the action of microorganisms and minerals to recover valuable metals. This process requires a lot of time and metal needs to be exposed to microbial action. Where to recycle?If your computer and its PCBs are not broken but only technologically lagged, look for specialized places that accept donations of these items. You can also resell those components on the Internet, for example. However, and regardless of the final decision, always be sure that the final destination to be given to these materials is a proper one, always avoiding to harm the environment. Ref.IC ChipsPCB2B12ALMZ12001EXT
kynix On 2017-08-09
Engineers at the University of Maryland have invented an entirely new kind of battery. It is bio-compatible because it produces the same kind of ion-based electrical energy used by humans and other living things.In our bodies, flowing ions (sodium, potassium and other electrolytes) are the electrical signals that power the brain and control the rhythm of the heart, the movement of muscles, and much more. In traditional batteries, the electrical energy, or current, flows in form of moving electrons. This current of electrons out of the battery is generated within the battery by moving positive ions from one end (electrode) of a battery to the other. The new UMD battery does the opposite. It moves electrons around in the device to deliver energy that is a flow of ions. This is the first time that an ionic current-generating battery has been invented. "My intention is for ionic systems to interface with human systems," said Liangbing Hu, the head of the group that developed that battery. Hu is a professor of materials science at the University of Maryland, College Park. He is also a member of the University of Maryland Energy Research Center and a principal investigator of the Nanostructures for Electrical Energy Storage Energy Frontier Research Center, sponsored by the Department of Energy, which funded the study. "So I came up with the reverse design of a battery," Hu said. "In a typical battery, electrons flow through wires to interface electronics, and ions flow through the battery separator. In our reverse design, a traditional battery is electronically shorted (that means electrons are flowing through the metal wires). Then ions have to flow through the outside ionic cables. In this case, the ions in the ionic cable -- here, grass fibers -- can interface with living systems." The work of Hu and his colleagues was published in the July 24 issue of Nature Communications. "Potential applications might include the development of the next generation of devices to micro-manipulate neuronal activities and interactions that can prevent and/or treat such medical problems as Alzheimer's disease and depression," said group member Jianhua Zhang, PhD, a staff scientist at the National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK), part of the National Institutes of Health in Bethesda, Md. "The battery could be used to develop medical devices for the disabled, or for more efficient drug and gene delivery tools in both research and clinical settings, as a way to more precisely treat cancers and other medical diseases, said Zhang, who performed biological experiments to test that the new battery successfully transmitted current to living cells.. "Looking far ahead on the scientific horizon, one hopes also that this invention may help to establish the possibility of direct machine and human communication," he said. Bio-compatible, bio-material batteries Because living cells work on ionic current and existing batteries provide an electronic current, scientists have previously tried to figure out how to create biocompatibility between these two by patching an electronic current into an ionic current. The problem with this approach is that electronic current needs to reach a certain voltage to jump the gap between electronic systems and ionic systems. However, in living systems ionic currents flow at a very low voltage. Thus, with an electronic-to-ionic patch the induced current would be too high to run, say, a brain or a muscle. This problem could be eliminated by using ionic current batteries, which could be run at any voltage. The new UMD battery also has another unusual feature -- it uses grass to store its energy. To make the battery, the team soaked blades of Kentucky bluegrass in lithium salt solution. The channels that once moved nutrients up and down the grass blade were ideal conduits to hold the solution. The demonstration battery the research team created looks like two glass tubes with a blade of grass inside, each connected by a thin metal wire at the top. The wire is where the electrons flow through to move from one end of the battery to the other as the stored energy slowly discharges. At the other end of each glass tube is a metal tip through which the ionic current flows. The researchers proved that the ionic current is flowing by touching the ends of the battery to either end of a lithium-soaked cotton string, with a dot of blue-dyed copper ions in the middle. Caught up in the ionic current, the copper moved along the string toward the negatively charged pole, just as the researchers predicted. "The microchannels in the grass can hold the salt solution, making them a stable ionic conductor," said Chengwei Wang, first author of the paper and a graduate student in the Materials Science and Engineering department at the University of Maryland in College Park. However, the team plans to diversify the types of ionic current electron batteries they can produce. "We are developing multiple ionic conductors with cellulose, hydrogels and polymers," said Wang. This is not the first time UMD scientists have tested natural materials in new uses. Hu and his team previously have been studying cellulose and plant materials for electronic batteries, creating a battery and a supercapacitor out of wood and a battery from a leaf. They also have created transparent wood as a potentially more energy-efficient replacement for glass windows. Creative Work Ping Liu, an associate professor in nanoengineering at the University of California, San Diego, who was not involved with the study, said: "The work is very creative and its main value is in delivering ionic flow to bio systems without posing other dangers to them. Eventually, the impact of the work really resides in whether smaller and more biocompatible junction materials can be found that then interface with cells and organisms more directly and efficiently." Source:University of Maryland Ref.ML-621S/ZTNMS412FE-FL26E
kynix On 2017-08-03
(Metal-semiconductor-metal junction (tunnel barrier) incorporated into a single graphene nanoribbon: The atomic and electronic structure of the nanoribbons can be probed with atomic resolution using advanced microscopic techniques.) Essential electronic components, such as diodes and tunnel barriers, can be incorporated in single graphene wires (nanoribbons) with atomic precision. The goal is to create graphene-based electronic devices with extremely fast operational speeds. The discovery was made in a collaboration between Aalto University and their colleagues at Utrecht University and TU Delft in the Netherlands. The work is published in Nature Communications. The 'wonder material' graphene has many interesting characteristics, and researchers around the world are looking for new ways to utilise them. Graphene itself does not have the characteristics needed to switch electrical currents on and off and smart solutions must be found for this particular problem. "We can make graphene structures with atomic precision. By selecting certain precursor substances (molecules), we can code the structure of the electrical circuit with extreme accuracy," explains Peter Liljeroth from Aalto University, who conceived the research project together with Ingmar Swart from Utrecht University. Seamless integration The electronic properties of graphene can be controlled by synthesizing it into very narrow strips (graphene nanoribbons). Previous research has shown that the ribbon's electronic characteristics are dependent on its atomic width. A ribbon that is five atoms wide behaves similarly to a metallic wire with extremely good conduction characteristics, but adding two atoms makes the ribbon a semiconductor. "We are now able to seamlessly integrate five atom-wide ribbons with seven atom-wide ribbons. That gives you a metal-semiconductor junction, which is a basic building block of electronic components," according to Ingmar Swart. Chemistry on a surface The researchers produced their electronic graphene structures through a chemical reaction. They evaporated the precursor molecules onto a gold crystal, where they react in a very controlled way to yield new chemical compounds. "This is a different method from that currently used to produce electrical nanostructures, such as those on computer chips. For graphene, it is so important that the structure is precise at the atomic level and it is likely that the chemical route is the only effective method," Ingmar Swart concludes. Electronic characteristics The researchers used advanced microscopic techniques to also determine the electronic and transport characteristics of the resulting structures. It was possible to measure electrical current through a graphene nanoribbon device with an exactly known atomic structure. "This is the first time where we can create e.g. a tunnel barrier and really know its exact atomic structure. Simultaneous measurement of electrical current through the device allows us to compare theory and experiment on a very quantitative level," says Peter Liljeroth. Source:Aalto University Ref.MN3306STTH2002G-TR
kynix On 2017-08-02
Join our mailing list!
Be the first to know about new products, special offers, and more.
Feature Posts
How Resistors Work: From Basic Principles to Advanced Applications2025-07-30
DC Switching Regulators: Principles, Selection, and Applications2025-05-30
FPGA vs CPLD: In-depth Analysis of Architecture, Performance and Application2025-05-07
MOSFET Technology: Essential Guide to Working Principles & Applications2025-05-04
SMD Resistor: Types, Applications, and Selection Guide2025-04-30