asic Related Articles

Introduction Everyone has heard of FPGA more or less, such as Bitcoin mining, or Microsoft said before that it will use FPGA instead of CPU in the data center. So what exactly is it? Why use it? Compared with CPU, GPU, and ASIC, what are the characteristics of FPGA? FPGA is a chip that can reconfigure circuits and is a hardware reconfigurable architecture. Through programming, users can change its application scenarios at any time, and it can simulate various parallel operations of hardware such as CPU and GPU. By interconnecting with the high-speed interface of the target hardware, the FPGA can complete the low-efficiency part of the target hardware, thereby achieving acceleration at the system level. What Is an FPGA? Catalog Introduction Ⅰ FPGA vs CPU vs GPU vs ASIC Ⅱ Five Advantages of FPGA 2.1 Performance 2.2 Time-to-Market 2.3 Cost 2.4 Stability 2.5 Long-Term Maintenance Ⅲ New Applications of FPGA Ⅳ Development Trend of FPGA Ⅴ FAQ Ⅰ FPGA vs CPU vs GPU vs ASIC The core difference between FPGA and CPU, GPU, ASIC chips, etc. is that the connection and logic layout of the underlying operation unit are not solidified. Users can program the logic unit and switch array through EDA software to configure the function, so as to realize the integration of specific functions.FPGA appears as a semi-custom circuit in the field of application-specific integrated circuits (ASIC), which not only solves the shortcomings of custom circuits, but also improves the limited number of original programmable device gate circuits. Compared with ASIC chips, an important feature of FPGA is its programmable characteristics, that is, the user can specify the FPGA to realize a specific digital circuit through the program. Furthermore, FPGA chips are one of the best choices for small batch systems to improve system integration and reliability. Figure 1. FPGA Basic Structure So why is FPGA so fast? This is all because the computer's CPU(central processing unit) and GPU(graphics processing unit) belong to the von Neumann structure, with instruction decoding and execution, and shared memory. FPGAs, on the other hand, are instruction-free and memory-free architectures that make FPGA chips much more energy-efficient than CPUs or even GPUs. Figure 2. Von Neumann Structure In the von Neumann architecture, since the execution unit (such as the CPU core) may execute any instruction, so an instruction memory, a decoder, an operator of various instructions, and branch and jump processing logic are required. Due to the complex control logic of the instruction stream, it is impossible to have too many independent instruction streams. Therefore, the GPU uses SIMD (single instruction, multiple data) to allow multiple execution units to process different data at the same pace, and the CPU also supports SIMD instruction. The function of each logic unit of the FPGA has been determined during reprogramming, and no instructions are required. Figure 3. Computer CPU If the GPU is used for acceleration, in order to fully utilize the GPU computing, the batch size cannot be too small, and the delay will be on the order of milliseconds. Using FPGA to accelerate, only microsecond-level PCle delay is required. Why is FPGA so much lower latency than GPU? This is basically an architectural difference. FPGAs have both pipeline parallelism and data parallelism, while GPUs have almost only data parallelism (with limited pipeline depth).For example, FPGA chips can change the running hardware design on the chip every few seconds, while chips such as CPU and ASIC are already solidified when they leave the factory and cannot be changed. If ASIC, CPU, GPU, etc. are built buildings, and the routes of rooms, corridors, and stairs in the building have been fixed, while the interior of FPGA is similar to the magic staircase in Hogwarts, which can change the route of room to room at any time. In addition, FPGA does not need to compile the instruction system at the software application level like CPU and GPU. To program FPGA, use hardware description language, and directly compile and burn it into a combination of transistor circuits, that is, directly use transistor circuits to implement user algorithms.The biggest feature of FPGA is its flexibility. It can realize any digital circuit you want and can customize various circuits. Reduce the shackles of special chips, truly tailor-made for your own products, you can flexibly change the design during the design process, and have field programmability, so it is especially suitable for applications that require continuous changes in physical operation logic, such as AI algorithm optimization, data center applications, etc. Architecture Throughput（int ops） Delay Flexibility CPU ~1T N/A Very High GPU ~10T ~1ms High FPGA(Stratix V) ~1T ~1us High FPGA(Stratix 10) ~10T ~1us High ASIC ~10T ~1us Low The FPGA is set up by the RAM stored on the chip to reset its working state, so the on-chip RAM needs to be programmed when working. Users can use different programming methods according to different configuration modes, which can be said to be very flexible and convenient. The FPGA has the following configuration modes:🔺Parallel Mode: Parallel PROM, Flash configures FPGA.🔺Master-Slave Mode: One PROM configures multiple FPGAs.🔺Serial Mode: Serial PROM configures FPGA.🔺Peripheral Mode: The FPGA is used as a peripheral of the microprocessor and programmed by the microprocessor. Computational performance compared with CPU: For example, Stratix series FPGAs perform integer multiplication operations, and their performance is equivalent to that of a 20-core CPU, and for floating-point multiplication operations, their performance is equivalent to an 8-core CPU.Computational performance compared with GPU: FPGA performs integer multiplication and floating-point multiplication operations. There is an order of magnitude difference in performance compared to GPU. The computing performance of GPU can be approached by configuring multipliers and floating-point operation components. Figure 4. CPU and GPU Architecture Diagram The core advantage of FPGA for performing computation-intensive tasks: tasks such as search engine sorting and image processing have strict requirements on the return time limit of results, and it is necessary to reduce the delay of computing steps. Under the traditional GPU acceleration scheme, the data packet size is large, and the delay can reach the millisecond level. Under the FPGA acceleration scheme, the PCIe latency can be reduced to the microsecond level. Driven by long-term technology, the data transmission delay between CPU and FPGA can be reduced to less than 100 nanoseconds.The FPGA can build the same number of pipelines (pipeline parallel structure) for the number of data packet steps, and the data packets can be output immediately after being processed by multiple pipelines. The GPU data parallel mode relies on different data units to process different data packets, and the data units need to be input and output consistently. For stream computing tasks, the FPGA pipeline parallel structure has a natural advantage in latency. FPGA is used to process communication-intensive tasks and is not limited by network cards. It outperforms CPU solutions in terms of packet throughput and delay, and has strong delay stability. Therefore, FPGAs have obvious advantages over CPUs when performing large data processing tasks with high repetition rates.By programming the FPGA, the user can change the internal connection structure of the chip at any time to realize any logic function. Especially in industries with immature technical standards or rapid development and change, FPGA can effectively help enterprises reduce investment risks and sunk costs, and is a functional and economical choice. Figure 5. Computer GPU With the evolution of intelligent market demand, highly customized chips (ASIC SoC) have led to a sharp increase in market risks due to the large scale of non-repetitive investment and long R&D cycle. Relatively speaking, FPGA has advantages in the field of parallel computing tasks, and can replace some ASICs in the field of high performance and multi-channel. The demand for multi-channel computing tasks in the field of artificial intelligence (AI) drives the evolution of FPGA technology to the mainstream. Figure 6. ASIC SoC Ⅱ Five Advantages of FPGA 2.1 Performance Taking advantage of hardware parallelism, FPGAs break the sequential execution model and complete more processing tasks per clock cycle, surpassing the computing power of digital signal processors (DSPs). BDTI(Big Data Test Infrastructure), a well-known analysis and benchmarking company, has published benchmarks that show that in some applications, FPGAs can handle many times more processing power per dollar than DSP solutions. Controlling input and output (I/O) at the hardware level provides faster response times and specialized functionality to meet application needs. 2.2 Time-to-Market Despite increasing time-to-market constraints, FPGA technology offers flexibility and the ability to rapidly prototype. Users can test an idea or concept and complete verification in hardware without going through the lengthy manufacturing process of custom ASIC design. This allows users to make incremental modifications and iterate FPGA designs in hours, saving weeks. Commercial off-the-shelf (COTS) hardware provides different types of I/O connected to user-programmable FPGA chips. The increasing popularity of high-level software tools reduces the learning curve and abstraction layers, and often provides useful IP cores (pre-built functions) for advanced control and signal processing. 2.3 Cost The non-recurring engineering (NRE) cost of custom ASIC design far exceeds the cost of FPGA-based hardware solutions. The huge initial investment in ASIC design shows that OEMs need to ship thousands of chips each year, but more end users need custom hardware capabilities that enable the development of tens to hundreds of systems. The nature of programmable chips means that users can save on manufacturing costs as well as long lead times for assembly. System requirements change from time to time, but the cost of changing the FPGA design is negligible compared to ASCI's huge expense. 2.4 Stability Software tools provide the programming environment, and FPGA circuits are the real "hard" implementation of programming. Processor-based systems often contain multiple layers of abstraction that can schedule tasks and share resources among multiple processes. The driver layer controls hardware resources, while the operating system manages memory and processor bandwidth. For any given processor core, only one instruction can be executed at a time, and processor-based systems face the risk of tightly time-bound tasks taking over each other at all times. FPGAs, on the other hand, do not use an operating system, and have true parallel execution and deterministic hardware that focuses on each task, reducing the chance of stability issues. 2.5 Long-Term Maintenance As mentioned above, FPGA chips are field-upgradable without the time and expense involved in redesigning ASICs. For example, digital communication protocols contain specifications that can change over time, and ASIC-based interfaces can create maintenance and forward compatibility difficulties. Reconfigurable FPGA chips can accommodate future modifications. As a product or system matures, users can enhance functionality without spending time redesigning hardware or modifying board layouts.   Ⅲ New Applications of FPGA At present, the FPGAs mainly produced by Xilinx and Altera with the highest market share, which are all based on SRAM technology, and need to be connected to an external memory to save the program when in use. When powered on, the FPGA reads the data in the external memory into the on-chip RAM, and after completing the configuration, it enters the working state. When power off, the FPGA returns to a white chip, and the internal logic disappears. In this way, the FPGA can not only be used repeatedly, but also does not require a special programmer, but only a general EPROM and PROM programmer. So Actel, QuickLogic and other companies also provide FPGAs with anti-fuse technology, which can only be downloaded once. They have the advantages of anti-radiation, high & low temperature resistance, low power consumption and fast speed. They are widely used in military and aerospace fields. FPGA cannot be erased and written repeatedly, which is troublesome and expensive in the early stage of development. Lattice is the inventor of ISP technology, which has certain characteristics in small-scale PLD applications. Early Xilinx products generally did not involve military and aerospace markets, but now a number of products such as Q Pro-R have entered such fields.In the industrial field, FPGA chips are widely used in the industrial field, and are widely used in video processing, image processing, CNC machine tools and other fields to realize signal control and operation acceleration functions. With the development of intelligence and automation technology, the industrial field is gradually shifting from human resources as the core element to intelligent unmanned factories with automation as the core element.Smart electric vehicles will be the mainstream development direction of the automotive industry in the future. At present, the application of FPGA in automotive cameras and sensors is relatively mature. In the artificial intelligence system of automatic/intelligent driving vehicles, the applicability of FPGA will be the most suitable for processing sophisticated ADAS and autonomous driving. Figure 7. FPGA for Auto In the field of automotive electronic system interface and control, FPGA chips are used to control and drive electric vehicle motor control systems, connect various in-vehicle equipment such as driving systems, instrument panels, radar, ultrasonic sensors, etc. control. In the field of video bridging and fusion, FPGA chips can be used to realize functions such as signal bridging of multiple image sensors, 3D surround view video fusion, reversing auxiliary video, and assisted driving video.In the field of communication, the number of 5G base stations has increased, and the FPGA usage of a single base station has increased, driving the increase in FPGA demand. According to estimates, the FPGA consumption of a 5G single base station is expected to increase from 1-3 blocks in the 4G period to 4-5 blocks in the 5G period. Figure 8. RFSoC FPGA Board Target 5G eFPGA technology is superior to traditional FPGA solutions in terms of performance, cost, power consumption, profitability, etc., and can provide flexible solutions for different application scenarios and different market segments. The economic trend of increasing design complexity and falling equipment costs has stimulated the market demand for eFPGA technology.   Ⅳ Development Trend of FPGA First of all, with the commercialization of the new generation of communication technology, the demand for products such as communication base stations, servers, and intelligent terminals will further expand, thereby driving the increase in the market demand for FPGA chips. At the same time, smart cities, smart factories, and consumer electronics pay more attention to the functionality of various smart IoT devices, which will drive the wide application of FPGA chips in smart IoT devices. With the development of the Internet of Vehicles technology, the scale of the use of FPGA chips in the automotive industry will increase day by day to build a more complete Internet of Vehicles and realize smarter autonomous driving functions. Therefore, with the rapid penetration of 5G, the vigorous development of AI and the increasing trend of automotive intelligence, it is expected that the demand for FPGAs in the three fields of communication, AI and automotive electronics will continue to increase in the future, which will also promote The FPGA industry continues to grow.   Ⅴ FAQ 1. What is FPGA and why it is used?The acronym FPGA stands for Field Programmable Gate Array. It is an integrated circuit that can be programmed by a user for a specific use after it has been manufactured. ... These blocks create a physical array of logic gates that can be customized to perform specific computing tasks. 2. Is FPGA faster than GPU?The difference between GPU and FPGA performance is not a static factor, but it does depend on the size of the data set. A study by Sanaullah and Herbordt [7] revealed that FPGA can compute small samples of 3D FFT tens of times faster than GPU. The difference is less clear when the data set gets bigger. 3. Is FPGA faster than CPU?A FPGA can hit the data cell faster and more often than a CPU can do it meaning the FPGA causes more results to occur during an attack. It all goes faster when an FPGA is used. And as a side benefit, no trace of all this is left on the CPU because it's never touched when an FPGA is used. 4. Are FPGAs efficient?Efficiency and Power: FPGAs are well-known for their power efficiency. A research project done by Microsoft on an image classification project showed that Arria 10 FPGA performs almost 10 times better in power consumption. 5. Is FPGA programming hard?FPGA vendors have touted their wares as ideal replacements for DSPs, CPUs, and GPUs – even for all of them in a single device – but they are notoriously difficult for software engineers to program as they are not anything like a conventional processor. 6. What can you do with FPGAs?Uses for FPGAs cover a wide range of areas—from equipment for video and imaging, to circuitry for computer, auto, aerospace, and military applications, in addition to electronics for specialized processing and more. 7. What is the difference between processor and FPGA?Microprocessor vs FPGA: A microprocessor is a simplified CPU or Central Processing Unit. ... An FPGA doesn't have any hardwired logic blocks because that would defeat the field programmable aspect of it. An FPGA is laid out like a net with each junction containing a switch that the user can make or break. 8. What language is used to program FPGA?VerilogTraditionally, FPGAs are programmed using pro-level hardware-description languages such as Verilog or VHDL. 9. How many times can you program an FPGA?There is effectively no limit to the number of times a device can be reconfigured; the configuration is stored in SRAM, which has no write limit. most Fpgas can be passively loaded from a processor, one word at a time. That processor can get the FPGA image from anywhere. 10. What are the advantages of FPGA?FPGA advantagesLong-term availabilityUpdating and adaptation at the customerVery short time-to-marketFast and efficient systemsAcceleration of softwareReal-time applicationsMassively parallel data processing 11. How do you make an FPGA?FPGA design checklistMake sure you have plenty of time to spare.Find a decent computer.If you can afford it, add a big display.Decide which operating system to use.Consider using a virtual machine (VM).Select an FPGA vendor.Pick out a suitable development board.Select an embedded processor to use. 12. What is FPGA for beginners?FPGA stands for Field Programmable Gate Array. As you may already know, FPGA essentially is a huge array of gates that can be programmed and reconfigured any time anywhere. Huge array of gates is an oversimplified description of FPGA. FPGA is indeed much more complex than a simple array of gates. 13. What is FPGA in Verilog?FPGAs are nothing, but reconfigurable logic blocks and interconnects can be programmed by Hardware Description Language like Verilog/ VHDL to perform a specific functionality. 14. Do we need to program the FPGA once powered off?If you have a SRAM-based FPGA, like the Spartan 3, then you have to program it each time it is powered up. The reason for this is that the SRAM which stores the configuration is volatile and loses the programmed configuration after power is switched off. 15. How is FPGA different from microcontroller?One of the main differences between a microcontroller and an FPGA is that an FPGA doesn't have a fixed hardware structure, while a microcontroller does. While FPGAs include fixed logic cells, these, along with the interconnects, can be programmed in parallel by using HDL coding language.

Introduction There are many kinds of LCD interfaces, with wide range of applications. The classification criteria mainly depends on the driving mode and control mode of the LCD. At present, there are generally several connection modes for color LCDs on mobile phones: MCU mode, RGB mode, SPI mode, VSYNC mode, MDDI mode, DSI mode, etc. and only the TFT module has RGB interface. Basics of LCD Interfacing Catalog Introduction Ⅰ LCD Interface Modes 1.1 MCU Mode 1.2 VSYNC Mode 1.3 M6800 Mode 1.4 Intel 8080 Mode 1.5 RGB Mode 1.6 SPI (Serial Peripheral Interface) Mode 1.7 MDDI (Mobile Display Digital Interface) Mode 1.8 DSI (Display Serial Interface) Mode Ⅱ MCU Mode vs RGB Mode Ⅲ TFT-LCD Interface Explained 3.1 TTL Interface 3.2 LVDS 3.3 EDP (Embedded Display Port) 3.4 MIPI Interface Ⅳ FAQ Ⅰ LCD Interface Modes The following is a detailed explanation of the different interface modes: 1.1 MCU Mode It is mainly used in the field of single-chip microcomputers. Later, it is widely used in low-end mobile phones, and its main feature is that it is cheap. The standard term for the MCU-LCD interface is the 8080 bus standard proposed by Intel. Figure 1. Intel 8080 Therefore, 8080 is used to refer to the MCU-LCD screen in many documents. It can be mainly divided into 8080 mode and 6800 mode, and the difference between the two is mainly the timing. There are 8 bits, 9 bits, 16 bits, 18 bits, and 24 bits for data bit transfer. Connections are divided into: CS/, RS (register selection), RD/, WR/, and data lines. The advantages are: the control is simple and convenient, no clock and synchronization signals are required. The disadvantage is: it consumes GRAM, so it is difficult to achieve a large screen (above 3.8). For LCM with MCU interface, the internal chip is called LCD driver. The main function is to transform the data/command sent by the host into the RGB data of each pixel, so that it can be displayed on the screen. This process does not require point, line, frame clocks.The LCD Driver IC of the MCU interface is equipped with GRAM. As a co-processor of the MCU, it accepts the Command/Data sent by the MCU and can work relatively independently. Pay attention to, the internal chip of LCD Module (LCM) is called the LCD driver. The main function is to transform the data/commands sent by the host computer into the RGB data of each pixel, so that it can be displayed on the screen. This process also does not require point, line, frame clocks. 1.2 VSYNC Mode In fact, this mode is to add a VSYNC signal to the MCU mode and applied to the update of the moving picture, which is very different from the above interface. This mode supports the function of direct animation display. It provides a solution for animation display with minimal changes to the MCU interface. In this mode, the internal display operation is synchronized with the external VSYNC signal. Animation display at a higher rate than internal operations can be achieved. However, due to the difference in its operation mode, this mode has a limit on the speed, that is, the write speed to the internal SRAM must be greater than the speed of the display read internal SRAM. 1.3 M6800 Mode The M6800 mode supports selectable bus widths of 8/9/16/18-bit (the default is 8 bits). The actual design idea is the same as that of Intel 8080. The main difference is the bus control read and write signals in this mode. Combined on one pin (with a latch signal (E) data bit transmission has 8, 9, 16 and 18 bits). Figure 2. M6800 Mode 1.4 Intel 8080 Mode Intel 8080 LCD interface is divided into: CS/, RS (register selection), RD/, WR/, and the data line. Advantage: Simple and convenient control, no clock and synchronization signals are required. Disadvantage: It consumes GRAM, so it is difficult to achieve a large screen (above QVGA). Figure 3. Intel 8080 Mode 1.5 RGB Mode The large screen adopts more modes, and the data bit transmission also has the 6-, 16- and 18-, 24-bit. The connections are generally: VSYNC, HSYNC, DOTCLK, CS, RESET, some also need RS, and the rest is the data line. Its advantages and disadvantages are just the opposite of MCU mode. The main difference between the MCU-LCD screen and the RGB-LCD screen is the location of the video memory. The video memory of RGB-LCD is acted by system memory, so its size is only limited by the size of system memory. Where RGB-LCD can be made larger, such as 4.3" can only be regarded as entry-level, and 7" in MID, 10" screens have begun to be widely used. At the beginning of the design of MCU-LCD, it was only necessary to consider that the memory of the single-chip microcomputer was small, so the video memory was built into the LCD module, and then the software updated the video memory through special display commands with small MCU screen. At the same time, the display update speed is slower than RGB-LCD. The display data transmission mode is also different. RGB screen only needs to organize the data in the video memory. After starting the display, the LCD-DMA will automatically transfer the data in the video memory through the RGB interface to the LCM, while the MCU screen needs to send a drawing command to modify the internal RAM of the MCU (that is, the RAM of the MCU screen cannot be directly written).Therefore, the RGB display speed is significantly faster than that of the MCU, and the MCU-LCD is also slower in terms of video playback. For the LCM of the RGB interface, the host directly outputs the RGB data of each pixel without conversion (except for GAMMA correction, etc.). For this interface, an LCD controller is required in the host part to generate RGB data and sync signals. Figure 4. RGB Mode Here gives a note. The color TFT LCD screen mainly has 2 kinds of interfaces: TTL interface (RGB color interface), and LVDS interface (differential signal transmission). The TTL interface is mainly used for small-sized TFT screens below 12.1 inches, and the LVDS interface is mainly used for large-sized TFT screens above 8 inches. The TTL interface has many lines and the transmission distance is short, while the LVDS interface has a long transmission distance and a small number of lines. The large screen adopts more modes, the control pins are VSYNC, HSYNC, VDEN, VCLK, S3C2440 supports up to 24 data pins, and the data pin is VD[23-0].The image data sent by the CPU or graphics card is a TTL signal (0-5V, 0-3.3V, 0-2.5V, or 0-1.8V), and the LCD itself also receives a TTL signal, which is transmitted at a high rate over long distances. However, its performance is poor, and the anti-interference ability is relatively poor. With the time goes by, a variety of transmission modes were proposed, such as LVDS, TDMS, GVIF, P&D, DVI and DFP. They actually just encode the TTL signal sent by the CPU or graphics card into various signals for transmission, and decode the received signal on the LCD side to obtain the TTL signal. No matter what transmission mode is used, the essential TTL signal is the same. Note: TTL/LVDS are two signal transmission modes: TTL is a mode in which high level means 1, and low level means 0; LVDS is the difference of a positive and negative corresponding waveform used to indicate the 1 or 0. 1.6 SPI (Serial Peripheral Interface) Mode It is less used. There are 3-wire and 4-wire, the connection is CS/, SLK, SDI, and SDO, and the software control is more complicated. 1.7 MDDI (Mobile Display Digital Interface) Mode  Qualcomm's MDDI, which can improve the reliability of mobile phones and reduce power consumption by reducing wiring. It will replace SPI mode as a high-speed serial interface in the mobile field. The main connection is host_data, host_strobe, client_data, client_strobe, power, and GND. 1.8 DSI (Display Serial Interface) Mode This mode is a serial bidirectional high-speed command transmission mode, with D0P, D0N, D1P, D1N, CLKP, CLKN connected.   Ⅱ MCU Mode vs RGB Mode Among them, there are more applications in MCU mode and RGB mode. The differences are as follows:1) MCU interface: it will decode commands, generate timing signals by timing generator, and drive COM and SEG.RGB interface: When writing LCD register setting, it is no different from MCU interface. The difference is only in how the image is written.2) When using the MCU mode, since the data can be stored in the IC's internal GRAM first and then written to the screen, the LCD in this mode can be directly connected to the memory bus. It is different when using RGB mode, and has no internal RAM, HSYNC, VSYNC, ENABLE, CS, RESET, RS can be directly connected to the GPIO port of memory, and use the GPIO port to simulate waveforms.3) MCU Interface vs RGB InterfaceThe main differences between the MCU interface and the RGB interface are:MCU interface mode: display data is written into DDRAM, often used for still picture display.RGB interface mode: The display data is not written into DDRAM, but directly written to the screen, which is fast and often used to display video or animation.   Ⅲ TFT-LCD Interface Explained The commonly used interfaces of TFT-LCD, including TTL (RGB), LVDS, EDP, and MIPI. Here roughly talk about the basic principles of the signal composition of these interfaces. Figure 5. TTL (Transistor-Transistor Logic) Schematic 3.1 TTL Interface 🔺Interface OverviewTTL is transistor-transistor logic, and TTL level signals are generated by TTL devices. TTL devices are a large category of digital integrated circuits. They are manufactured by bipolar technology and have the characteristics of high speed, low power consumption and many varieties.The TTL interface is an interface for transmitting data in parallel. When using it, it is not necessary to use a dedicated interface circuit at the driver board end and the LCD panel end of the liquid crystal display, but the TTL data signal output by the main control chip of the driver board is transmitted through the cable. It is directly transmitted to the input interface of the LCD panel. Due to the high signal voltage, many connections and long transmission cables of the TTL interface, the anti-interference ability of the circuit is relatively poor, and it is easy to generate electromagnetic interference (EMI). In practical applications, TTL interface circuits are mostly used to drive small-size (below 15in) or low-resolution LCD panels. The highest pixel clock of TTL is only 28MHz.TTL is the only signal that TFT-LCD can recognize. Early digital processing chips are all TTL, that is, RGB is directly output to TFT-LCD.🔺Signal TypesThe TTL output interface of the driver board generally includes three types of signals: RGB data signal, clock signal and control signal. As shown below:(1) RGB Data-Signala. Single Channel6-BitAs for it, there are 18 RGB data lines in total, including 6 R0~R5 red primary color data lines, 6 G0~G5 green primary color data lines, 6 B0~B5 blue primary color data lines, a total of 18 strips. Since the primary color RGB data is 18bit, it is also called 18-bitTTL interface.8-BitFor it, there are a total of 24 RGB data lines, including 8 R0~R7 red primary color data lines, 8 B0~B7 green primary color data lines, 8 BO~B7 blue primary color data lines, a total of 24 strips. Since the primary color RGB data is 24-bit, it is also called 24-bit TTL interface.b. Dual ChannelDual channels, that is, two sets of RGB data, which are divided into odd channels and even channels. Some clocks are also divided into OCLK/ECLK, and some share one. The following figure has two, as shown below:6-BitIt has 36 RGB data lines in total, including 18 odd RGB data lines, 18 even RGB data lines. Since the primary color ROB data is 36-bit, it is also called 36-bitTTL interface.8-BitIt has 48 RGB data lines, including 24 odd RGB data lines and 24 even RGB data lines. Since the primary color RGB data is 48bit, it is also called 48-bit TTL interface.(2) Clock SignalIt refers to the pixel clock signal, which is the benchmark for transmitting data and reading the data signal. When using odd/even pixel dual way to transmit RGB data, different output interfaces use different methods of pixel clock. Some output interface odd/even pixel dual data share a pixel clock signal, and the others set odd pixel data clock and even pixel two clock signals to meet the needs of different LCD panels.(3) Control SignalThe control signals include a data enable signal (or an effective display data strobe signal) DE, a horizontal sync signal HS, and a vertical sync signal VS. 3.2 LVDS 🔺Overview of LVDS InterfaceLVDS is a low-voltage differential signaling technology interface. A digital video signal transmission method developed to overcome the shortcomings of large power consumption and large EMI electromagnetic interference when transmitting broadband high bit rate data in TTL level mode. The LVDS output interface uses a very low voltage swing (about 350mV) to transmit data differentially on two PCB traces or a pair of balanced cables, that is, low-voltage differential signaling. Using the LVDS output interface, the signal can be transmitted at a rate of several hundred Mbit/s on the differential PCB line or balanced cable. Due to the low-voltage and low-current driving method, low noise and low power consumption are achieved.🔺Composition of LVDS Interface CircuitIn a liquid crystal display, the LVDS interface circuit includes two parts, the LVDS output interface circuit (LVDS transmitter) on the motherboard side and the LVDS input interface circuit (LVDS receiver) on the LCD panel side. The LVDS emitter converts the TTL signal into an LVDS signal, and then transmits the signal to the LVDS decoding IC on the receiving end through the flexible cable (line) between the driver board and the LCD panel, and the LVDS receiver then serializes the serial signal which is converted into a parallel signal of TTL level, and sent to the LCD screen timing control and row and column drive circuit. In other words, TFT only recognizes TTL (RGB) signals.🔺Signal type of LVDS interfaceLVDS signals are composed of data differential and clock differential signals. As shown below:(1) Single Channel6-Bit DataThere are 4 sets of differential lines, 3 sets of signal lines, and one set of clock lines, including Y0M, Y0P, Y1M, Y1P, Y2M, Y2P, CLKOUT_M, CLKOUT_P.8-Bit DataThere are 5 groups of differential lines, 4 groups of signal lines, and a group of clock lines. They are Y0M, Y0P, Y1M, Y1P, Y2M, Y2P, CLKOUT_M, CLKOUT_P.(2) Dual ChannelWhen LVDS transmits data with higher resolution, the anti-interference ability is relatively strong. But when the resolution is higher than 1920×1080, the single channel is overwhelmed, so there is a dual interface. Its purpose is very simple, speed up and enhance anti-interference ability.6-Bit DataIt is exactly twice as long as the single channel, and the clock is also two channels. The red part: the two sets of signals: Y3M, Y3P, Y3M1, and Y3M1 are not connected.8-Bit DataSimilar to the previous comparison. 3.3 EDP (Embedded Display Port) EDP is a communication interface of the computer display screen. The resolution of the computer using the EDP display interface will be higher than that of the LVDS interface. Generally, high-definition screens use this communication interface. It is a fully digital interface based on the DisplayPort architecture and protocol. It can transmit high-resolution signals with simpler connectors and fewer pins, and can achieve simultaneous transmission of multiple data, so the transmission rate is much higher than LVDS. 3.4 MIPI Interface Compared with the LVDS interface, the MIPI interface is rare, but in fact, it has many advantages. The MIPI interface module has the advantages of high speed, large amount of data transmission, low power consumption, and good anti-interference when compared with the parallel port. It is more and more favored by customers and is growing rapidly. For example, an 8M module with both MIPI and parallel port transmission requires at least 11 transmission lines and an output clock of up to 96M to achieve a full pixel output of 12FPS when using an 8-bit parallel port. Channel 6 transmission lines can achieve a frame rate of 12FPS at full pixels, and the current consumption will be about 20MA lower than that of parallel port transmission. Since MIPI uses differential signal transmission, the design needs to be strictly designed according to the general rules of differential design. The key is to achieve differential impedance matching. The MIPI protocol stipulates that the differential impedance of the transmission line is 80-125 ohms.   Ⅳ FAQ 1. What is LCD interface?16x2 LCD means that there are two rows in which 16 characters can be displayed per line, and each character takes 5X7 matrix space on LCD. ... In this tutorial we are going to connect 16X2 LCD module to the 8051 microcontroller (AT89S52). 2. What is LCD parallel interface?LCD Displays that use a parallel interface include Character, Graphic and TFT. ... The initial step is to energize the LCD. Reads and Writes are sent via 8 data lines and 3 control lines. These control lines are Read/Write (R/W), Enable (E) and Register Select (RS). 3. What is TFT interface?A TFT LCD display module consists of a TFT LCD panel, one or more COG (chip-on-glass) or COB (chip-on-board) driver ICs, a backlight, and an interface. Several TFT display interface technologies exist today. Picking the right interface depends on specific end-product concerns. 4. What are the different types of LCDs?Different Types of LCD PanelsTwisted Nematic (TN) Twisted Nematic LCDs are the most commonly manufactured and used types of monitors across a wide range of industries. ...IPS Panel TechnologyVA PanelAdvanced Fringe Field Switching 5. What is MCU interface?The MCU interface has two standard types, the Intel-8080 and Motorolla-6800 series. These interfaces communicate through read, write and chip-select signals to address registers or display RAM. The slight difference between the two pertains to the direction and separation of the write and read signals. 6. What is MCU interface LCD?These interfaces communicate through read, write and chip-select signals to address registers or display RAM. Depending on color depth (8, 9, 16 or 18-bit), MCU sends RGB signals directly to LCM's display memory. 7. Is TFT an LCD?TFT is a kind of LCD. The TFT(Thin Film Field-effect Transistor) is a video in which every single pixel in the liquid crystal display is actuated by a Thin Film Transistor embedded in the rear. Thus can achieve high speed, high brightness, high contrast display screen information.

Introduction Latching relay is a new type of relay and also an automatic switch. Like other electromagnetic relays, it turns on and off the circuit automatically. The difference is that the normally closed or normally open state of it is completely dependent on the action of permanent magnets, and the switching state of it is triggered by a pulse electric signal of a certain width. It has the characteristics of power saving, stable performance, small size, large carrying capacity, and superior performance than general relays. Latching Relay Basics in 2 Minutes Catalog Introduction Ⅰ Working Principle 1.1 Action Principle 1.2 Action Process Ⅱ Main Functions and Advantages 2.1 Average View 2.2 Function Lists 2.3 Application Area Lists 2.4 Latching Relay Advantages Ⅲ Tech Parameters Ⅳ Latching Relay Test 4.1 Measuring Contact Resistance 4.2 Measuring Coil Resistance 4.3 Set Voltage and Current 4.4 Reset Voltage and Current Ⅴ Relay Selection 5.1 The Necessary Conditions 5.2 Relevant Information Search 5.3 Installation Layout Consideration Ⅵ FAQ Ⅰ Working Principle 1.1 Action Principle The on and off state of the latching relay is usually held by the magnetic force generated by the permanent magnet. When the contacts of the relay need to be opened or closed, only the positive (reverse) DC pulse voltage is needed to excite the coil, and the relay completes the state transition between opening and closing in an instant. Usually when the contact is in the holding state, the coil does not need to continue to be energized, and the state of the relay can be maintained unchanged only by the permanent magnet force.   1.2 Action Process When the contacts of the relay need to be set, it is only necessary to excite the coil J2 with a positive DC pulse voltage. The magnetic poles generated by the coil J2 after excitation interact with the magnetic poles of the permanent magnet. As we all known, the same polarities repel each other, but the opposite polarities attract each other. The state transition from reset to set is completed in an instant. The following schematic diagrams demonstrates the specific state transition process. The process of the latching relay changing from the set state to the reset state, which are the same. Figure 1. Reset Latching Relay Figure 2. Constant-Current Pulse Monment Figure 3. Constant-Current Pulse Monment Figure 4. Latching Relay Reset   Ⅱ Main Functions and Advantages 2.1 Average View Latching relay is an automatic switching element with isolation function. It is widely used in remote control, telemetry, communication, automatic control, mechatronics and power electronic equipment. It is one of the most important control elements in electricity.Magnetic latching relays generally have an induction mechanism (input part) that can reflect certain input variables (such as current, voltage, power, impedance, frequency, temperature, pressure, speed, light, etc.). It has the ability to turn on/off the controlled circuit. In addition, between the input part and output part of the relay, there is an intermediate mechanism (drive part) for coupling and isolating the input, functional processing and driving the output part. 2.2 Function Lists The latching relay has the following functions:1) ExpansionFor example, when the control signal of a multi-contact relay reaches a certain value, multiple circuits can be switched, disconnected, and connected at the same time according to different forms of contact groups.2) AmplificationFor example, magnetic latching relays can control a large-power circuit with a very small control quantity.3) IntegrationFor example, when a plurality of control signals are input to a multi-winding relay in a prescribed form, they will be compared and integrated to achieve a predetermined control effect.4) Automation, remote control and monitoringFor example, on the automatic device and other electrical appliances, magnetic latching relays can form a program control circuit to realize automatic operation. 2.3 Application Area Lists 1) Smart meters: IC card meters, prepaid meters, single-phase meters, three-phase meters.2) Reactive power compensation: synchronous switch, composite switch, smart capacitor.3) Intelligent control: smart home, solar street light control, automation equipment, etc. 2.4 Latching Relay Advantages 1) They only need pulse excitation, and can work with single and double coils.2) Small size, easy installation.3) Low power consumption and strong load capacity.4) Safe and reliable, long service life. Figure 5. General Relay Structure Ⅲ Tech Parameters 1) Rated VoltageIt refers to the voltage required by the coil when the relay is working normally. Depending on the model of the relay, it can be AC voltage or DC voltage.2) DC ResistanceIt refers to the DC resistance of the relay coil, which can be measured by a multimeter.3) Pull-in CurrentIt refers to the minimum current that the relay can produce the pull-in action. In normal use, the given current must be slightly larger than the pull-in current, so that the relay can work stably. As for the working voltage applied to the coil, generally do not exceed 1.5 times the rated working voltage, otherwise it will generate a larger current and burn the coil.4) Release CurrentIt refers to the maximum current that the relay generates to release the action. When the current in the pull-in state of the relay is reduced to a certain level, it will return to the unpowered release state. The current at this time is much smaller than the pull-in current.5) Switch Voltage and CurrentThis refers to the voltage and current that the relay allows to load. It determines the magnitude of the voltage and current that the relay can control, and you cannot be exceeded this value during use, otherwise it is easy to damage the contacts of the relay.6) Coil Resistance RThe resistance produced by winding a T circle with an enameled wire with a diameter of Φ: R=￡*(T/Φ).7) TemperatureThe higher the temperature, the greater the resistance, and the lower the resistance, the smaller the resistance. Generally speaking, the coil resistance refers to the coil resistance at 20°C. When the temperature is higher or lower than 20℃, there is a calculation formula: Rt=R20[1+(T℃-20℃)×0.004].8) Contact Resistance CRIt is the resistance between the contacts of the relay. And it is the sum of the shrinkage resistance Re and the surface film resistance Rf: Rk=Re+Rf.Note:🔺The factors that form shrinkage resistance Re:♦️The size of the contact pressure determines the size of the shrink resistance. The relationship between the two is inversely proportional, the greater the contact pressure, the smaller the shrinkage resistance.🔺The factors that form the surface film resistance Rf:♦️Dust in the air.♦️Harmful gases in the air: H2S, SO2, etc.♦️Organic vapor in the air: plastic, glue and rosin.♦️Oil stains on the contact surface during the production process.9) Pull-in VoltageThe minimum voltage required to close the relay contacts.10) Release voltageThe minimum voltage required to open the relay contacts.11) Insulation ResistanceThe resistance value that appears when measured with a specified DC voltage between conductive parts that are insulated from each other.12) Medium Withstand VoltageAlso known as dielectric degree, it refers to the maximum voltage that can withstand between two conductive parts without breakdown.13) Reversing RetentionThe minimum force applied on the armature assembly handle to open or close the contacts.14) Contact PressureThe interaction force generated between the moving and static contacts is equal to the contact pressure equal to the reaction force generated by the over-travel of the reed head. Figure 6. Latching Relay Product Ⅳ Latching Relay Test 4.1 Measuring Contact Resistance Use the resistance profile of the universal meter to measure the resistance of the normally closed contact and the moving point, which should be 0. The contact resistance can be measured in a more accurate way within 100 milliohms, while the resistances of the normally-open contact and the moving point should infinite. From this, it can be distinguished which is a normally-closed contact or a normally-open contact.   4.2 Measuring Coil Resistance The resistance value of the relay coil can be measured with the universal meter R×10Ω, so as to judge whether there is an open circuit phenomenon in the coil.   4.3 Set Voltage and Current Get an adjustable regulated power supply and an ammeter, input the set voltage to the relay, and insert an ammeter in the power supply loop for monitoring. Slowly increase the power supply voltage, and when you hear the sound of the relay picking up, write down the set voltage and set current. In order to be accurate, you can try several times. Pay attention to, the setting current should be the average value, and the setting voltage should be the maximum value.   4.4 Reset Voltage and Current Repeat the above operation. But there is a little difference that the reset current is the average value, and the reset voltage is the maximum value.   Ⅴ Relay Selection 5.1 The Necessary Conditions ① The power supply voltage of the control circuit, the maximum current that can be provided.② The voltage and current in the controlled circuit.③ How many sets and types of contacts are needed for the controlled circuit. When selecting a relay, the power supply voltage of the general control circuit can be used as the basis for selection. The control circuit should be able to provide enough working current to the relay, otherwise the relay will be unstable when it is closed.   5.2 Relevant Information Search After consulting the relevant information to determine the conditions of use, you can search for the relevant information to find out the model and specification number of the required relay. If you already have a relay on hand, you can check whether it can be used based on the data. Finally, consider whether the size is appropriate.   5.3 Installation Layout Consideration If it is used for general electrical appliances, in addition to considering the volume of the case, it is necessary to consider the installation layout of the circuit board. For small electrical appliances, such as toys and remote control devices, ultra-small relay products should be used.   Ⅵ FAQ 1. What is magnetic latching?The design of a Magnetic Latching Relay is such that when a short pulse of electrical energy is applied to the solenoid coil, sufficient magnetic force is generated to over-come the force of the relay' return mechanism. 2. How does a latching relay work?One latching type has two opposing coils with an over-center spring or permanent magnet hold the contacts in position after the coil is de-energized. A pulse to one coil turns the relay on and a pulse to the opposite coil turns the relay off. 3. Where is latching relay used?This type of relay is most suitable in applications like ON/OFF devices from multiple places with push-button or momentary switch. For example, it is used in a lighting circuit or conveyer to control from different locations. 4. What is a magnetic latching relay used for?A magnetic latching relay is a device in which the solenoid principle is applied to open and close light-current electrical circuits. The same device applied in heavy-current circuits is called a contactor, or circuit breaker. 5. How does a latching relay reset?Resetting is very simple. The coil circuit needs to be opened and shortened to the coils ground potential. The capacitor will be discharged through the coil and drives a current pulse with opposite polarity through the coil.

Ⅰ Introduction RFID is a technology that uses electromagnetic fields to automatically recognize and track tags attached to objects. An RFID system is composed of a small radio transponder, a radio receiver, and a radio transmitter. Catalog Ⅰ Introduction Ⅱ RFID Related Video: Ⅲ RFID Chip 3.1 WHAT IS RFID? 3.2 HOW DOES RFID WORK? 3.3 What Are the Types of RFID Systems  ? Ⅳ RFID Tags 4.1 Definition of RFID Tags 4.2 How RFID Tags Work？ 4.3 Examples of RFID Tags Ⅴ What Does (RFID Reader) Mean? 5.1 What exactly is an RFID Reader  ? 5.2 Readers Types Ⅵ Blocking Wallet 6.1 What Is an RFID-Blocking Wallet? 6.2 How Do RFID-Blocking Wallets Work? 6.3 The 5 Best RFID-Blocking Wallets Ⅶ RFID Asset Tracking  7.1 What Is RFID Asset Tracking  ? 7.2 How Does RFID Asset Tracking  Work? Ⅷ RFID Vs. NFC: The 5 Key Differences Ⅸ FAQ   Ⅱ RFID Related Video:   How RFID Works? and How to Design RFID Chips?     RFID Related Video Description: In this video, we learn about how RFID works and we see how RFID chips are designed. The main concepts such as backscatter modulation and energy harvesting is explained in detail. We start by explaining the RFID technology, in particular passive RFIDs.We discuss the operation of RFID and the magnetic field coupling.Then we look inside the RFID tags and locate the RFID chip and antenna inside the tags.Then we see how RFID chips are designed and explain all different parts of the chip in detail.We discuss the backscatter modulation as well as RF frequencies used in RFID communication.At the end we also provide some information about RFID readers.     Ⅲ RFID Chip 3.1 WHAT IS RFID? RFID is an abbreviation for "radio-frequency identification," and it refers to a technology that uses radio waves to capture digital data encoded in RFID tags  or smart labels (defined below). RFID is similar to barcoding in the sense that data from a tag or label is captured by a device and stored in a database. RFID, on the other hand, has several advantages over systems that use barcode asset tracking software. The most notable difference is that RFID tag data can be read even when the tag is not in direct view, whereas barcodes must be aligned with an optical scanner. If you are thinking about implementing an RFID solution, contact the RFID experts at AB&R® (American Barcode and RFID).   3.2 HOW DOES RFID WORK? RFID systems are made up of three parts: a scanning antenna  , a transceiver, and a transponder. An RFID reader  or interrogator is a device that combines the scanning antenna  and the transceiver. RFID reader  s are classified into two types: fixed readers  and mobile readers  . RFID reader  s are network-connected devices that can be portable or fixed. It transmits signals that activate the tag via radio waves. When activated, the tag sends a wave back to the antenna.  which converts it into data. The RFID tag contains the transponder. RFID tag read range varies depending on factors such as tag type, reader type, RFID frequency, and interference in the surrounding environment or from other RFID tags  and readers,  Tags with a more powerful power source have a greater read range.   3.3 What Are the Types of RFID Systems  ? RFID systems are classified into three types: low frequency (LF), high frequency  (HF), and ultra-high frequency (UHF) (UHF). Microwave RFID technology is also available. Frequencies differ greatly depending on country and region. RFID systems with low frequency. These frequencies range from 30 kHz to 500 KHz, with 125 KHz being the most common.  LF RFID  has relatively short transmission ranges, ranging from a few inches to less than six feet. RFID system with high frequency  These range from 3 MHz to 30 MHz, with 13.56 MHz being the most common HF frequency. The typical range is from a few inches to several feet. RFID  UHF  systems These have a frequency range of 300 MHz to 960 MHz, with a typical frequency of 433 MHz, and can be read from a distance of 25 feet or more. RFID systems that use microwaves These operate at 2.45 Ghz and can be read from a distance of more than 30 feet.   Ⅳ RFID Tags 4.1 Definition of RFID Tags RFID tags are a type of tracking system that uses intelligent barcodes to identify items. RFID stands for "radio frequency identification," and RFID tags  make use of radiofrequency technology. These radio waves send data from the tag to a reader, which then sends the data to an RFID computer program. RFID tags  are commonly used to track merchandise, but they can also be used to track vehicles, pets, and even Alzheimer's patients. An RFID tag is also known as an RFID chip. 4.2 How RFID Tags Work？ An RFID tag transmits and receives data via an antenna  and a microchip, which is also known as an integrated circuit or IC. The RFID reader  's microchip is programmed with whatever information the user desires. What exactly is an RFID tag? RFID tags are classified into two types: battery-powered and passive. Battery-operated RFID tags.  as the name implies, use an onboard battery as a power source, whereas passive RFID tags  do not, instead of relying on electromagnetic energy transmitted from an RFID reader,  RFID tags  powered by batteries are also known as active RFID tags,  Passive RFID tags  transmit data at three different frequencies: 125–134 KHz, also known as Low Frequency (LF), 13.56 MHz, also known as High Frequency (HF) and  Near-Field Communication  (NFC), and 865–960 MHz, also known as Ultra High Frequency (UHF) (UHF). The range of the tag is affected by the frequency used. When a reader scans a passive RFID tag, it sends energy to the tag, which powers it up enough for the chip and antenna  to relay information back to the reader. The reader then sends this data to an RFID computer program for interpretation. Passive RFID tags  are classified into two types: inlays and hard tags. Inlays are typically thin and can be adhered to a variety of surfaces, whereas hard tags are, as the name implies, made of a hard, durable material such as plastic or metal.Transponders are much more battery-efficient than beacons because they only activate when they are close to a reader. Figure1:antenna 4.3 Examples of RFID Tags Because an active RFID is constantly transmitting a signal, it is an excellent choice for those seeking real-time trackings, such as in tolling and real-time vehicle tracking applications. They are a costly product, but they have a long read range, which may be preferred depending on the application. Passive RFID tags.  which cost around 20 cents each, are a much more cost-effective option than active  RFID tags ,  As a result, they are a popular choice for applications such as supply chain management, race tracking, file management, and access control. While a passive RFID tag does not require a direct line of sight to the RFID reader.  its read range is much shorter than that of an active RFID tag. They are small, lightweight, and have the potential to last a lifetime. Active RFID tags are better suited for applications requiring durability because they have a larger, more rugged design than passive RFID tags,  They are commonly used in toll payment transponder systems, cargo tracking applications, and even personal tracking devices. Figure2:Examples of RFID Tags Ⅴ What Does (RFID Reader) Mean? 5.1 What exactly is an RFID Reader  ? A radio frequency identification reader (RFID reader) is a device that collects data from RFID tags that are used to track individual objects. Data is transferred from the tag to a reader using radio waves. RFID is a technology that, in theory, is similar to bar codes. The RFID tag, on the other hand, does not have to be scanned directly, nor does it need to be in direct line of sight of a reader. To be read, the RFID tag must be within the range of an RFID reader.  which can range from 3 to 300 feet. RFID technology allows several items to be scanned quickly and allows for quick identification of a specific product, even when it is surrounded by several other items. RFID tags have not replaced bar codes due to their high cost and the requirement to individually identify each item.   5.2 Readers Types A passive reader in a Passive Reader Active Tag (PRAT) system only receives radio signals from active tags (battery operated, transmit only). A PRAT system reader's reception range can be adjusted from 1–2,000 feet (0–600 m), providing flexibility in applications such as asset protection and supervision.   An active reader in an Active Reader Passive Tag (ARPT) system transmits interrogator signals and receives authentication responses from passive tags. Active tags activated by an interrogator signal from the active reader are used in an Active Reader Active Tag (ARAT) system. A Battery-Assisted Passive (BAP) tag, which acts like a passive tag but has a small battery to power the tag's return reporting signal, could also be used in this system.Fixed readers  are configured to create a specific interrogation zone that is tightly controlled. This allows for a well-defined reading area when tags enter and exit the interrogation zone. Handheld mobile readers  are available, as well as those mounted on carts or vehicles.   Ⅵ Blocking Wallet If you have RFID-enabled cards, passports, or devices, an RFID-blocking wallet may be necessary to protect your data.   6.1 What Is an RFID-Blocking Wallet? Thieves can steal your credit card information just by standing next to you if you don't have an RFID-blocking wallet. It is possible if you carry a credit card with an RFID chip embedded in it. RFID credit cards allow you to make payments by simply touching the card to a scanner rather than swiping it across or inserting it into a terminal. They're made for ease of use. Imagine someone approaching you and "scanning" the wallet in your back pocket without your knowledge. They could theoretically copy the RFID data and create a clone of your credit card unless it is protected by an RFID-blocking wallet.   6.2 How Do RFID-Blocking Wallets Work? RFID chips have been a source of concern for many years, and not just in credit cards. RFID chips in all US passports issued after 2006 track your photo and information. RFID chips are embedded in metro cards for quick swiping, and RFID chips are implanted in dogs for tracking. RFID chips communicate by using radio waves. An RFID tag with information is embedded in the object, such as a credit card, and an RFID reader  uses radio waves to read the information from the tag. The key point is that RFID chips have tiny electromagnetic fields, which allows them to be read without having to "initiate" communications. The RFID reader  only needs to be close enough to the field to work. As a result, someone could theoretically scan a card through your pocket. And, yes, people have been scanned in the real world in this manner. Check out this Reddit anecdote to see what kind of headache RFID hackers can cause. Fortunately, radio waves can be easily interrupted and blocked, which is how an RFID-blocking wallet works. They encase your credit cards in a radio-interfering material. If the wallet is constructed properly as a Faraday cage, it will block all electromagnetic fields and prevent communication between your cards and RFID scanners. But do YOU really require an RFID-blocking wallet? Most likely not. If your credit cards do not have RFID chips, you obviously do not require one. Even if you do have RFID-enabled cards, the chances of being scanned maliciously are extremely low—-less than 1%, according to some. On the other hand, the possibility exists at all times, and the probability is non-zero.   6.3 The 5 Best RFID-Blocking Wallets Saddleback Passport WalletBig Skinny Slimline WalletTrayvax Original WalletSharkk Rugged WalletRadix One Black Steel   Ⅶ RFID Asset Tracking  As a company that depends on the availability of high-value assets to generate revenue, you understand the significance of asset tracking and effective inventory management. Whether it's inventory, tools, IT equipment, vehicles, or even employees. 7.1 What Is RFID Asset Tracking  ? RFID asset tracking is a technique for automating the management and location of physical assets. It works by loading data onto an RFID tag and attaching it to a relevant asset. This information can range from name, condition, amount, and location. An RFID reader  can capture the stored data by using the RFID tag's repeatedly pulsating radio waves. Eventually, it will be collected in a sophisticated asset tracking system, where the data can be monitored and acted upon. The ability to automate your tracking and monitoring processes seeks to eliminate the highly error-prone methods of pen-and-paper and excel spreadsheets.Among other benefits such as: Tracking multiple assets at any one timeEliminating human interventionCollecting data in real-timeImproving asset visibilityLocating lost or misplaced assetsMaximising accuracy of inventory   7.2 How Does RFID Asset Tracking  Work? The basic principles of how an RFID tracking system works are very similar whether it is used in agriculture to track livestock or in a warehouse to monitor a manufacturer's supply chain. First, you'll need the right tools: RFID Tags (Passive, Active, or Semi-Passive)An AntennaAn RFID ReaderA computer database equipped with Asset Tracking Software The RFID asset tracking process can be divided into four stages once the proper equipment is in place: The data is stored on an RFID tag that has a unique  Electronic Product Code  (EPC) and is attached to an asset. An antenna  detects a nearby RFID tag's signal. An RFID reader is wirelessly connected to the antenna  and receives the data stored on the RFID tag. The data is then transmitted by the RFID reader to an asset tracking database, where it is stored, evaluated, and acted upon. The initial process is relatively simple, depending on how you choose to deploy your RFID asset tracking system. However, there are a variety of factors to consider when selecting the right hardware.   Ⅷ RFID Vs. NFC: The 5 Key Differences Even though both technologies appear similar on the surface, there are five key differences between them. The Reading Range NFC technology operates on a limited range, also known as proximity. RFID, on the other hand, can read tags from up to 10 meters away, making it the best solution for vehicle identification and access. Check out our Automatic Vehicle Identification Guide if you want to learn more about long-term solutions. Communication Because NFC is capable of two-way communication, it can provide novel and complex solutions such as card emulation and peer-to-peer. Speed With NFC technology, unlike RFID tags.  only one tag can be read at a time. As a result, RFID tags are often better suited to environments with a high concentration of trackable components. Asset management in a manufacturing facility or tracking fast-moving vehicles is two examples. Data NFC technology stores and transmits a variety of data types. NFC devices, with their larger storage capacity, can store and transmit more data than RFID devices, which can only carry simple ID information. As a result, NFC is better suited to environments where payment details, membership, and ticket information, among other things, must be transferred. The cost-effectiveness NFC-based readers  are less expensive than long-range RFID solutions due to their limited reading range. As a result, NFC is an excellent choice for businesses on a tight budget who still require a high-quality solution. Ⅸ FAQ 1. Can you be tracked through RFID? The answer was an electronic lock, and the company has given its handful of employees the option of using an electronic key or getting an RFID chip implanted in their arm. "It can't be read, it can't be tracked, it doesn't have GPS," Darks said. 2. Can RFID be hacked? RFID hackers have demonstrated how easy it is to get hold of information within RFID chips. As some chips are rewritable, hackers can even delete or replace RFID information with their own data. ... It's easy to purchase the parts for the scanner, and once built, someone can scan RFID tags and get information out of them. 3. Why is RFID bad? The other problem with RFID chips versus, say, embedded smart chips is that as wireless devices they don't need to be near the reader to be read. Smart chips, on the other hand, need to be put next to, or into, a reader, so they aren't as susceptible to being sniffed in the open. 4. How is RFID powered? Active RFID tags have a transmitter and their own power source (typically a battery). ... Instead, they draw power from the reader, which sends out electromagnetic waves that induce a current in the tag's antenna. Semi-passive tags use a battery to run the chip's circuitry, but communicate by drawing power from the reader. 5. What is RFID example? For example, an RFID tag attached to an automobile during production can be used to track its progress through the assembly line, RFID-tagged pharmaceuticals can be tracked through warehouses, and implanting RFID microchips in livestock and pets enables positive identification of animals. 6. How do I know if I have an RFID chip? The best way to check for an implant would be to have an X-ray performed. RFID transponders have metal antennas that would show up in an X-ray. You could also look for a scar on the skin. Because the needle used to inject the transponder under the skin would be quite large, it would leave a small but noticeable scar. 7. Do credit cards have RFID? RFID-enabled credit cards - also called contactless credit cards or “tap to pay” cards - have tiny RFID chips inside of the card that allow the transmission of information. ... Though many new credit cards are RFID-enabled, not all of them are. On the other hand, all newly-issued credit cards come with an EMV chip.

Introduction Biomedical sensors are conversion devices that convert physiological information of the human body into electrical information that has a definite functional relationship with it. The information it picks up is the physiological information of the human body, and its output is often expressed in electrical signals by sensors. Figure 1. Health Care with Sensors Catalog Introduction Ⅰ Working Principle Ⅱ Biomedical Sensor Characteristics Ⅲ Classifications Ⅳ Biomedical Sensors Functions Ⅴ Biomedical Sensors Applications 5.1 Patient Lift Chair 5.2 Sports Rehabilitation Machine 5.3 Artificial Prosthesis 5.4 Infusion Pump 5.5 Baby Incubator 5.6 Infrared Thermometer Ⅵ Biomedical Sensors Development Ⅶ FAQ Ⅰ Working Principle In modern medicine, biomedical sensors actually replace the doctor’s sensory organs and play an extended role. It has become a key technology that restricts the development of high-level advanced medical equipment. The important technological foundation of the information society. There are two types of human physiological information: electrical information and non-electrical information. In terms of distribution, there are internal (such as blood pressure and other types of pressure), body surface (such as various types of bioelectricity such as ECG) and the external (such as infrared, biomagnetism, etc.).   Ⅱ Biomedical Sensor Characteristics As an important branch of sensors, the design and application of biomedical sensors must consider the influence of human factors, such as the particularity and complexity of biological signals, and the biocompatibility, reliability and safety of biobiomedical sensors.1) The sensor itself has good technical performance, such as sensitivity, linearity, hysteresis, repeatability, frequency response range, signal-to-noise ratio, temperature drift, zero drift, sensitivity drift, etc.2) The shape and structure of the sensor should be adapted to the anatomical structure of the tested part, and the damage to the tested tissue should be small.3) The sensor has a small impact on the measured object. In other words, it will not bring a burden to physiological activities, and does not interfere with normal physiological functions of humans.4) The sensor must have enough firmness so that it will not fall off or be damaged when use it.5) The sensor and the human body must have sufficient electrical insulation to ensure the safety.6) When the sensor enters the human body, it can adapt to the chemical action in the biological body. For example, it is compatible with the chemical composition in the biological body, is not easy to be corroded, has no adverse irritation to the human body, and is non-toxic.7) If the sensor enters the blood or is buried in the body for a long time, it should not cause blood problem.8) The sensor should be simple to operate, easy to maintain, and easy to sterilize in structure. Figure 2. Health Monitoring with Biobiomedical Sensor Ⅲ Classifications 1. According to the working principle:🔺Chemical sensorUse the principle of chemical reaction to convert chemical composition and concentration into electrical signals.🔺Biological sensorUse the selective identification of biologically active substances to determine biochemical substances.🔺Physical sensorTake advantage of physical changes in materials.🔺Bioelectric electrode sensorUse the body's various bioelectricity (cardioelectricity, brain electricity, myoelectricity, neuron discharge, etc.).2. According to the type of detection:Displacement sensor, flow sensor, temperature sensor, speed sensor, pressure sensor, etc. For pressure sensors, including metal strain gauge pressure sensors, semiconductor pressure sensors, capacitive pressure sensors, etc. For temperature sensors, including thermistors, thermocouples, PN junction temperature sensors and other sensors that can detect temperature.3. According to human senses:1) Vision SensorIncluding various optical sensors and other sensors that can replace vision functions.2) Hearing SensorIncluding various pickups, piezoelectric sensors, capacitive sensors and other sensors that can replace auditory functions.3) Olfactory SensorInclude various gas-sensitive sensors, and sensors that can replace the olfactory function.This classification method is conducive to the development of bionic sensors. In addition to the widely used sensor classification methods, there are also multiple classification standards based on sensor materials, structures, energy conversion fractions, etc., all with their own advantages and limitations.   Ⅳ Biomedical Sensors Functions (1) Provide diagnostic information, such as heart sounds, blood pressure, pulse, blood flow, respiration, body temperature and other information for clinical diagnosis and medical research.(2) Monitoring: Long-term continuous measurement of certain parameters, monitoring whether these parameters are within the specified range, in order to check the patient's recovery process, and take actions when abnormalities occur. For example, after a heart operation, it is necessary to monitor changes in a series of parameters such as body temperature, pulse, arterial pressure, venous pressure, respiration, and electrocardiogram of a patient.(3) Human body control: Use the detected parameters to control the physiological process of the human body. For example, an automatic respirator uses a sensor to detect the patient’s breathing signal to control the movement of the respirator to synchronize the breathing of the human. Another example is the electronic prosthesis, which uses the measured electromyographic signal to control the movement of the human prosthesis. What’s more, have the blood flow and blood pressure control of cardiopulmonary bypass.(4) Clinical tests: In addition to collecting information directly from the human body, diagnostic information is often obtained from various body fluids (blood, urine, saliva, etc.) samples. This type of information is called biochemical test information. It is obtained by using chemical sensors and biosensors, and is an indispensable basis for diagnosing various diseases. Figure 3. Tiny Biobiomedical Sensor Ⅴ Biomedical Sensors Applications 5.1 Patient Lift Chair Electric chair lifts can provide a safe and efficient way to transfer patients from one place to another, helping to ensure the safety of patients. These basic equipment can greatly reduce the burden on nursing staff when using other transfer methods to keep on patient safety and comfort. These chairs have a lightweight and portable design and are suitable for many medical care environments. For example, modern versions of these chairs also incorporate load cells to further enhance their performance. The weighing sensor designed to measure the weight of the patient can be connected to an alarm, and when the load exceeds the safety upper limit, an alarm will be issued to the health staff immediately. 5.2 Sports Rehabilitation Machine Usually used in physiotherapy, these machines are usually used to exercise the patient's muscles as part of the therapy to restore the patient's motor skills and mobility after the patient has suffered a stroke or sports injury. With our advanced technology, modern rehabilitation machines can now provide intelligent sensing capabilities to detect the movement of patients. By integrating load cells, we are now able to provide the controller with the real-time feedback needed to predict the patient's next movement. The intelligent resistance control can increase or decrease the resistance of the exercise machine according to the force measured from the patient's actions, thereby promoting the patient's muscle growth in the most suitable way. The load cell can also be used to measure the weight of the patient, so that the rehabilitation machine can estimate the height of the patient, and pre-position the handle of the machine at the correct level in an efficient manner. 5.3 Artificial Prosthesis After a long period of development, artificial prostheses have been improved in many aspects, from the comfort of materials to the integration of electromyographic control using electrical signals generated by the wearer’s own muscles, to the fact that artificial prostheses are extremely realistic in appearance and have the same skin texture. Even match pigments and details such as hair level, nails and texture.With the integration of advanced sensors into artificial prostheses, further improvements can be brought about. They are aimed at enhancing the natural movement of artificial prostheses for arms and legs, and providing the correct amount of strength assistance during exercise. Our solutions include weighing sensors and custom force sensors that can be built into artificial prostheses. These sensors can measure the pressure of each patient's movement, thereby automatically changing the resistance of the artificial prosthesis. This feature allows patients to adapt and perform daily tasks in a more natural way. 5.4 Infusion Pump It is the most commonly used and basic tool in the medical environment and can achieve flow rates from 0.01 mL/hr to 999 mL/hr. Our customized solutions help reduce errors and achieve the goal of providing high-quality and safe patient care. And the solution can provide reliable feedback to the infusion pump to ensure continuous and accurate drug delivery, and the liquid is delivered to the patient in a timely and accurate manner, reducing the supervision workload of medical staff. 5.5 Baby Incubator Rest and reducing bacterial exposure are key factors for newborn care. Therefore, the baby incubator is designed to protect weak babies by providing a safe and stable environment. The load cell is incorporated into the incubator to achieve accurate real-time weight measurement without affecting the baby's rest or exposing the baby to the external environment. 5.6 Infrared Thermometer It is a kind of devices with non-contact temperature sensor, its sensitive element and the measured object are not in contact with each other, also known as non-contact temperature measuring instrument. This kind of instrument can be used to measure the surface temperature of moving objects, small targets and objects with small heat capacity or rapid temperature changes (transient), and it can also be used to measure the temperature distribution of the certain field. In today's outbreak of COVID-19, physical contact has been minimized and the spread of bacteria and viruses has been reduced greatly.   Ⅵ Biomedical Sensors Development Among them, the research and development of the sensor itself has two branches. One is related to the basic research of the sensor, that is, the research on the new technology and new principles required by the sensor.In recent years, the development of medical sensor products has become more and more popular, and the productization of sensor technology in the field of medical equipment products has become increasingly popular. Innovative medical products such as wearables, artificial intelligence AI, surgical robots, etc. are emerging in an endless stream. Modern medical sensor technology has got rid of the technical shortcomings of traditional biomedical sensors such as large size and poor performance, and has formed new development directions such as intelligence, miniaturization, multi-parameter, remote control, and non-invasive detection.The development of biomedical sensors is already one of the key technologies restricting the development of high-end and advanced medical equipment, and it is also one of the main driving forces to promote the development of medicine.   Ⅶ FAQ 1. Why are sensors used in healthcare?Sensors are used in electronics-based medical equipment to convert various forms of stimulation electrical signals for analysis. Sensors can increase the intelligence of medical equipment, such as life-supporting implants, and can enable bedside and remote monitoring of vital signs and other health factors. 2. What sensors are used in patient monitoring system?Thus, different types of sensors can be used (e.g., GPS receiver, accelerometer, ECG, blood pressure, blood glucose, body temperature, and breathing sensor). 3. What are the sensors used in biomedical applications?Biomedical sensor classification. Many different kinds of sensors can be used in biomedical application.Oxygen and carbon dioxide sensor for blood.Heart sound sensor.Blood flow sensor.Respiration sensor.Blood pressure sensor.Electrochemical electrode. 4. What is the main difference between biosensors and biomedical sensors?Biosensors, which can be considered a special subclassification of biomedical sensors, are a group of sensors that have two distinct components: a biological recognition element, such as a purified enzyme, antibody, or receptor, that functions as a mediator and provides the selectivity. 5. Can biomedical sensors be placed anywhere inside the body?Biosensors can be placed inside your body as well. Dr. Natalie Wisniewski, a biomedical engineer at a medical device company in San Francisco called Profusa, is developing miniature sensors that can be injected under the skin. These sensors automatically track chemicals in your body without drawing blood. 6. What are the types of biomedical sensor?While talking about biomedical engineering, we come across biomedical sensor terminology, which is then divided into three types: physical sensors, chemical sensors, and biosensors. Physical sensors are used to evaluate blood pressure, biologic magnetic field, etc. 7. Which sensors are used in biomedical applications?There are different types of physical sensors used for biomedical applications: Radiation sensors address the X-ray and gamma ray-based sensors, Mechanical sensors include ultrasound and pressure sensor Thermal sensors include a range of sensors such as thermocouple, thermistor, thermopile, optical fiber devices, P-N. 8. What are biomedical sensors used for?In medicine and biotechnology, biomedical sensors are used to detect specific biological, chemical, or physical processes, which then transmit or report the monitored data. These sensors can also be components in systems that process clinical samples, such as increasingly common lab-on-a-chip devices. 9. What sensors are used in hospitals?Types of medical sensorsThe primary sensors used within medical devices are pressure, force, airflow, oxygen, pulse oximetry, temperature, and barcode sensing. The above sensors play a critical role in the operation of the equipment. 10. What sensors are used in patient monitoring system?Thus, different types of sensors can be used (e.g., GPS receiver, accelerometer, ECG, blood pressure, blood glucose, body temperature, and breathing sensor). 11. What are the temperature sensors?A temperature sensor is a device used to measure temperature. This can be air temperature, liquid temperature or the temperature of solid matter. There are different types of temperature sensors available and they each use different technologies and principles to take the temperature measurement.

Introduction An oscillator is an electronic component used to generate an oscillating signal. The circuit composed of it is called an oscillating circuit, which can convert direct current into an electronic circuit or device with a certain frequency of alternating current signal. It is widely used in electronics industry, medical treatment, scientific research, etc. Catalog Introduction Ⅰ Oscillator Basics 1.1 Oscillator Meaning 1.2 Classification Rules Ⅱ Examples: RC Oscillator, LC Oscillator and Crystal Oscillator 2.1 RC Oscillator 2.2 LC Oscillator 2.3 Crystal Oscillator Ⅲ Selection Rules Ⅳ FAQ Ⅰ Oscillator Basics 1.1 Oscillator Meaning The oscillator is simply a frequency source and generally used in a phase-locked loop. In detail, it is a device that can convert DC power into AC power without external signal excitation. Generally divided into two types: positive feedback and negative resistance. The so-called oscillation, its meaning alludes to AC, and the oscillator includes a process and function starting from scratch. In other words, it can complete the conversion from DC power to AC power, such a device can be called an oscillator. 1.2 Classification Rules Oscillators are widely used, and there are many types:According to the oscillation frequency: high frequency oscillator, and low frequency oscillator.According to the oscillation waveform: sine wave oscillator, and non-sine wave oscillator.According to the oscillation feedback: positive feedback oscillator, and negative resistance oscillator.   Ⅱ Examples: RC Oscillator, LC Oscillator and Crystal Oscillator Electronic Oscillators || RC, LC, Crystal 2.1 RC Oscillator In a resistance-capacitance oscillator or short for RC oscillator, by using RC components in the feedback branch, a phase shift occurs between the input of the RC network and the output from the same network. The input is again moved through the second inverting stage, giving a phase shift, which is the same as providing the required positive feedback. It is suitable for low frequency oscillation, and is generally used to generate low frequency signals of 1Hz to 1MHz. The circuit is composed of four parts: amplifying circuit, frequency selection network, positive feedback network, and amplitude stabilization. The main advantages of it are simple structure, economic and convenient, and belong to the audio frequency oscillator. Figure 1. RC Oscillator Circuit (1) Vibration ProcessWhen the power is just turned on, there are various electrical disturbances in the circuit, and a relatively large feedback voltage is generated through feedback through the frequency selection network. Passing through the continuous loop of linear amplification and feedback, the oscillation voltage will continue to increase.(2) Oscillation FrequencyThe oscillation frequency is determined by the phase balance condition., Only meets the phase balance condition at f0, the oscillation frequency is .Changing R and C can change the oscillation frequency.(3) Conditions for Start-up and Stable OscillationTaking into account the starting conditions of AuF>1, generally Rt should be selected slightly larger than 2R1. If this value is too large, it will cause serious distortion of the oscillation waveform.The RC series-parallel sine-wave oscillator circuit composed of an op amp does not rely on the transistor inside the op amp to enter the nonlinear region to stabilize the amplitude, but to achieve the purpose of amplitude stabilization by introducing negative feedback from the outside.(4) Stable AmplitudeThe growth process of the oscillation amplitude cannot continue forever, when the amplifier gradually enters the saturation or cut-off zone from the amplification zone. Working in a non-linear state, its gain gradually decreases. When the amplifier gain decreases and the loop gain decreases to 1, the amplitude increase process will stop and the oscillator will reach equilibrium.For the RC oscillator circuit, increasing the resistance can reduce the oscillation frequency, and it does not need to increase the cost. The frequency of the sine wave generated by the commonly used LC oscillation circuit is relatively high. If a low frequency sine oscillation is to be generated, the oscillation circuit must have a larger inductance and capacitance. This will not only cause the components to be bulky, heavy, and inconvenient to install, but also difficult to manufacture with high cost. Therefore, the sinusoidal oscillation circuit below 200kHz generally adopts an RC oscillation circuit with a lower oscillation frequency.   2.2 LC Oscillator LC oscillator is also called LC oscillating circuit, resonance circuit, tank circuit or tuning circuit. It consists of a capacitor and a parallel coil. The circuit has an inductor L and a capacitor C. Capacitors store energy in the form of electrostatic fields and generate potential on their plates, while inductance coils store energy in the form of electromagnetic fields. By placing the switch in a specific position, the capacitor is charged to the DC supply voltage. When the capacitor is fully charged, the switch is switched to a certain position, and the charged capacitor is connected in parallel to the inductor coil, so the capacitor starts to discharge itself through the coil. Figure 2. LC Oscillator Circuit The LC circuit is not only used to generate a specific frequency signal, but also used to separate a specific frequency signal from a more complex signal. They are key components in many electronic equipment, especially radio equipment, used in oscillators, filters, tuners and mixer circuits.The inductive circuit is an idealized model because it assumes that there is no energy dissipated due to resistance. The actual realization of any LC circuit will include the loss caused by the small but non-zero resistance of the components and connecting wires. The purpose of an LC circuit is usually to minimize oscillations, so the resistance is made as small as possible. Although there is no lossless circuit in practice, studying the ideal form of this circuit is beneficial to study physical phenomenon.When electromagnetic oscillation occurs in an oscillating circuit, if there is no energy loss and no external influences, the period and frequency of it at this time are called the natural frequency and natural period of the oscillating circuit. The natural period can be obtained by the following formula: Where, the time constant is L/R. What are LC Oscillations? 2.3 Crystal Oscillator Some electronic devices require an AC signal with a highly stable frequency, but the LC oscillator has poor stability and the frequency is easy to drift (that is, the frequency of the generated AC signal is easy to change). A special component-quartz crystal is used in the oscillator, which can generate a highly stable signal. This kind of oscillator that uses a quartz crystal is called a crystal oscillator. It is mainly composed of a crystal and peripheral components. In a crystal oscillator, the main frequency determining element is a quartz crystal. Due to the inherent characteristics of the quartz crystal oscillator, it has extremely high frequency stability. Temperature compensation may be related to the crystal oscillator to improve the thermal stability. Because it is a fixed frequency oscillator, stability and accuracy are the basic considerations when use it. Figure 3. Crystal Oscillator Circuit The crystal oscillator has a piezoelectric effect, that is, the crystal will deform when a voltage is applied to the two poles of the wafer. Conversely, if an external force deforms the wafer, the metal sheets on the two poles will generate voltage. If an appropriate alternating voltage is applied to the chip, the chip will resonate (the resonance frequency is related to the tilt angle of the quartz slope, etc., and the frequency is constant). The crystal oscillator uses a crystal that can convert electrical energy and mechanical energy into each other. It can provide stable and accurate single-frequency oscillation when working in a resonance state. Under normal working conditions, the absolute accuracy of ordinary crystal oscillator frequencies can reach 50 parts per million. Using this feature, the crystal oscillator can provide a more stable pulse, which is widely used in the clock circuit of the microchip. In addition, the wafers are mostly quartz semiconductor materials, and the shell is encapsulated with metal.The main parameters of the crystal oscillator include nominal frequency, load capacitance, frequency accuracy, frequency stability, etc. These parameters determine the quality and performance of the crystal oscillator. Therefore, in practical applications, an appropriate crystal oscillator should be selected according to specific requirements. For example, systems such as communication networks and wireless data transmission require high-precision crystal oscillators. However, since the higher the performance of the crystal oscillator is, the more expensive it is, so you can choose a crystal that meets the requirements when buying.   Ⅲ Selection Rules Oscillators are used in many electronic products. In order to ensure the normal operation of electronic products, the selection of oscillators is important. The following summarizes the five selection rules for reference.1) Appearance InspectionBy checking the appearance of the product, whether the marking text is clear and standard, whether there are cracks on the surface of the appearance, and whether the pins have been soldered. If the product is found to be imperfect on the outside, it should not be used.2) FrequencyChoose the appropriate frequency according to the actual product requirements. The frequency is the most important, and it cannot be replaced casually. Negotiations must be conducted after passing the qualification verification or professional test. If the frequency required by the actual circuit is 5MHZ, do not replace it with a similar frequency without any original replacement.3) Output ModeWhen choosing a oscillator, consider the type of oscillator output required by the circuit, which generally divided into level output and differential output. As for level output, CMOS is the most commonly used type, and in terms of differential output, LVPECL(Low Voltage Positive Emitter-Couple Logic) and LVDS (Low-Voltage Differential Signaling) are commonly used differential output type. Different output types cannot be changed randomly, especially differential and ordinary oscillators.4) ModelTo use the oscillator, you must see the model mark of the shell. The model number indicates its multiple parameters. According to the product requirements, the corresponding product parameters can be found, and the same model can be found later. If the crystal oscillator model is not selected properly, it will cause errors in the application.5) ReplacementIf an oscillator is damaged, it should be replaced by the original model in principle. When the original model is not available, it is best to consider replacing it with another model or other type of oscillator after testing.   Ⅳ FAQ 1. What is oscillator and its types?An oscillator is a type of circuit that controls the repetitive discharge of a signal, and there are two main types of oscillator; a relaxation, or an harmonic oscillator. This signal is often used in devices that require a measured, continual motion that can be used for some other purpose. 2. What are the types of oscillator in electronics?There are two main types of electronic oscillator – the linear or harmonic oscillator and the nonlinear or relaxation oscillator. 3. How many types of oscillations are there?There are 3 main types of Oscillation – Free, damped, and forced oscillation. When a body vibrates with its own frequency, it is called a free oscillation. 4. What is RC and LC oscillator?The oscillation frequency is proportional to the inverse of the capacitance or resistance, whereas in an LC oscillator the frequency is proportional to inverse square root of the capacitance or inductance. So a much wider frequency range can be covered by a given variable capacitor in an RC oscillator. 5. What is the principle of oscillator?There are many types of electronic oscillators, but they all operate according to the same basic principle: an oscillator always employs a sensitive amplifier whose output is fed back to the input in phase. Thus, the signal regenerates and sustains itself. This is known as positive feedback. 6. What are the three types of oscillator?The main types of Oscillators include: Wien Bridge Oscillator. RC Phase Shift Oscillator. Hartley Oscillator. 7. What is the use of LC oscillator?LC oscillators are used in heating with high-frequency, RF generators, radios, TV receivers, etc. These types of oscillators use tank circuits including the components like a capacitor (C) and an inductor (L). 8. What does RC oscillator do?RC oscillators are a type of feedback oscillator; they consist of an amplifying device, a transistor, vacuum tube, or op-amp, with some of its output energy fed back into its input through a network of resistors and capacitors, an RC network, to achieve positive feedback, causing it to generate an oscillating. 9. What is RC phase oscillator?RC phase-shift oscillators use resistor-capacitor (RC) network to provide the phase-shift required by the feedback signal. They have excellent frequency stability and can yield a pure sine wave for a wide range of loads. ... Further, the circuit also shows three RC networks employed in the feedback path. 10. What are the advantages of RC oscillator?The RC phase shift oscillator gives good Frequency stability. The output of this circuit is sinusoidal that is quite distortion free.. It is suitable for lower frequencies and this lower limit exists in as low as 1Hz. RC phase shift oscillators don't require any negative feedback and stabilization arrangements. 11. What is a crystal oscillator used for?A crystal oscillator is an electronic oscillator circuit that is used for the mechanical resonance of a vibrating crystal of piezoelectric material. It will create an electrical signal with a given frequency. 12. What are the advantages of crystal oscillator?The Advantages of a Crystal OscillatorStability. Stability is one of the most important requirements of any oscillator.High Q. The Q factor or quality factor describes how 'underdamped' oscillators are.Frequency Customization and Range.Low Phase Noise.A Crystal Oscillator Is Compact and Inexpensive. 13. What is crystal oscillator explain?A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a constant frequency. ... Quartz crystals are manufactured for frequencies from a few tens of kilohertz to hundreds of megahertz.