The Kynix Components

CatalogDescriptionCAD ModelsPin AssignmentsAnalog SymbolFeaturesApplicationsDatasheetProduct AttributesManufacturerUsing WarningFrequently Asked QuestionsDescriptionThe FSUSB42 is a bi-directional, low -power, two-port, high-speed, USB2.0 switch. Configured as a double-pole, double-throw switch (DPDT) switch, it is optimized for switching between any combination of high-speed (480 Mbps) or Full-Speed (12 Mbps) sources. The FSUSB42 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.7 pF. The wide bandwidth of this device (720 MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference. The FSUSB42 contains special circuitry on the switch I/O pins for applications where the VCC supply is powered-off (VCC=0 V), which allows the device to withstand an over-voltage condition. This device is designed to minimize current consumption even w hen the control voltage applied to the SEL pin is low er than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications, such as cell phones, allowing for direct interface with the general- purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers. CAD Models Figure: PCB Symbol  Figure: Footprint  Figure: 3D Model Pin Assignments  Figure: Pin Assignments Analog Symbol Figure: Analog Symbol FeaturesLow On Capacitance: 3.7 pF TypicalLow On Resistance: 3.9 Ω TypicalLow Pow er Consumption: 1 μA Maximum        -15 μA Maximum ICCT over an Expanded Voltage Range (VIN=1.8 V, VCC=4.4 V)Wide -3 db Bandwidth: > 720 MHzPackaged in:        -10-Lead UMLP (1.4 x 1.8 mm)        -10-Lead MSOP8 kV ESD Rating, >16 kV Pow er / GND ESD RatingOver-Voltage Tolerance (OVT) on all USB Ports Up to 5.25 V without External Components ApplicationsCell phone, PDA, Digital Camera, and NotebookLCD Monitor, TV, and Set-Top Box DatasheetYou can download the datasheet from the link given below:FSUSB42MUX-Datasheet Product AttributesManufacturer:onsemiProduct Category:USB Switch ICsProduct:USB 2.0 SwitchesConfiguration:2 x DPDTOn Resistance - Max:7.5 OhmsOn Time - Max:40 nsOff Time - Max:35 nsOperating Supply Voltage:2.4 V to 4.4 VMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature:+ 85 ℃Mounting Style:SMD/SMTPackage / Case:MSOP-10Packaging:ReelPackaging:Cut TapePackaging:MouseReelBandwidth:720 MHzBrand:onsemi / FairchildNumber of Switches:2 SwitchOperating Supply Current:1 uAProduct Type:USB Switch ICsSeries:FSUSB42Factory Pack Quantity:4000Subcategory:Switch ICsSupply Voltage - Max:4.4 VSupply Voltage - Min:2.4 VUnit Weight:0.004233 oz ManufacturerON Semiconductor is an American semiconductor supplier company, formerly in the Fortune 500, but dropping into the Fortune 1000 (ranked 512) in 2020.Products include power and signal management, logic, discrete, and custom devices for automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power applications. ON Semiconductor runs a network of manufacturing facilities, sales offices and design centers in North America, Europe, and the Asia Pacific regions. Headquartered in Phoenix, Arizona, ON Semiconductor has revenues of $3.907 billion (2016),which puts it among the worldwide top 20 semiconductor sales leaders. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. Frequently Asked QuestionsWhat can you do with a USB switch?A USB switch allows two or more computers to easily share a USB peripheral such as external hard drives, printers, and scanners. The USB switch saves you cost and space on additional USB devices. On the other hand, it eliminates the need to unplug the USB peripheral from one computer and then plug it into the other. How many USB devices can a USB switch handle?USB device ab switches support high speed data while maintaining a small size to handle large equipment, USB printers, scanners or other peripherals or computers. A USB switch box allows up to four computers to manually share a USB device; or when used in conjunction with a USB hub, can share multiple USB devices. How big is a USB 2.0 data switch?The device switch allows 4 computers to share one device with a manual push button while maintaining USB 2.0 high speed, or HOT-Key selector via the provided sharing software. This USB port data switch includes (1) 5.0ft Long USB 2.0 certified cable. Please see product details to view volume discounts. 

CatalogProduct OverviewSTM32F777BIT6 CAD ModelsSTM32F777BIT6 PinoutSTM32F777BIT6 Block DiagramSTM32F777BIT6 FeaturesSTM32F777BIT6 ApplicationsSTM32F777BIT6 DatasheetSTM32F777BIT6 SpecificationsSTM32F777BIT6 ManufacturerUsing WarningSTM32F777BIT6 FAQProduct OverviewThe STM32F777xx, STM32F778Ax and STM32F779xx devices are based on the high performance Arm® Cortex®-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex®-M7 core features a floating point unit (FPU) which supports Arm® double-precision and single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security. The STM32F777xx, STM32F778Ax and STM32F779xx devices incorporate high-speed embedded memories with a Flash memory up to 2 Mbytes, 512 Kbytes of SRAM (including 128 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access. All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, a true random number generator (RNG), and a cryptographic acceleration cell. STM32F777BIT6 CAD ModelsFigure: STM32F777BIT6 Footprint  Figure: STM32F777BIT6 3D Models  STM32F777BIT6 PinoutFigure: STM32F777BIT6 Pinout STM32F777BIT6 Block DiagramFigure: STM32F777BIT6 Block Diagram STM32F777BIT6 Features1)Core: Arm® 32-bit Cortex®-M7 CPU with DPFPU, ART Accelerator™ and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions. 2)Memories– Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write– SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM– Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories 3)Dual mode Quad-SPI 4)Graphics– Chrom-ART Accelerator™ (DMA2D), graphical hardware accelerator enabling enhanced graphical user interface– Hardware JPEG codec– LCD-TFT controller supporting up to XGA resolution– MIPI® DSI host controller supporting up to 720p 30 Hz resolution 5)Clock, reset and supply management– 1.7 V to 3.6 V application supply and I/Os– POR, PDR, PVD and BOR– Dedicated USB power– 4-to-26 MHz crystal oscillator– Internal 16 MHz factory-trimmed RC (1% accuracy)– 32 kHz oscillator for RTC with calibration– Internal 32 kHz RC with calibration 6)Low-power– Sleep, Stop and Standby modes– VBAT supply for RTC, 32×32 bit backup registers + 4 Kbytes backup SRAM 7)3×12-bit, 2.4 MSPS ADC: up to 24 channels 8)Digital filters for sigma delta modulator (DFSDM), 8 channels / 4 filters 9)2×12-bit D/A converters 10)General-purpose DMA: 16-stream DMA controller with FIFOs and burst support 11)Up to 18 timers: up to thirteen 16-bit (1x lowpower 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer 12)Debug mode– SWD & JTAG interfaces– Cortex®-M7 Trace Macrocell™ 13)Up to 168 I/O ports with interrupt capability– Up to 164 fast I/Os up to 108 MHz– Up to 166 5 V-tolerant I/Os 14)Up to 28 communication interfaces– Up to 4 I2C interfaces (SMBus/PMBus)– Up to 4 USARTs/4 UARTs (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)– Up to 6 SPIs (up to 54 Mbit/s), 3 with muxed simplex I2S for audio– 2 x SAIs (serial audio interface)– 3 × CANs (2.0B Active) and 2x SDMMCs– SPDIFRX interface– HDMI-CEC– MDIO slave interface 15)Advanced connectivity– USB 2.0 full-speed device/host/OTG controller with on-chip PHY– USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI– 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII 16)8- to 14-bit camera interface up to 54 Mbyte/s 17)Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC 18)True random number generator 19)CRC calculation unit 20)RTC: subsecond accuracy, hardware calendar 21)96-bit unique ID STM32F777BIT6 Applications1)Motor drive and application control 2)Medical equipment 3)Industrial applications: PLC, inverters, circuit breakers 4)Printers, and scanners 5)Alarm systems, video intercom, and HVAC 6)Home audio appliances 7)Mobile applications, Internet of Things 8)Wearable devices: smartwatches STM32F777BIT6 DatasheetYou can download the datasheet from the link given below:DatasheetSTM32F777BIT6 SpecificationsTypeDescriptionCategoryIntegrated Circuits (ICs)Embedded - MicrocontrollersMfrSTMicroelectronicsSeriesSTM32F7Part StatusActiveCore ProcessorARM® Cortex®-M7Core Size32-BitSpeed216MHzConnectivityCANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, MMC/SD/SDIO, QSPI, SAI, SPDIF, SPI, UART/USART, USB OTGPeripheralsBrown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDTNumber of I/O159Program Memory Size2MB (2M x 8)Program Memory TypeFLASHRAM Size512K x 8Voltage - Supply (Vcc/Vdd)1.7V ~ 3.6VData ConvertersA/D 24x12b; D/A 2x12bOscillator TypeInternalOperating Temperature-40°C ~ 85°C (TA)Mounting TypeSurface MountPackage / Case208-LQFPSupplier Device Package208-LQFP (28x28)Base Product NumberSTM32F777  STM32F777BIT6 ManufacturerSTMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. STM32F777BIT6 FAQWhat is a microcontroller?Microcontroller is a compressed micro computer manufactured to control the functions of embedded systems in office machines, robots, home appliances, motor vehicles, and a number of other gadgets. A microcontroller is comprises components like - memory, peripherals and most importantly a processor. What is a microcontroller used for?In the office, microcontrollers are used in computer keyboards, monitors, printers, copiers, fax machines, and telephone systems to name a few. In your home, microcontrollers are used in microwave ovens, washers and dryers, security systems, lawn sprinkler station controllers, and music/video entertainment components. What is microcontroller and its uses?A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used as an embedded system. The majority of microcontrollers in use today are embedded in other machinery, such as automobiles, telephones, appliances, and peripherals for computer systems. 

CatalogDescriptionCAD ModelsPin ConfigurationFeaturesApplicationsApprovalsDatasheetProduct AttributesManufacturerUsing WarningFrequently Asked QuestionsDescriptionThe CPC1017N is a miniature single-pole, normally-open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The super-efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging enables CPC1017N to be one of the world’s smallest relays. It offers board space savings of at least 20% over the competitor’s larger 4-pin SOP relay. CAD Models Figure: PCB Symbol  Figure: Footprint  Figure: 3D Model Pin Configuration Figure: Pin Configuration FeaturesDesigned for Use in Security Systems Complying with EN50130-4Only 1mA of LED Current Required to Operate1500VrmsInput/Output IsolationHigh ReliabilityArc-Free With No Snubbing CircuitsNo EMI/RFI GenerationImmune to Radiated EM FieldsHalogen FreeTape & Reel Version AvailableSmall 4-Pin SOP PackageFlammability Rating UL 94 V-0 ApplicationsSecurityPassive Infrared Detectors (PIR)Data SignallingSensor CircuitryInstrumentationMultiplexersData AcquisitionElectronic SwitchingI/O SubsystemsMeters (Watt-Hour, Water, Gas)Medical Equipment—Patient/Equipment IsolationAerospaceIndustrial Controls ApprovalsUL Recognized Component: File E76270CSA Certified Component: Certificate 1172007EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003 DatasheetYou can download the datasheet from the link given below:CPC1017NTR-Datasheet Product AttributesManufacturer:IXYSProduct Category:Solid State Relays - PCB MountPackaging:ReelPackaging:Cut TapePackaging:MouseReelMounting Style:PCB MountLoad Current Rating:100 mALoad Voltage Rating:60 VDCRelay Contact Form:1 Form A (SPST-NO)Control Voltage Range:900 mVDC to 1.4 VDCPackage / Case:SOP-4Output Type:MOSFETInput Current:50 mAMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature:+ 85 ℃Length:4.089 mmWidth:3.81 mmHeight:2.184 mmSeries:CPC1017Brand:IXYS Integrated CircuitsContact Form:SPST (1 Form A)Input to Output Isolation Method:OptocouplerMoisture Sensitive:YesPd - Power Dissipation:400 mWProduct:Solid State RelaysProduct Type:SSR - Solid State RelaysFactory Pack Quantity:2000Subcategory:RelaysTermination Style:SMD/SMTTradename:ClareType:MiniatureUnit Weight:0.005644 oz ManufacturerIXYS Integrated Circuits, now part of Littelfuse, designs, manufactures, and markets high-voltage integrated circuits (ICs) and optically isolated Solid State Relays (OptoMOS®) for the communication, industrial, power, and consumer markets.As a pioneer in the development of Solid State Relays (SSRs), we have become a leading supplier to the telecommunications, security, utility metering, and industrial control industries. IXYS Integrated Circuits SSR solutions are rapidly replacing older electromechanical devices in many applications, and enhancing overall system performance. We continue to develop leadership products that offer higher levels of integration and electrical performance. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. Frequently Asked Questions1.What is the difference between a relay and a solid state relay?The main difference between solid state relays and general relays is that there is no movable contacts in solid state relay (SSR).Thus, SSR have a wide range of features that mechanical relays do not have. The most significant feature of SSR is that they do not employ switching contacts that will wear out physically. 2.Are solid state relays efficient?The operating frequency (or switching rate) of solid state relays is several to several tens of times that of electromagnetic relays, which enables SSRs to be used in equipment that requires high efficiency. 3.Where are solid state relays used?The most common application of the solid state relay is the load switching of AC load. A number of household circuits have solid state relays for AC load switching. Solid state relays have different applications with the power control, moreover, different solid state relay are used for heater controls. 

Product OverviewThe MAX30101 is an integrated pulse oximetry and heartrate monitor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30101 provides a complete system solution to ease the design-in process for mobile and wearable devices. This blog will introduce MAX30101EFD+ systematically from its features, pinout to its specifications, applications, also including MAX30101EFD+ datasheet and so much more. Video: Skin Electronics │ Biometric Sensors │ Semiconductor Technology CatalogProduct OverviewMAX30101EFD+ FeaturesMAX30101EFD+ PinoutMAX30101EFD+ ApplicationsMAX30101EFD+ System DiagramMAX30101EFD+ CAD ModelsMAX30101EFD+ Functional DiagramsMAX30101EFD+ Typical Application CircuitsMAX30101EFD+ SpecificationMAX30101EFD+ ManufacturerMAX30101EFD+ DatasheetUsing WarningsMAX30101EFD+ FAQ MAX30101EFD+ FeaturesHeart-Rate Monitor and Pulse Oximeter Sensor inLED Reflective SolutionTiny 5.6mm x 3.3mm x 1.55mm 14-Pin Optical Module     - Integrated Cover Glass for Optimal, Robust PerformanceUltra-Low-Power Operation for Mobile Devices     - Programmable Sample Rate and LED Current for Power Savings     - Low-Power Heart-Rate Monitor (< 1mW)     - Ultra-Low Shutdown Current (0.7μA, typ)Fast Data Output Capability     - High Sample RatesRobust Motion Artifact Resilience     - High SNR-40°C to +85°C Operating Temperature Range MAX30101EFD+ PinoutThe following figure is the diagram of MAX30101EFD+ pinout. MAX30101EFD+ Pinout MAX30101EFD+ ApplicationsWearable DevicesFitness Assistant DevicesSmartphonesTablets MAX30101EFD+ System DiagramThe following is the system diagram of MAX30101EFD+. MAX30101EFD+ System Diagram MAX30101EFD+ CAD ModelsThe followings are MAX30101EFD+ Symbol, Footprint, and 3D Model. MAX30101EFD+ Symbol MAX30101EFD+ Footprint MAX30101EFD+ 3D Model MAX30101EFD+ Functional DiagramsThe following figure shows the functional diagram of MAX30101EFD+. MAX30101EFD+ Functional Diagram MAX30101EFD+ Typical Application CircuitsThe following is the circuit diagram of MAX30101EFD+. MAX30101EFD+ Circuit Diagram MAX30101EFD+ SpecificationAttributeValueSensor FunctionOximeter SensorOutput TypeDigitalInterface TypeI2CAccuracy±1°CMounting TypeSurface MountPin Count14Operating Temperature Range-40 to +85 °CMinimum Operating Temperature-40 °CMaximum Operating Temperature+85 °CMinimum Operating Supply Voltage1.7 VMaximum Operating Supply Voltage2 VLength5.7mmHeight1.57mmWidth3.4mmDimensions5.7 x 3.4 x 1.57mmResolution18 (Typ.) bit MAX30101EFD+ ManufacturerMaxim Integrated provides ease of design, and speeds time to market, through analog integration. The company's analog ICs offer extra features and functionality carefully designed to streamline circuit and simplify design. Look to Maxim for solutions for consumer electronics, personal computers and peripherals, mobile devices, wireless and fiber communications, test equipment, instrumentation, video displays, and automotive applications. Maxim’s analog and mixed-signal solutions include data converters, interface circuits, power, RF wireless circuits, clocks and oscillators, microcontrollers (MCUs), operational amplifiers (op amps), and sensors. MAX30101EFD+ DatasheetYou can download MAX30101EFD+ datasheet from the link given below:MAX30101EFD+ Datasheet Using WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. MAX30101EFD+ FAQWhat is a biometric sensor?A biometric sensor is an identification and authentication device. These devices use automated methods of verifying or recognizing the identity, of a living person, based on a physical attribute. These attributes include fingerprints, facial images, iris and voice recognition. How does a biometric sensor work?Fingerprint scanners work by capturing the pattern of ridges and valleys on a finger. The information is then processed by the device's pattern analysis/matching software, which compares it to the list of registered fingerprints on file. Most all smartphones with fingerprint scanners use capacitive sensors. How is biometrics used?Biometrics is the measurement and statistical analysis of people's unique physical and behavioral characteristics. The technology is mainly used for identification and access control or for identifying individuals who are under surveillance.  

Catalog STM32F103CBT7 Product Overview STM32F103CBT7 CAD Models STM32F103CBT7 Pinout STM32F103CBT7 Block Diagram STM32F103CBT7 Features STM32F103CBT7 Datasheet STM32F103CBT7 Specifications STM32F103CBT7 Manufacturer Using Warning STM32F103CBT7 FAQ   Product Overview The STM32F103xx medium-density performance line family incorporates the highperformance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, highspeed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.   The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.   The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.   These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.   STM32F103CBT7 CAD Models Figure: PCB Symbol   Figure: Footprint     Figure: 3D Models   STM32F103CBT7 Pinout Figure: Pinout   STM32F103CBT7 Block Diagram Figure: Block Diagram   STM32F103CBT7 Features 1)ARM® 32-bit Cortex®-M3 CPU Core – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division   2)Memories – 64 or 128 Kbytes of Flash memory – 20 Kbytes of SRAM   3)Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR, and programmable voltage detector (PVD) – 4-to-16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC – PLL for CPU clock – 32 kHz oscillator for RTC with calibration   4)Low-power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers   5)2 x 12-bit, 1 µs A/D converters (up to 16 channels) – Conversion range: 0 to 3.6 V – Dual-sample and hold capability – Temperature sensor   6)DMA – 7-channel DMA controller – Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs   7)Up to 80 fast I/O ports – 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant   8)Debug mode – Serial wire debug (SWD) & JTAG interfaces   9)7 timers – Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input – 16-bit, motor control PWM timer with deadtime generation and emergency stop – 2 watchdog timers (Independent and Window) – SysTick timer 24-bit downcounter   10)Up to 9 communication interfaces – Up to 2 x I2C interfaces (SMBus/PMBus) – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to 2 SPIs (18 Mbit/s) – CAN interface (2.0B Active) – USB 2.0 full-speed interface   11)CRC calculation unit, 96-bit unique ID   12)Packages are ECOPACK®   STM32F103CBT7 Datasheet You can download the datasheet from the link given below: Datasheet   STM32F103CBT7 Specifications TypeDescriptionCategoryIntegrated Circuits (ICs)Embedded - MicrocontrollersMfrSTMicroelectronicsSeriesSTM32F1PackageTrayPart StatusActiveCore ProcessorARM® Cortex®-M3Core Size32-BitSpeed72MHzConnectivityCANbus, I²C, IrDA, LINbus, SPI, UART/USART, USBPeripheralsDMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDTNumber of I/O37Program Memory Size128KB (128K x 8)Program Memory TypeFLASHRAM Size20K x 8Voltage - Supply (Vcc/Vdd)2V ~ 3.6VData ConvertersA/D 10x12bOscillator TypeInternalOperating Temperature-40°C ~ 105°C (TA)Mounting TypeSurface MountPackage / Case48-LQFPSupplier Device Package48-LQFP (7x7)Base Product NumberSTM32F103     STM32F103CBT7 Manufacturer STMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands.   Using Warning Note: Please check their parameters and pin configuration before replacing them in your circuit.   STM32F103CBT7 FAQ What is microcontroller and its uses? A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used as an embedded system. The majority of microcontrollers in use today are embedded in other machinery, such as automobiles, telephones, appliances, and peripherals for computer systems.   What does a microcontroller do in a computer? A microcontroller is a computer present in a single integrated circuit which is dedicated to perform one task and execute one specific application. It contains memory, programmable input/output peripherals as well a processor.   How are microcontrollers made? A microcontroller is a single chip microcomputer made through VLSI fabrication. A microcontroller also called an embedded controller because the microcontroller and its support circuits are often built into, or embedded in, the devices they control.  

Catalog Product OverviewSTM8S207R8T6 CAD ModelsSTM8S207R8T6 PinoutSTM8S207R8T6 Block DiagramSTM8S207R8T6 FeaturesSTM8S207R8T6 DatasheetSTM8S207R8T6 SpecificationsSTM8S207R8T6 ManufacturerUsing WarningSTM8S207R8T6 FAQ Product OverviewThe STM8S20xxx performance line 8-bit microcontrollers offer from 32 to 128 Kbytes Flash program memory. They are referred to as high-density devices in the STM8S microcontroller family reference manual. All STM8S20xxx devices provide the following benefits: reduced system cost, performance robustness, short development cycles, and product longevity. The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog, and brown-out reset. Device performance is ensured by 20 MIPS at 24 MHz CPU clock frequency and enhanced characteristics which include robust I/O, independent watchdogs (with a separate clock source), and a clock security system. Short development cycles are guaranteed due to application scalability across a common family product architecture with compatible pinout, memory map and modular peripherals. Full documentation is offered with a wide choice of development tools. Product longevity is ensured in the STM8S family thanks to their advanced core which is made in a state-of-the art technology for applications with 2.95 V to 5.5 V operating supply.STM8S207R8T6 CAD ModelsFigure: Footprint  Figure: 3D Models STM8S207R8T6 PinoutFigure: Pinout  STM8S207R8T6 Block DiagramFigure: Block Diagram STM8S207R8T6 Features1)Core-Max fCPU: up to 24 MHz, 0 wait states @ fCPU ≤16 MHz-Advanced STM8 core with Harvard architecture and 3-stage pipeline-Extended instruction set-Max 20 MIPS @ 24 MHz 2)Memories-Program: up to 128 Kbytes Flash; data retention 20 years at 55 °C after 10 kcycles-Data: up to 2 Kbytes true data EEPROM; endurance 300 kcycles-RAM: up to 6 Kbytes 3)Clock, reset and supply management-2.95 to 5.5 V operating voltage-Low power crystal resonator oscillator-External clock input-Internal, user-trimmable 16 MHz RC-Internal low power 128 kHz RC-Clock security system with clock monitor-Wait, active-halt, & halt low power modes-Peripheral clocks switched off individually-Permanently active, low consumption power-on and power-down reset 4)Interrupt management-Nested interrupt controller with 32 interrupts-Up to 37 external interrupts on 6 vectors 5)Timers-2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)-Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, deadtime insertion and flexible synchronization-8-bit basic timer with 8-bit prescaler-Auto wakeup timer-Window watchdog, independent watchdog 6)Communications interfaces-High speed 1 Mbit/s active beCAN 2.0B-UART with clock output for synchronous operation - LIN master mode-UART with LIN 2.1 compliant, master/slavemodes and automatic resynchronization-SPI interface up to 10 Mbit/s-I2C interface up to 400 Kbit/s 7)10-bit ADC with up to 16 channels 8)I/Os-Up to 68 I/Os on an 80-pin package including 18 high sink outputs-Highly robust I/O design, immune against current injection-Development support-Single wire interface module (SWIM) and debug module (DM)-96-bit unique ID key for each device STM8S207R8T6 DatasheetYou can download the datasheet from the link given below:DatasheetSTM8S207R8T6 SpecificationsTypeDescriptionCategoryIntegrated Circuits (ICs)Embedded - MicrocontrollersMfrSTMicroelectronicsSeriesSTM8SPackageTrayPart StatusActiveCore ProcessorSTM8Core Size8-BitSpeed24MHzConnectivityI²C, IrDA, LINbus, SPI, UART/USARTPeripheralsBrown-out Detect/Reset, POR, PWM, WDTNumber of I/O52Program Memory Size64KB (64K x 8)Program Memory TypeFLASHEEPROM Size1.5K x 8RAM Size6K x 8Voltage - Supply (Vcc/Vdd)2.95V ~ 5.5VData ConvertersA/D 16x10bOscillator TypeInternalOperating Temperature-40°C ~ 85°C (TA)Mounting TypeSurface MountPackage / Case64-LQFPBase Product NumberSTM8 STM8S207R8T6 ManufacturerSTMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. STM8S207R8T6 FAQWhat is microcontroller and its uses?A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used as an embedded system. The majority of microcontrollers in use today are embedded in other machinery, such as automobiles, telephones, appliances, and peripherals for computer systems. What is the difference of microprocessor and microcontroller?Brief overview: Microprocessor consists of only a Central Processing Unit, whereas Micro Controller contains a CPU, Memory, I/O all integrated into one chip. The microprocessor uses an external bus to interface to RAM, ROM, and other peripherals, on the other hand, Microcontroller uses an internal controlling bus. How are microcontrollers made?A microcontroller is a single chip microcomputer made through VLSI fabrication. A microcontroller also called an embedded controller because the microcontroller and its support circuits are often built into, or embedded in, the devices they control.