Maxim Integrated MAX532AEWE

General Description

The MAX532 is a complete, dual, serial-input, 12-bit multiplying digital-to-analog converter (MDAC) with out put amplifiers. No external user trims are required to achieve full specified performance. The MAX532’s 3-wire serial interface minimizes the number of package pins, so it uses less board space than parallel-interface parts. The interface is SPI™, QSPI™ and Microwire™ compatible. A serial output, DOUT, allows cascading of two or more MAX532s and read-back of the data written to the device.
The device’s serial interface minimizes digital-noise feedthrough from its logic pins to its analog outputs. Serial interfacing also simplifies opto-coupler-isolated or transformer-isolated applications.
The MAX532 is specified with ±12V to ±15V power supplies. All logic inputs are TTL and CMOS compatible. It comes in space-saving 16-pin DIP and wide SO packages.

Features

♦ Two 12-Bit MDACs with Output Amplifiers
♦ Fast, 6MHz 3-Wire Interface
♦ SPI, QSPI, and Microwire Compatible
♦ ±12V Output Swing
♦ ±10mA Output Current
♦ 2.5µs Settling Time to ±1/2LSB
♦ Guaranteed Monotonic Over Temperature
♦ Low Integral Nonlinearity: ±1/2LSB Max
♦ Low Gain Tempco: 2ppm/°C
♦ Operates from ±12V to ±15V Supplies
♦ Power-On Reset
♦ Available in 16-Pin DIP and Wide SO Packages

Applications

Automatic Test Equipment
Arbitrary Waveform Generators
Programmable-Gain Amplifiers
Motion Control Systems
Servo Controls