STMicroelectronics STPM32TR

STPM32TR Description

The STPM3x is an ASSP family designed for high accuracy measurement of power and energies in power line systems using the Rogowski coil, current transformer or shunt current sensors. The STPM3x provides instantaneous voltage and current waveforms and calculates RMS values of voltage and currents, active, reactive and apparent power and energies. The STPM3x is a mixed signal IC family consisting of an analog and a digital section. Up to two programmable gain low-noise, low-offset amplifiers and up to four 2nd order 24-bit sigma-delta ADCs, two bandgap voltage references with separate temperature adjustment, a low drop voltage regulator, and DC buffers comprise the analog component. A digital filtering stage, a hardwired DSP, DFE to the input, and a serial communication interface comprise the digital part (UART or SPI). The STPM3x is entirely customizable and provides for quick digital system calibration in a single point throughout the whole current dynamic range.

STPM32TR Features

 Active power accuracy:
– < 0.1% error over 5000: 1 dynamic range
– < 0.5% error over 10000: 1 dynamic range
 Exceeds 50-60 Hz EN 50470-x, IEC 62053-2x, ANSI12.2x standard requirements for AC watt meters
 Reactive power accuracy:
– < 0.1% error over 2000:1 dynamic range
 Dual mode apparent energy calculation
 Instantaneous and averaged power
 RMS and instantaneous voltage and current
 Under and overvoltage detection (sag and swell) and monitoring
 Overcurrent detection and monitoring
 UART and SPI serial interface with programmable CRC polynomial verification
 Programmable LED and interrupt outputs
 Four independent 24-bit 2nd order sigma-delta ADCs
 Two programmable gain chopper stabilized low-noise and low-offset amplifiers
 Bandwidth 3.6 kHz at -3 dB
 Vcc supply range 3.3 V ± 10%
 Supply current Icc 4.3 mA (STPM32)
 Input clock frequency 16 MHz, Xtal or external source
 Twin precision voltage reference: 1.18 V with independent programmable TC, 30 ppm/°C typ.
 Internal low drop regulator at 3 V (typ.)
 QFN packages
 Operating temperature from 40 °C to +85 °C