The Kynix Components

Catalog Product Overview STM8S103F3P6 CAD Models STM8S103F3P6 Pinout STM8S103F3P6 Block Diagram STM8S103F3P6 Features STM8S103F3P6 Datasheet STM8S103F3P6 Specifications STM8S103F3P6 Manufacturer Using Warning STM8S103F3P6 FAQ   Product Overview The STM8S103F2/x3 access line 8-bit microcontrollers offer 8 Kbyte Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in this family as low-density. They provide the following benefits: performance, robustness, and reduced system cost.   Device performance and robustness are ensured by advanced core and peripherals made in a state-of-the art technology, a 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.   The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators,watchdog and brown-out reset.   STM8S103F3P6 CAD Models Figure: STM8S103F3P6 PCB Symbol   Figure: STM8S103F3P6 Footprint   Figure: STM8S103F3P6 3D Models   STM8S103F3P6 Pinout Figure: STM8S103F3P6 Pinout   STM8S103F3P6 Block Diagram Figure: STM8S103F3P6 Block Diagram   STM8S103F3P6 Features 1)Core 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipelineExtended instruction set   2)Memories Program memory: 8 Kbyte Flash; data retention 20 years at 55 °C after 10 kcycleData memory: 640 byte true data EEPROM; endurance 300 kcycleRAM: 1 Kbyte   3)Clock, reset and supply management 2.95 to 5.5 V operating voltageFlexible clock control, 4 master clock sources – Low power crystal resonator oscillator – External clock input – Internal, user-trimmable 16 MHz RC – Internal low-power 128 kHz RC Clock security system with clock monitorPower management: – Low-power modes (wait, active-halt, halt) – Switch-off peripheral clocks individually Permanently active, low-consumption poweron and power-down reset   4)Interrupt management Nested interrupt controller with 32 interruptsUp to 27 external interrupts on 6 vectors   5)Timers Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)8-bit basic timer with 8-bit prescalerAuto wake-up timerWindow watchdog and independent watchdog timers   6)Communication interfaces UART with clock output for synchronous operation, SmartCard, IrDA, LIN master modeSPI interface up to 8 Mbit/sI2C interface up to 400 kbit/s   7)Analog to digital converter (ADC) 10-bit, ±1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog   8)I/Os Up to 28 I/Os on a 32-pin package including 21 high sink outputsHighly robust I/O design, immune against current injection   9)Unique ID 96-bit unique key for each device   STM8S103F3P6 Datasheet You can download the datasheet from the link given below: Datasheet   STM8S103F3P6 Specifications TypeDescriptionCategoryIntegrated Circuits (ICs)Embedded - MicrocontrollersMfrSTMicroelectronicsSeriesSTM8SPart StatusActiveCore ProcessorSTM8Core Size8-BitSpeed16MHzConnectivityI²C, IrDA, LINbus, SPI, UART/USARTPeripheralsBrown-out Detect/Reset, POR, PWM, WDTNumber of I/O16Program Memory Size8KB (8K x 8)Program Memory TypeFLASHEEPROM Size640 x 8RAM Size1K x 8Voltage - Supply (Vcc/Vdd)2.95V ~ 5.5VData ConvertersA/D 5x10bOscillator TypeInternalOperating Temperature-40°C ~ 85°C (TA)Mounting TypeSurface MountPackage / Case20-TSSOP (0.173", 4.40mm Width)Supplier Device Package20-TSSOPBase Product NumberSTM8   STM8S103F3P6 Manufacturer STMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands.   Using Warning Note: Please check their parameters and pin configuration before replacing them in your circuit.   STM8S103F3P6 FAQ What is a STM8S103F3P6 microcontroller? STM8S103F3P6 microcontroller unit has 640 Bit ROM, 10-Bit 5-Channels ADC, 1kB RAM and with a program memory size of 8kB. Other than these features, it provides I2C, SPI, and UART communication support with 7 timers.   What is MCU core?A microcontroller (MCU for microcontroller unit) is a small computer on a single metal-oxide-semiconductor (MOS) integrated circuit (IC) chip. A microcontroller contains one or more CPUs (processor cores) along with memory and programmable input/output peripherals.   What is microcontroller and its uses? A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used as an embedded system. The majority of microcontrollers in use today are embedded in other machinery, such as automobiles, telephones, appliances, and peripherals for computer systems.  

Product OverviewThe TDA1543 is a monolithic integrated dual 16-bit digital-to-analog converter (DAC) designed as an economy version for use in hi-fi digital audio equipment such as Compact Disc players, digital tape or cassette recorders, digital sound in TV sets and in digital amplifiers. This blog will introduce TDA1543 systematically from its features, pinout to its specifications, applications, also including TDA1543 datasheet and so much more. Video: ESP8266 MP3 Player with I2S DAC TDA1543 CatalogProduct OverviewTDA1543 FeaturesTDA1543 PinoutTDA1543 Pin ConfigurationTDA1543 ApplicationsTDA1543 CAD ModelsTDA1543 Circuit DiagramTDA1543 Block DiagramTDA1543 PackageTDA1543 SpecificationTDA1543 ManufacturerTDA1543 DatasheetUsing WarningsTDA1543 FAQ TDA1543 FeaturesLow distortion16-bit dynamic range4 × oversampling possibleSingle 5 V power supplyNo external components requiredNo requirement for external deglitcher circuitry due to fast settling output currentAdjustable bias currentInternal timing and control circuitsI2S input format: time multiplexed, two's complement, TTL. TDA1543 PinoutThe following figure is the diagram of TDA1543 pinout. TDA1543 Pinout TDA1543 Pin ConfigurationSYMBOLPINDESCRIPTIONBCK1bit clock inputWS2word select inputDATA3data inputGND4groundVdd5+5 V supply voltageAOL6left channel voltage outputVref 7reference voltage outputAOR8right channel output TDA1543 ApplicationsCompact disc playersDigital tape or cassetteRecordersDigital sound in TV setsDigital amplifiers TDA1543 CAD ModelsThe followings are TDA1543 Symbol, Footprint, and 3D Model. TDA1543 Symbol TDA1543 Footprint TDA1543 3D Model TDA1543 Circuit DiagramThe followings are circuits at the input and output pins. TDA1543 Circuit Diagram TDA1543 Block DiagramThe following figure shows the block diagram of TDA1543. TDA1543 Block Diagram TDA1543 PackageThe following diagram shows the TDA1543 package. TDA1543 Package TDA1543 SpecificationManufacturer:Philips SemiconductorsNumber of Bits:16Operating Temperature-Max:85 °COperating Temperature-Min:-30 °CPower Supplies:5 VSubcategory:Other ConvertersSupply Current-Max:60 mASupply Voltage-Nom:5 VTerminal Pitch:2.54 mmTerminal Position:DUALTerminal Form:THROUGH-HOLE TDA1543 ManufacturerPhilips Semiconductors is now NXP Semiconductors. NXP Semiconductors, formerly Philips Semiconductors, has fifty years of innovation and a rich IP portfolio that firmly establishes NXP as Europe's second largest semiconductor company. TDA1543 DatasheetYou can download TDA1543 datasheet from the link given below:TDA1543 Datasheet Using WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. TDA1543 FAQWhat is digital to analog converter examples?An example of a DAC device is a modem. A modem requires DAC to convert data to analog signals, which can be carried by a telephone wire. Another example of a DAC device is a video adapter. What are the types of digital to analog converter?There are basically four types of Digital to Analog Converter circuits namely: Binary Weighted Resistor D/A Converter Circuit, Binary ladder or R–2R ladder D/A Converter Circuit, Segmented DAC, Delta-Sigma DAC. Why do we use DAC?DACs are commonly used in music players to convert digital data streams into analog audio signals. They are also used in televisions and mobile phones to convert digital video data into analog video signals. These two applications use DACs at opposite ends of the frequency/resolution trade-off. What is difference between ADC and DAC?An ADC takes an analog signal and converts it into a binary one, while a DAC converts a binary signal into an analog value. Why do we need ADC and DAC?Analog to Digital Converter (ADC) and Digital to Analog Converter (DAC) are very important components in electronic equipment. Since most real world signals are analog, these two converting interfaces are necessary to allow digital electronic equipments to process the analog signals.

Catalog Description CAD Models Pin Connections Representative Block Diagram Marking Diagram Timing Diagram Features Datasheet Product Attributes Manufacturer Using Warning Frequently Asked Questions Description The TL494 is a fixed–frequency pulse width modulation control circuit, incorporating the primary building blocks required for the control of a switching power supply. An internal–linear sawtooth oscillator is frequency– programmable by two external components, RT and CT.   Output pulse width modulation is accomplished by comparison of the positive sawtooth waveform across capacitor CT to either of two control signals. The NOR gates, which drive output transistors Q1 and Q2, are enabled only when the flip–flop clock–input line is in its low state. This happens only during that portion of time when the sawtooth voltage is greater than the control signals. Therefore, an increase in control–signal amplitude causes a corresponding linear decrease of output pulse width.   The control signals are external inputs that can be fed into the deadtime control, the error amplifier inputs, or the feedback input. The deadtime control comparator has an effective 120 mV input offset which limits the minimum output deadtime to approximately the first 4% of the sawtooth–cycle time. This would result in a maximum duty cycle on a given output of 96% with the output control grounded, and 48% with it connected to the reference line. Additional deadtime may be imposed on the output by setting the deadtime–control input to a fixed voltage, ranging between 0 V to 3.3 V.   CAD Models   Figure: PCB Symbol     Figure: Footprint     Figure: 3D Model   Pin Connections   Figure: Pin Connections   Representative Block Diagram   Figure: Representative Block Diagram   Marking Diagram   Figure: Marking Diagram   Timing Diagram   Figure:Timing Diagram   Features Complete Pulse Width Modulation Control CircuitryOn–Chip Oscillator with Master or Slave OperationOn–Chip Error AmplifiersOn–Chip 5.0 V ReferenceAdjustable Deadtime ControlUncommitted Output Transistors Rated to 500 mA Source or SinkOutput Control for Push–Pull or Single–Ended OperationUndervoltage Lockout   Datasheet You can download the datasheet from the link given below: TL494CN-Datasheet   Product Attributes Manufacturer:onsemiProduct Category:Switching ControllersRoHS:NTopology:Boost, Buck, Flyback, Forward, Full-Bridge, Half-Bridge, Push-PullNumber of Outputs:2 OutputSwitching Frequency:300 kHzDuty Cycle - Max:0.45Output Voltage:40 VOutput Current:200 mAMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature+ 85 ℃Mounting Style:Through HolePackage / Case:PDIP-16Packaging:TubeBrand:onsemiFall Time:40 nsHeight:3.43 mmLength:19.55 mmOperating Supply Voltage:15 VProduct Type:Switching ControllersRise Time:100 nsSubcategory:PMIC - Power Management ICsType:Voltage Mode PWM ControllersUnit Weight:0.057419 oz   Manufacturer ON Semiconductor is an American semiconductor supplier company, formerly in the Fortune 500, but dropping into the Fortune 1000 (ranked 512) in 2020.Products include power and signal management, logic, discrete, and custom devices for automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power applications. ON Semiconductor runs a network of manufacturing facilities, sales offices and design centers in North America, Europe, and the Asia Pacific regions. Headquartered in Phoenix, Arizona, ON Semiconductor has revenues of $3.907 billion (2016),which puts it among the worldwide top 20 semiconductor sales leaders.   Using Warning Note: Please check their parameters and pin configuration before replacing them in your circuit.   Frequently Asked Questions What is the use of TL494? TL494 is a PWM controller IC used for power electronics circuits. It comprises of on-chip two error amplifiers an oscillator with adjustable frequency feature, an output flip-flop having pulse steering control, and an output control circuit with feedback.   How does a PWM circuit work? PWM works by pulsating DC current, and varying the amount of time that each pulse stays 'on' to control the amount of current that flows to a device such as an LED. PWM signals are typically square waves, like the one in the illustration below. A PWM signal (square wave) with a 50% duty cycle.   What are the types of PWM? The different PWM techniques are Single pulse width modulation, Multiple pulse width modulation, Phase displacement control, Sinusoidal pulse width modulation, Harmonic Injection modulation, Space Vector pulse width modulation, Hysteresis (Delta) pulse width modulation, Selective Harmonic Elimination and Current.  

CatalogDescriptionCAD ModelsPin ConfigurationFunctional DiagramFeaturesApplicationsDatasheetSpecificationManufacturerUsing WarningFrequently Asked QuestionsDescriptionThe MAX3051 interfaces between the CAN protocol controller and the physical wires of the bus lines in a controller area network (CAN). The MAX3051 provides differential transmit capability to the bus and differential receive capability to the CAN controller. The MAX3051 is primarily intended for +3.3V single-supply applications that do not require the stringent fault protection specified by the automotive industry (ISO 11898). The MAX3051 features four different modes of operation: high-speed, slope-control, standby, and shutdown mode. High-speed mode allows data rates up to 1Mbps. The slope-control mode can be used to program the slew rate of the transmitter for data rates of up to 500kbps. This reduces the effects of EMI, thus allowing the use of unshielded twisted or parallel cable. In standby mode, the transmitter is shut off and the receiver is pulled high, placing the MAX3051 in low-current mode. In shutdown mode, the transmitter and receiver are switched off. The MAX3051 input common-mode range is from -7V to +12V, exceeding the ISO 11898 specification of -2V to +7V. These features, and the programmable slew-rate limiting, make the part ideal for nonautomotive, harsh environments. The MAX3051 is available in 8-pin SO and SOT23 packages and operates over the -40°C to +85°C extended temperature range. CAD Models Figure: PCB Symbol  Figure: Footprint  Figure: 3D Model Pin Configuration Figure: Pin Configuration Functional Diagram Figure: Functional Diagram FeaturesUse 3V Microcontroller with Same LDO         - Low +3.3V Single-Supply OperationCommon Mode Range Exceeds the ISO11898 Standard (-2V to +7V)         - Wide -7V to +12V Common-Mode RangeUses Minimal Board Space         - SOT23 PackageFlexible Operation Optimizes Performance and Power Consumption for Reduced Thermal Dissipation         - Four Operating Modes         - High-Speed Operation Up to 1Mbps         - Slope-Control Mode to Reduce EMI (Up to 500kbps)         - Standby Mode         - Low-Current Shutdown ModeRobust Protection Increases System Reliability         - ±12kV Human Body Model ESD Protection         - Thermal Shutdown         - Current Limiting ApplicationsPrinters JetLinkIndustrial Control and NetworksTelecom BackplaneConsumer Applications DatasheetYou can download the datasheet from the link given below:MAX3051ESA+-Datasheet SpecificationManufacturer:Maxim IntegratedProduct Category:CAN Interface ICMounting Style:SMD/SMTPackage / Case:SOIC-8Series:MAX3051Type:CAN ControllerSupply Voltage - Max:3.465 VSupply Voltage - Min:3.135 VOperating Supply Current:35 mAMinimum Operating Temperature:- 40 ℃Maximum Operating Temperature:+ 85 ℃Packaging:TubeBrand:Maxim IntegratedOperating Supply Voltage:3.3 VProduct:CAN TransceiversProduct Type:CAN Interface ICFactory Pack Quantity:100Subcategory:Interface ICsPart # Aliases:MAX3051Unit Weight:0.019048 oz ManufacturerMaxim Integrated, a subsidiary of Analog Devices, designs, manufactures, and sells analog and mixed-signal integrated circuits for the automotive, industrial, communications, consumer, and computing markets. Maxim's product portfolio includes power and battery management ICs, sensors, analog ICs, interface ICs, communications solutions, digital ICs, embedded security, and microcontrollers. The company is headquartered in San Jose, California, and has design centers, manufacturing facilities, and sales offices worldwide. Using WarningNote: Please check their parameters and pin configuration before replacing them in your circuit. Frequently Asked QuestionsWhat is the use of CAN transceiver?The CAN transceiver has two tasks: Receiving: it adapts signal levels from the bus, to levels that the CAN Controller expects and has protective circuitry that protect the CAN Controller. Sending: it converts the transmit-bit signal received from the CAN Controller into a signal that is sent onto the bus. CAN transceiver types?A CAN transceiver always has two bus pins: one for the CAN high line (CANH) and one for the CAN low line (CANL). This is because physical signal transmission in a CAN network is symmetrical to achieve electromagnetic compatibility, and the physical transmission medium in a CAN network consists of two lines. CAN transceiver module working?The CAN Transceiver Driver module is responsible for handling the CAN transceiver hardware chips on an ECU. The CAN Transceiver is a hardware device, which adapts the signal levels that are used on the CAN bus to the logical (digital) signal levels recognised by a microcon- troller. 

Catalog Product Overview STM32L433CCT3 CAD Models STM32L433CCT3 Pinout STM32L433CCT3 Block Diagram STM32L433CCT3 Features STM32L433CCT3 Datasheet STM32L433CCT3 Specifications STM32L433CCT3 Manufacturer Using Warning STM32L433CCT3 FAQ   Product Overview The STM32L433xx devices are ultra-low-power microcontrollers based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.   The STM32L433xx devices embed high-speed memories (Flash memory up to 256 Kbyte, 64 Kbyte of SRAM), a Quad SPI Flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.   The STM32L433xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.   The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, two DAC channels, an internal voltage reference buffer, a low-power RTC, one generalpurpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.   In addition, up to 21 capacitive sensing channels are available. The devices also embed an integrated LCD driver 8x40 or 4x44, with internal step-up converter.   They also feature standard and advanced communication interfaces, namely three I2Cs, three SPIs, three USARTs and one Low-Power UART, one SAI, one SDMMC, one CAN, one USB full-speed device crystal less, one SWPMI (single wire protocol master interface).   The STM32L433xx operates in the -40 to +85 °C (+105 °C junction), -40 to +105 °C (+125 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V VDD power supply when using internal LDO regulator and a 1.05 to 1.32V VDD12 power supply when using external SMPS supply. A comprehensive set of power-saving modes makes possible the design of low-power applications.   Some independent power supplies are supported: analog independent supply input for ADC, DAC, OPAMP and comparators, and 3.3 V dedicated supply input for USB. A VBAT input makes it possible to backup the RTC and backup registers. Dedicated VDD12 power supplies can be used to bypass the internal LDO regulator when connected to an external SMPS.   STM32L433CCT3 CAD Models Figure: STM32L433CCT3 PCB Symbol   Figure: STM32L433CCT3 Footprint   Figure: STM32L433CCT3 3D Models   STM32L433CCT3 Pinout Figure: STM32L433CCT3 Pinout   STM32L433CCT3 Block Diagram Figure: STM32L433CCT3 Block Diagram   STM32L433CCT3 Features Ultra-low-power with FlexPowerControl – 1.71 V to 3.6 V power supply – -40 °C to 85/105/125 °C temperature range – 200 nA in VBAT mode: supply for RTC and 32x32-bit backup registers – 8 nA Shutdown mode (5 wakeup pins) – 28 nA Standby mode (5 wakeup pins) – 280 nA Standby mode with RTC – 1.0 µA Stop 2 mode, 1.28 µA with RTC – 84 µA/MHz run mode (LDO Mode) – 36 μA/MHz run mode (@3.3 V SMPS Mode) – Batch acquisition mode (BAM) – 4 µs wakeup from Stop mode – Brown out reset (BOR) – Interconnect matrix   Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions   Performance benchmark – 1.25 DMIPS/MHz (Drystone 2.1) – 273.55 CoreMark® (3.42 CoreMark/MHz @ 80 MHz)   Energy benchmark – 347 ULPMark™ CP score – 121 ULPMark™ PP score   Clock Sources – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator for RTC (LSE) – Internal 16 MHz factory-trimmed RC (±1%) – Internal low-power 32 kHz RC (±5%) – Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy) – Internal 48 MHz with clock recovery – 2 PLLs for system clock, USB, audio, ADC   Up to 83 fast I/Os, most 5 V-tolerant   RTC with HW calendar, alarms and calibration   LCD 8× 40 or 4× 44 with step-up converter   Up to 21 capacitive sensing channels: supporttouchkey, linear and rotary touch sensors   11x timers: 1x 16-bit advanced motor-control,1x 32-bit and 2x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (availablein Stop mode), 2x watchdogs, SysTick timer   Memories – Up to 256 KB single bank Flash, proprietary code readout protection – 64 KB of SRAM including 16 KB with hardware parity check – Quad SPI memory interface   Rich analog peripherals (independent supply) – 1x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 µA/Msps – 2x 12-bit DAC output channels, low-power sample and hold – 1x operational amplifier with built-in PGA – 2x ultra-low-power comparators   17x communication interfaces – USB 2.0 full-speed crystal less solution with LPM and BCD – 1x SAI (serial audio interface) – 3x I2C FM+(1 Mbit/s), SMBus/PMBus – 4x USARTs (ISO 7816, LIN, IrDA, modem) – 1x LPUART (Stop 2 wake-up) – 3x SPIs (and 1x Quad SPI) – CAN (2.0B Active) and SDMMC interface – SWPMI single wire protocol master I/F – IRTIM (Infrared interface)   14-channel DMA controller   True random number generator   CRC calculation unit, 96-bit unique ID   Development support: serial wire debug(SWD), JTAG, Embedded Trace Macrocell™   All packages are ECOPACK2 compliant   STM32L433CCT3 Datasheet You can download the datasheet from the link given below: Datasheet   STM32L433CCT3 Specifications TypeDescriptionCategoryIntegrated Circuits (ICs)Embedded - MicrocontrollersMfrSTMicroelectronicsSeriesSTM32L4Part StatusActiveCore ProcessorARM® Cortex®-M4Core Size32-BitSpeed80MHzConnectivityCANbus, I²C, IrDA, LINbus, MMC/SD, QSPI, SAI, SPI, SWPMI, UART/USART, USBPeripheralsBrown-out Detect/Reset, DMA, LCD, PWM, WDTNumber of I/O38Program Memory Size256KB (256K x 8)Program Memory TypeFLASHRAM Size64K x 8Voltage - Supply (Vcc/Vdd)1.71V ~ 3.6VData ConvertersA/D 10x12b; D/A 2x12bOscillator TypeInternalOperating Temperature-40°C ~ 125°C (TA)Mounting TypeSurface MountPackage / Case48-LQFPSupplier Device Package48-LQFP (7x7)Base Product NumberSTM32L433     STM32L433CCT3 Manufacturer STMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands.   Using Warning Note: Please check their parameters and pin configuration before replacing them in your circuit.   STM32L433CCT3 FAQ What is a microcontroller? Microcontroller is a compressed micro computer manufactured to control the functions of embedded systems in office machines, robots, home appliances, motor vehicles, and a number of other gadgets. A microcontroller is comprises components like - memory, peripherals and most importantly a processor.   What is a microcontroller used for? In the office, microcontrollers are used in computer keyboards, monitors, printers, copiers, fax machines, and telephone systems to name a few. In your home, microcontrollers are used in microwave ovens, washers and dryers, security systems, lawn sprinkler station controllers, and music/video entertainment components.   What is the difference of microprocessor and microcontroller? Microprocessor consists of only a Central Processing Unit, whereas Micro Controller contains a CPU, Memory, I/O all integrated into one chip. The microprocessor uses an external bus to interface to RAM, ROM, and other peripherals, on the other hand, Microcontroller uses an internal controlling bus.  

Product OverviewThe STM32F091xB/xC microcontrollers incorporate the high-performance ARM®Cortex®-M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 256 Kbytes of Flash memory and 32 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. The device offers standard communication interfaces (two I2Cs, two SPIs/one I2S, one HDMI CEC and up to eight USARTs), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven 16-bit timers, one 32-bit timer and an advanced-control PWM timer.The STM32F091xB/xC microcontrollers operate in the -40 to +85 °C and -40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications. The STM32F091xB/xC microcontrollers include devices in seven different packages ranging from 48 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included. This blog will introduce STM32F091RCT6 systematically from its features, pinout to its specifications, applications, also including STM32F091RCT6 datasheet and so much more. CatalogProduct OverviewSTM32F091RCT6 FeaturesSTM32F091RCT6 PinoutSTM32F091RCT6 ApplicationsSTM32F091RCT6 Circuit DiagramSTM32F091RCT6 Block DiagramSTM32F091RCT6 Power Supply SchemeSTM32F091RCT6 SpecificationSTM32F091RCT6 ManufacturerSTM32F091RCT6 Datasheet & Reference ManualUsing WarningsSTM32F091RCT6 FAQ STM32F091RCT6 FeaturesMicrocontroller with ARM® 32bit Cortex™-M0 CPU, frequency up to 48MHz in 64 pin LQFP packageCRC calculation unit, 256Kbyte flash memory , 32KB SRAM2V to 3.6V voltage range, power-on/power down reset (POR/PDR)4 to 32MHz crystal oscillator, internal 40KHz RC oscillator52 GPIO, 12-channel DMA controller, 18 capacitive sensing channels(16 ext + 3 int) 12bit ADC, two analogue comparator, one 12-bit D/A converter (with 2 channels)1 (16bit) advanced control, 5 (16bit) 1 (32bit) general purpose and 2 (16bit) timersCalendar RTC with alarm and periodic wakeup from stop/standbySPI (I2S), I2C, USART, CAN and CEC interfacesSerial wire debug (SWD), 96bit unique ID, HDMI CEC wakeup on header reception STM32F091RCT6 PinoutThe following figure is the diagram of STM32F091RCT6 pinout. STM32F091RCT6 Pinout STM32F091RCT6 ApplicationsSTM32F091xB/xC microcontrollers are suitable for a wide range of applications such as application control and user interfaces, hand-held equipment, A/V receivers and digital TV, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms and HVACs. STM32F091RCT6 CAD ModelsThe followings are STM32F091RCT6 Symbol, Footprint, and 3D Model. STM32F091RCT6 Symbol STM32F091RCT6 Footprint STM32F091RCT6 3D Model STM32F091RCT6 Circuit DiagramThe following shows the typical application with an 8 MHz crystal . STM32F091RCT6 Circuit Diagram STM32F091RCT6 Block DiagramThe following figure shows the block diagram of STM32F091RCT6. STM32F091RCT6 Block Diagram STM32F091RCT6 Power Supply SchemeThe following is power supply scheme. Each power supply pair (VDD/VSS, VDDA/VSSA etc.) must be decoupled with filtering ceramic capacitors as shown above. These capacitors must be placed as close as possible to, or below, the appropriate pins on the underside of the PCB to ensure the good functionality of the device. STM32F091RCT6 Power Supply Scheme STM32F091RCT6 SpecificationAttributeValueFamily NameSTM32Package TypeLQFPMounting TypeSurface MountPin Count64Device CoreARM Cortex M0Data Bus Width32bitProgram Memory Size256 kBMaximum Frequency48MHzRAM Size32 kBNumber of SPI Channels2Typical Operating Supply Voltage2 → 3.6 VNumber of Timers2Number of I2C Channels2Timer Resolution16 bit, 32bitADCs19 x 12 bitLength10mmMaximum Operating Temperature+85 °CHeight1.45mmNumber of ADC Units1Number of CAN Channels1Instruction Set ArchitectureRISCDimensions10 x 10 x 1.45mmMinimum Operating Temperature-40 °CNumber of USART Channels8Width10mmProgram Memory TypeFlash STM32F091RCT6 ManufacturerSTMicroelectronics is a global independent semiconductor company and a leader in developing and delivering semiconductor solutions across the spectrum of microelectronics applications. An unrivaled combination of silicon and system expertise, manufacturing strength, Intellectual Property (IP) portfolio, and strategic partners positions, STMicroelectronics is at the forefront of System-on-Chip (SoC) technology and its products play a key role in enabling today's convergence trends. STM32F091RCT6 Datasheet & Reference ManualYou can download STM32F091RCT6 datasheet and reference manual from the link given below:STM32F091RCT6 DatasheetSTM32F091RCT6 Reference ManualUsing WarningsNote: Please check their parameters and pin configuration before replacing them in your circuit. STM32F091RCT6 FAQWhat kind of memory does the stm32f091xb / XC microcontroller?The STM32F091xB/xC microcontrollers incorporate the high-performance ARM ® Cortex ® -M0 32-bit RISC core operating at up to 48 MHz frequency, high-speed embedded memories (up to 256 Kbytes of Flash memory and 32 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. What's the temperature of stm32f103xc high density performance line?The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. What is a microcontroller used for?In the office, microcontrollers are used in computer keyboards, monitors, printers, copiers, fax machines, and telephone systems to name a few. In your home, microcontrollers are used in microwave ovens, washers and dryers, security systems, lawn sprinkler station controllers, and music/video entertainment components. What is microprocessor made of?Microprocessors are made from silicon, quartz, metals, and other chemicals. From start to finish, it takes about 2 months to make a microprocessor. Microprocessors are classified by the size of their data bus or address bus. They are also grouped into CISC and RISC types. What is microcontroller and how it works?Microcontrollers are embedded inside devices to control the actions and features of a product. Hence, they can also be referred to as embedded controllers. Microcontrollers can take inputs from the device they controlling and retain control by sending the device signals to different parts of the device.