Phone

    00852-6915 1330

MPXV2010DP: CAD Models, Datasheet, Features [Video&FAQ]

  • Contents

Calatog

MPXV2010DP Product Overview

MPXV2010DP Related Video Introduction

MPXV2010DP CAD Models

MPXV2010DP Pin Configuration

MPXV2010DP Block Diagram

MPXV2010DP Features

MPXV2010DP Applications

MPXV2010DP Package Dimensions

MPXV2010DP Datasheet

MPXV2010DP Specifications

MPXV2010DP Manufacturer

Using Warning

MPXV2010DP FAQ

 

MPXV2010DP Product Overview

The MPXV2010DP is a silicon pressure sensor with two ports that is temperature adjusted and calibrated. The silicon piezoresistive pressure sensor from the MPX2010 series delivers a very precise and linear voltage output that is directly proportional to the applied pressure. These sensors have an integrated strain gauge and thin film resistor network on a single monolithic silicon die. The sensor has been precisely laser-trimmed for offset calibration, temperature correction, and span.

 

Video Description: A 3-D printed venturi and the MPX5010DP pressure sensor are used to construct a 2-channel fixed-ratio air supply prototype. This is a component of my research as I construct an improved updraft gasifier for biomass fuels of low quality. utilizes steel wool, an Arduino for control, and OpenSCAD for 3D creation!

 

MPXV2010DP CAD Models

The following figure are the MPXV2010DP Symbol, Footprint and 3D Model.

 

 

Figure: PCB Symbol

 

 

Figure: Footprint

 

 

 

Figure: 3D Models

 

MPXV2010DP Pin Configuration

The following figure is MPXV2010DP Pin Configuration.

 

 

Figure: Pin Configuration

Pin Number Pin Name Description
1 GND Ground
2 VOUT+ Voltage output+
3 VS Power supply
4 VOUT- Voltage output-
5 n.a. —
6 n.a. —
7 n.a. —
8 n.a. —

MPXV2010DP Block Diagram

The following figure is MPXV2010DP Block Diagram.

 

 

Figure: Block Diagram

 

MPXV2010DP Features

  • Ratiometric to supply voltage
  • Available in differential configuration
  • Temperature Compensated over 0°C to +85°C
  • Ratiometric to Supply Voltage
  • Differential and Gauge Options
  • Available in Easy-to-Use Tape & Reel

 

MPXV2010DP Applications

  • Medical
  • Industrial
  • Respiratory Diagnostics
  • Air Movement Control
  • Controllers
  • Pressure Switching

 

MPXV2010DP Package Dimensions

The following figure are MPXV2010DP Package Dimensions.

 

 

Figure: Package Dimensions

 

MPXV2010DP Datasheet

You can download the datasheet from the link given below:

MPXV2010DP Datasheet

 

MPXV2010DP Specifications

Type Description
Category Sensors, Transducers
Pressure Sensors, Transducers
Mfr NXP USA Inc.
Series MPXV2010
Package Tray
Product Status Active
Applications Board Mount
Pressure Type Differential
Operating Pressure 1.45PSI (10kPa)
Output Type Wheatstone Bridge
Output 0 mV ~ 25 mV (10V)
Accuracy ±1%
Voltage - Supply 10V ~ 16V
Port Size Male - 0.13" (3.3mm) Tube, Dual
Port Style Barbed
Features Temperature Compensated
Termination Style Gull Wing
Maximum Pressure 10.88PSI (75kPa)
Operating Temperature -40°C ~ 125°C
Package / Case 8-BSOP (0.475", 12.06mm Width) Dual Ports, Same Side
Supplier Device Package 8-SOP
Base Product Number MPXV2010

 

MPXV2010DP Manufacturer

As a top provider of embedded controllers, NXP Semiconductors offers a wide range of MCUs with Arm-based processors and microcontrollers for a range of industries, including automotive, wireless communication, and more. They continue to lead innovation by providing a robust Power Management portfolio, which includes many power supply and battery management solutions, for industrial and automotive applications. Products from NXP are used to construct solutions that assist people, businesses, and the world at large become more proficient.

NXP Semiconductor has purchased Freescale Semiconductor. Parts from Freescale Semiconductor are now included in the NXP family.

 

Using Warning

Note: Please check their parameters and pin configuration before replacing them in your circuit.

 

MPXV2010DP FAQ

What is a Silicon pressure sensor?

Silicon pressure sensors have silicon based sensing diaphragms which have a very high elasticity and semiconductor strain gauges implanted in the silicon substrate which produce a high span sensitivity.

 

How does a silicon pressure sensor work?

In piezoresistive sensors, four resistors are placed on a silicon diaphragm in order to measure the result of strain or physical pressure applied upon them. Any perceptible change in resistance is being converted, through a Wheatstone bridge circuit into an output voltage.

 

Which sensor is used to detect pressure?

Gauge. A gauge sensor (see diagram to the right) measures pressure relative to atmospheric pressure. One side is connected to the system, which may be a pump such as a suction pump, while the other side is vented to the atmosphere.

 

Kynix

Kynix was founded in 2008, specializing in the electronic components distribution business. We adhere to honesty and ethics as our business philosophy and have gradually established an excellent reputation and credibility in our international business. With the accurate quotation, excellent credit, reasonable price, reliable quality, fast delivery, and authentic service, we have won the praise of the majority of customers.

Join our mailing list!

Be the first to know about new products, special offers, and more.

Leave a Reply

We'd love to hear from you! Feel free to share your thoughts and comments below. Rest assured, your email address will remain private.

Name *
Email *
Captcha *
Rating:

Kynix

  • How to purchase

  • Order
  • Search & Inquiry
  • Shipping & Tracking
  • Payment Methods
  • Contact Us

  • Tel: 00852-6915 1330
  • Email: info@kynix.com
  • Follow Us

authentication

Kynix

© 2008-2026 kynix.com all rights reserve.