Microchip Technology ATSAMA5D27A-CNR

Description

The Atmel | SMART SAMA5D3 series is a high-performance, power-efficient embedded MPU based on the ARM Cortex-A5 processor, achieving 536 MHz with power consumption levels below 0.5 mW in low-power mode. The device features a floating point unit for high-precision computing and accelerated data processing, and a high data bandwidth architecture. It integrates advanced user interface and connectivity peripherals and security features.
The SAMA5D3 series features an internal multi-layer bus architecture associated with 39 DMA channels to sustain the high bandwidth required by the processor and the high-speed per iphera l s. The device offers support for DDR2/LPDDR/LPDDR2 and MLC NAND Flash memory with 24-bit ECC.

Features

● Core
̶ ARM Cortex-A5 Processor with ARMv7-A Thumb-2 Instruction Set
̶ CPU Frequency up to 536 MHz
̶ 32 Kbyte Data Cache, 32 Kbyte Instruction Cache,
Virtual Memory System Architecture (VMSA)
̶ Fully Integrated MMU and Floating Point Unit (VFPv4)
● Memories
̶ One 160 Kbyte Internal ROM Single-cycle Access at System Speed,
Embedded Boot Loader: Boot on 8-bit
NAND Flash, SDCard, eMMC, serial DataFlash, selectable Order
̶ One 128 Kbyte Internal SRAM, Single-cycle Access at System Speed
̶ High Bandwidth 32-bit Multi-port Dynamic RAM Controller supporting 512 Mbyte 8 bank
32-bit or 2x16-bit SDRAM devices
̶ Independent Static Memory Controller with datapath scrambling and
SLC/MLC NAND Support with up to 24-bit
Error Correction Code (PMECC)
● System running up to 166 MHz
̶ Reset Controller, Shutdown Controller, Periodic Interval Timer,
Watchdog Timer and Real-time Clock
̶ Boot Mode Select Option, Remap Command
̶ Internal Low-power 32 kHz RC Oscillator and Fast 12 MHz RC Oscillator
̶ Selectable 32768 Hz Low-power Oscillator and 12 MHz Oscillator
̶ One 400 to 1000 MHz PLL for the System and one PLL at 480 MHz optimized
for USB High Speed
̶ 39 DMA Channels including two 8-channel 64-bit Central DMA Controllers
̶ 64-bit Advanced Interrupt Controller
̶ Three Programmable External Clock Signals
̶ Programmable Fuse Box with 256 fuse bits
(of which 192 are available for users)
● Low Power Management
̶ Shutdown Controller
̶ Battery Backup Registers
̶ Clock Generator and Power Management Controller
̶ Very Slow Clock Operating Mode, Software Programmable
Power Optimization Capabilities
● Peripherals
̶ LCD TFT Controller with Overlay, Alpha-blending, Rotation,
Scaling and Color Space Conversion
̶ ITU-R BT. 601/656 Image Sensor Interface
̶ Three HS/FS/LS USB Ports with On-Chip Transceivers
● One Device Controller
● One Host Controller with Integrated Root Hub (3 Downstream Ports)
̶ One 10/100/1000 Mbps Gigabit Ethernet Media Access Controller (GMAC)
with IEEE1588 support
̶ One 10/100 Mbps Ethernet Media Access Controller (EMAC)
̶ Two CAN Controllers with 8 Mailboxes, fully compliant with
CAN 2.0 Part A and 2.0 Part B
̶ Softmodem Interface
̶ Three High Speed Memory Card Hosts (eMMC 4.3 and SD 2.0)
̶ Two Master/Slave Serial Peripheral Interfaces
̶ Two Synchronous Serial Controllers
̶ Three Two-wire Interface up to 400 Kbit/s supporting I2C Protocol and SMBUS
̶ Four USARTs (ISO7816, IrDA, RS-485, SPI, Manchester and Modem Modes)
̶ Two UARTs
̶ One DBGU
̶ Two 3-channel 32-bit Timer/Counters
̶ One 4-channel 16-bit PWM Controller
̶ One 12-channel 12-bit Analog-to-Digital Converter with
Resistive Touchscreen function (Continue ...)