Microchip MXPLAD6.5KP12CA

DESCRIPTION

These 6.5 kW rated transient voltage suppressors (TVS) in a surface mount PLAD package are provided with design features to minimize thermal resistance and cumulative heating. These devices have the ability to clamp dangerous high voltage, short term transients such as those produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Typical applications include lighting and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (VWM) of 10 volt to 48 volts in either unidirectional or bidirectional construction. This product addition expands High reliable PLAD product portfolio. For more information on PLAD products, broad range of TVS devices please visit our website.

FEATURES

• Available in both unidirectional and bidirectional construction (bidirectional with CA suffix).
• High reliability with wafer fabrication and assembly lot traceability.
• All parts surge tested.
• Low profile surface mount package.
• Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hi-Rel Non-Hermetic Products brochure on our web site for more details on the screening options.
• Suppresses transients up to 6,500 W @ 10/1000 μs (see figure 1).
• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020.
• 3σ lot norm screening performed on standby current (ID).
• RoHS compliant (2002/95/EC) devices available.
• Halogen free (IEC 61249-2-21)

APPLICATIONS / BENEFITS

• Protection from switching transients and induced RF.
• Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4.
• Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance:
Class 1,2,3,4,5: MPLAD6.5KP10A to 48CA
• Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance:
Class 1,2,3,4: MPLAD6.5KP10A to 48CA
• Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance:
Class 2,3: MPLAD6.5KP10A to 48CA
Class 4: MPLAD6.5KP10A to 22CA
• Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs at 25 ºC)*:
Level 1,2,3,4: MPLAD6.5KP10A to 48CA
Level 5: MPLAD6.5KP10A to 43CA
• Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs at 25 ºC)*:
Level 1 and 2: MPLAD6.5KP10A to 48CA
Level 3: MPLAD6.5KP10A to 36CA
Level 4: MPLAD6.5KP10A to 12CA
• IPP rating of 40.1 amps to 383 amps.
• VWM rating of 10 volts to 48 volts.
• V(BR)(min) range of 11.1 volts to 53.3 volts.
• VC(MAX) rating of 17 volts to 77.4 volts