Macronix MX29F016TC-90

GENERAL DESCRIPTION

The MX29F016 is a 16-mega bit Flash memory organized as 2M bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F016 is packaged in 40-pin TSOP or 44-pin SOP, 48-pin TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

• Single power supply 5V operation for read, erase and program
• Fast access time: 90/120ns
• Low power consumption
- 30mA maximum active current
- 0.2uA typical standby current
• Command register architecture
- Byte Programming (7us typical)
- Sector Erase:32 equal sector with of 64KByte each
• Auto Erase (chip & sector) and Auto Program
- Automatically erase any combination of sectors with Erase Suspend capability.
- Automatically program and verify data at specified address
• Erase suspend/Erase Resume
- Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.
• Status Reply
- Data polling & Toggle bit for detection of program and erase cycle completion.
• Group Sector protect/unprotect for 5V/12V system.
• Group Sector protection
- Hardware sector protect/unprotect method for each group which consists of two adjacent sectors
- Temporary group sector unprotect allows code changes in previously locked sectors
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
- 40-pin TSOP, 44-pin SOP, 48-pin TSOP
• Compatibility with JEDEC standard
- Pinout and software compatible with single-power supply Flash