CM2010-02MR
Images are for reference only See Product Specifications
Manufacturer Part#:

CM2010-02MR

Product Category: IC Chips
Manufacturer: CMD
Description:
  datasheetCM2010-02MR Datasheet
Package: MSOP-10
Quantity: 743 PCS
Lead Free Status / RoHS Status: Lead free / RoHS Compliant
Moisture Sensitivity Level(MSL): 3(168 Hours)
Real Time Availability
Stock:743 Can Ship Immediately
Enter Quantity:
Minimum:1
Multiples:1
Buy Buy
1+: $0.00000
10+: $0.00000
100+: $0.00000
500+: $0.00000
1000+: $0.00000
Warm Tips:Please fill out the below form and we will contact you as soon as possible.
*Buy Quantity:   Target Price: (USD)
*Contact Name:   Company Name:
*Email:    
Phone: (Including the Country Code)
Remark:
  Submit
SpecificationsPackage PaymentShippingAfter-sales Guarantee
Manufacturer: CMD
Product Category: IC Chips
Features, Applications

PRELIMINARY CM2010 VGA Port Protection with Integrated Sync Buffers

Features

3 channels of ESD protection for RGB output pins meeting IEC-61000-4-2 Level 4 ESD requirements (8kV contact discharge) Very low loading capacitance from ESD protection diodes on VIDEO lines, 4pF typical 3.3/5V 24mA buffer drivers for HSYNC and VSYNC lines VESA Video Signal Standard (VSIS) - Version 1, Rev. 2 Compatible Outputs Compact 10-lead MSOP package Lead-free version available


The CM2010 connects between a video graphics controller, embedded in a graphics adapter card, and the VGA port connector. The CM2010 integrates ESD protection for 3 VGA output signals implemented with low-capacitance current steering diodes such that an ESD pulse is diverted into either the positive supply rail or ground, where it may be safely dissipated. All ESD diodes are designed to safely handle the high current spikes specified by IEC61000-4-2 Level 4 ESD (8kV contact discharge). Two 24mA non-inverting drivers provide buffering for the HSYNC and VSYNC signals from the video controller (SYNC1, SYNC2). These buffers accept low voltage input levels and convert them to CMOS output levels that swing between Ground and VCC_SYNC, which is typically 5V for Legacy VESA compatibility, but can be operated at 3.3V. Additionally, the output impedance of the drivers can be discretely adjusted via external series termination resistors (RT) for maximum flexibility. The output impedance of the drivers can be adjusted over a wide range from 15 to over 100. The CM2010 is supplied a 10-lead MSOP package and is available with optional lead-free finishing.


Applications

VGA and DVI-I ports in: - Desktop and Notebook PCs - Graphics Cards - Set Top Boxes

c 2004 California Micro Devices Corp. All rights reserved. 09/10/04

Standard Finish Pins 10 Package MSOP Ordering Part Number1 CM2010-02MS Part Marking 2010 02MS Lead-free Finish Ordering Part Number1 CM2010-02MR Part Marking 2010 02MR


Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.

LEAD(s) NAME VCC_SYNC VCC_VIDEO VIDEO_2 VIDEO_3 GND SYNC_IN2 SYNC_OUT2 DESCRIPTION This is an isolated supply input for the SYNC_1 and SYNC_2 level shifters and their associated ESD protection circuits. This is a supply pin specifically for the VIDEO_1, VIDEO_2 and VIDEO_3 ESD protection circuits. Video signal ESD protection channel. This pin is typically tied one of the video lines between the VGA controller device and the video connector. Video signal ESD protection channel. This pin is typically tied one of the video lines between the VGA controller device and the video connector. Video signal ESD protection channel. This pin is typically tied one of the video lines between the VGA controller device and the video connector. Ground reference supply pin. Sync signal buffer input. Connects to the VGA controller side of one of the sync lines. Sync signal buffer output. Connects to the video connector side of one of the sync lines. Sync signal buffer input. Connects to the VGA controller side of one of the sync lines. Sync signal buffer output. Connects to the video connector side of one of the sync lines.


c 2004 California Micro Devices Corp. All rights reserved.

Specifications

PARAMETER VCC_VIDEO and VCC_SYNC Supply Voltage Inputs ESD Clamp Diode Forward DC Current (applies only to SYNC drivers) DC Voltage at any channel Input Operating Temperature Range Storage Temperature Range RATING 6.0 8 [GND 0.5] to [VCC to +150 UNITS V °C


SYMBOL ICC PARAMETER VCC Supply Current CONDITIONS VCC_SYNC = 5V; SYNC inputs at GND or VCC_SYNC; SYNC outputs unloaded VCC_SYNC = 5V; SYNC inputs at 3.0V; SYNC outputs unloaded VF VIH VIL VOH Diode Forward Voltage Logic High Input Voltage Logic Low Input Voltage Logic High Output Voltage = 10mA VCC_SYNC = 5.0V; Note 2 VCC_SYNC = 5.0V; Note 2 IOH = 8mA, VCC_SYNC = 3.0V; Note 2 IOH = 12mA, VCC_SYNC = 5.0V; Note 2 IOH = 24mA, VCC_SYNC = 5.0V; Note 2 VOL Logic Low Output Voltage IOL = 8mA, VCC_SYNC = 3.3V; Note 2 IOL = 12mA, VCC_SYNC = 5.0V; Note 2 IOL = 24mA, VCC_SYNC = 5.0V; Note 2 ROUT IIN SYNC Driver Output Resistance Input Current VIDEO Inputs SYNC_IN1, SYNC_IN2 Inputs CIN_VID tPLH tPHL tR, tF VESD VCL VIDEO Input Capacitance SYNC Driver L H Propagation Delay SYNC Driver H L Propagation Delay SYNC Driver Output Rise & Fall Times ESD Withstand Voltage VCC_SYNC = 5.0V; SYNC Inputs at GND or 3.0V VCC_VIDEO = 5.0V; VIN = VCC_VIDEO or GND; TA=25°C VCC_SYNC = 5.0V; VIN = VCC_SYNC or GND; TA=25°C VCC_VIDEO = 5.0V; VIN = 1MHz; Note 4 VCC_VIDEO = 2.5V; VIN = 1MHz; Note = 10pF; VCC = 5.0V; Input tR and = 10pF; VCC = 5.0V; Input tR and = 10pF; VCC = 5.0V; Input tR and tF 5ns; Notes VCC_VIDEO = VCC_SYNC = 5V; Notes MIN TYP MAX UNITS ns kV


Clamping Voltage during ESD Discharge Notes 3 and 4 MIL-STD-883 (Method 3015), 8kV Positive Transients Negative Transients


Note 1: All parameters specified over standard operating conditions unless otherwise noted. Note 2: These parameters apply only to the SYNC drivers. Note 3: Per the IEC-61000-4-2 International ESD Standard, Level 4 contact discharge method. BYP, VCC must be bypassed to GND via a low impedance ground plane with a 0.22μF, low inductance, chip ceramic capacitor at each supply pin. ESD pulse is applied between the applicable pins and GND. ESD pulses can be positive or negative with respect to GND. Applicable pins are: VIDEO_1, VIDEO_2 and VIDEO_3. All other pins are ESD protected to the industry standard ±2kV Human Body Model (MIL-STD-883, Method 3015). Note 4: This parameter is guaranteed by design and characterization. Note 5: Rise and fall times measured between 0.5V and 2.4V.

Search Part number : "CM201" Included word is 4
Part Number Manufacturer Package Quantity Description
CM2010-02MS CMD MSOP-10 4894
CM2012F220KE SAMHWA 9060
CM201-LF CMO BGA238 442
CM201 ON SOP8 732
CM2010-02MR RELATED PRODUCT PICTURE
left
  • CM2010-02MS
  • CM2012F220KE
  • CM201-LF
  • CM201
right
CM2010-02MR Related keyword.
  • CM2010-02MR Price
  • CM2010-02MR Distributor
  • CM2010-02MR Manufacturer
  • CM2010-02MR Technical Data
  • CM2010-02MR PDF
  • CM2010-02MR Datasheet
  • CM2010-02MR Picture
  • CM2010-02MR Image
  • CM2010-02MR Part
  • CM2010-02MR Stock
  • CM2010-02MR Inventory
  • CM2010-02MR Rfq
  • Buy CM2010-02MR
  • CM2010-02MR Inquiry
  • CM2010-02MR Online Order

Comment

Latest Products

AC82GS45 S LB92  Intel

AC82GS45 S LB92IC Chips, ,Chipsets GS45 Express Chipset Mobile FCBGA-1363

Learn More

BD82C216 S LJ8H  Intel

BD82C216 S LJ8HIC Chips, ,Chipsets C216 Chipset Server FCBGA-942

Learn More

BD82C604 S LJKJ  Intel

BD82C604 S LJKJIC Chips, ,Chipsets C604 Chipset Server FCBGA-901

Learn More

DH8920CC S LJVX  Intel

DH8920CC S LJVXIC Chips, ,Chipsets 8920 Chipset Server FCBGA-942

Learn More

BD3450 S LGZY  Intel

BD3450 S LGZYIC Chips, ,Chipsets 3450 Chipset Server FCBGA-951

Learn More

HOW TO BUY ELECTRONIC COMPONENTS
How to buy
Search
Inquiry
Order
Track
 
Delivery
FedEx
UPS
DHL
TNT
 
Payment Terms
By PayPal
By Credit Card
By Wire Transfer
By Western Union
 
After-sales Service
Quality Control
Guarantee
Return & Replacement
 
 
About us
Company Profile
Our History
Corporate Culture
Contact us
Join us
© 2008-2016 kynix.com all rights reserved.
Tel:00852-81928838    Email:info@kynix.com